E-Z Lok SK31020 spiralgängad insatssats, 304 rostfritt stål, 3/8-24 gängstorlek, 0,750 installerad längd (pack med 10)

Name: E-Z Lok SK31020 spiralgängad insatssats, 304 rostfritt stål, 3/8-24 gängstorlek, 0,750 installerad längd (pack med 10)
Brand: E-Z LOK
SKU: 0847554003633
Price: 81.34 EUR
Availability: InStock

Brand:E-Z LOK

2.5/5

€
81.34

E-Z Lok tillverkar gängade skär för metall, plast och trä. Företaget har sitt huvudkontor i Gardena, Kalifornien.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0847554003633

Kategorier Industri & vetenskap, Spikar, Skruvar & Fästelement, Gängade insatser, Helikalt gängade insatser,

SÄTET INGÅR – Bekvämt kit innehåller gängade insatser för metall, borr, STI-tapp, gängad insatsinstallationsverktyg och tångbrytningsverktyg. FÖR ANVÄNDNING MED APPLIKATIONER – De gängade metallinsatserna är designade för användning med mjuka metaller: aluminium, gjutjärn, magnesium, etc. ROSTFRI STÅLTÅRD – Satsen innehåller gängade insatser i rostfritt stål som är resistenta mot korrosion och tål temperaturer upp till 800°F. SNABBT REPARATION AV SKADA GÄNGAR – Reparera snabbt skadade gängor eller förstärk gängade hål i mjuka metaller med denna spiralformade gängreparationssats.

Brand	E-Z LOK
Country of Origin	United Kingdom
Fastener Type	E
Item model number	SK31020
Manufacturer	E-Z LOK
Material	Stainless Steel
Package Dimensions	8.39 x 4.69 x 1.26 inches; 8.8 Ounces
Size	3/8"-24 Thread Size, 0.750" Installed Length
Thread Size	3/8"-24

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Madelyn Chapman

Excellent Product

Worked perfectly - Saved me $1000, since I didn't have to replace the casting The thread that stripped out had a .5 counter-bore 3/8deep. Then the thread went another 1.25 inches. This was perfect, the tap didn't score the bore at all, and I was able to torque the bolt to the required specification. I will definitely use them again when I strip out another thread. Thanks, Sam

Scritto da: Joy Porter

Wrong size tap!

I ASSUMED that everything in the pack was correct, as it listed the tap as 3/8” x 24. I drilled the hole with the 25/64” bit provided and then tapped it with the tap. I then installed the thread coil. However, when I tried to thread the 3/8x24 bolt, it wouldn’t start. I then discovered the reason was the tap was 3/8x16! I couldn’t back the coil back out! My only solution was to try to retap the coil with my own 3/8x24 tap. This required several hours of time and literally destroyed my tap!!!!

Scritto da: Laurie M. Kiser

Best quality thread repair kit

I have done this process 2 or 3 times before with good results. The hardest part of the job is making the hole and tap straight. This kit has the highest quality tools and the new threads are 100 x stronger than original aluminum alloy. Drill bit is extremely sharp. The bit and tap seemed to self level making diy hand tools ok. Both of the repairs I did were perfectly straight in spite of me. The coil did need A LOT OF lubricant to install correctly. I had to use liquid assembly lube to get the coil to seat properly. Spray lube wasn't enough. Not the cheapest kit but totally worth the extra few dollars.