Eastman 1-1/2 tum Trip Spak badavlopp och bräddavlopp, mässing med förkromad kant, 35201

Name: Eastman 1-1/2 tum Trip Spak badavlopp och bräddavlopp, mässing med förkromad kant, 35201
Brand: Eastman Outdoors
SKU: 0091712352013
Price: 102.52 EUR
Availability: InStock

Brand:Eastman Outdoors

3.2/5

€
102.52

PRODUKTBESKRIVNING Förenkla dina VVS-projekt med Eastman badkarsavloppsbyte. Består av en stark och robust 20 gauge, den här slitstarka avloppsrörskåpan för badkar passar de flesta avlopp i standardstorlek för att möjliggöra enkel installation, och har en kromfinish som smälter in fint med moderna badrumsinredningar. FRÅN TILLVERKAREN Eastman tvåhåls badavfallssats är designad för att passa badkar i standardstorlek. Den har 1-1/2 20-Gauge mässingsrör för en stark anslutning. Detta kit kommer med en 1-1/2 avlopp och förkromad kant för en elegant och modern look.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0091712352013

Kategorier Verkyg & hemförbättring, Köks- och badinredningar, Badrumsinredning, Badrumsvask och badkarstillbehör, Avlopp för handfat & badkar, Badkarsavlopp,

SAMTIDIG DESIGN: Badavloppsskydd har en elegant, modern förkromad kant som smälter in fint med ett brett utbud av badrumsinredningar. VAD INGÅR: Monteringssatsen för badkarsavlopp inkluderar (1) 1-1/2 tums avlopp, (1) överströmningsplatta med två hål, (1) utlösningsspaksstopp och (1) sil av mässing. HÅLLBAR: Badkarets avloppsskydd är sammansatt av 20 gauge mässing för långvarig tillförlitlighet. MÅNGSIDIG: Hårfångare för badkarsavlopp passar enkelt på de flesta badkarsavlopp. BADBADSAVLOPP: Badkarets överloppsavlopp är perfekt för att fånga upp badavfall och är ett utmärkt komplement till dina bad- eller duschtillbehör.

Batteries Required?	‎No
Brand	Eastman Outdoors
Color	Trip-lever
Color	‎Trip-lever
Customer Reviews	4.1 4.1 out of 5 stars 166 ratings 4.1 out of 5 stars
Included Components	‎trip lever
Item Dimensions LxWxH	12.7 x 5.3 x 3.6 inches
Item model number	‎1-1/2 Inch
Item Package Quantity	‎1
Item Weight	1 Pounds
Item Weight	‎1 pounds
Manufacturer	‎Eastman
Material	Brass
Material	‎Brass
Part Number	‎35201
Product Dimensions	‎12.7 x 5.3 x 3.6 inches
Size	‎Trip Lever Bath Waste and Overflow Drain
Style	‎Brass Bath Waste Kit

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: rj

good value

good value for money, long as you know you're prepared to lengthen it with a rubber coupler, or another copper tail pipe. then there's leaks, you need to use extra teflon tape on all joints. you can also use silicone gel. It look me at least 10 tries until I finally got every single joint leak proof all the way to the U trap. a pro plumber will likely just trash this, consider time is money, and they'll just charge you $500 or more for the job. for DIY, it's definitely well worth the money, long as you don't mind putting in more time to figure out the kinks as mentioned above.

Scritto da: Brian white

Good quality product

Solid brass good quality product. A must when doing a renovation of an old bathroom

Scritto da: Mike G

The lower horizontal pipe will probably leak at the tub side but it can be corrected.

As others have already stated, the lower horizontal brass pipe will probably leak at the joint where it connects to the shoe (tub drain mount) but it can be corrected. FYI, get the tube wet and hold your hand over one end of the tube while blowing air with your mouth into the other end ("it's still clean at this point"). You will probably notice air/bubbles from the joint. Anyway, I had already cleaned the brass and was going to just solder the sections together but while trying to remove the "press fit", I discovered that contrary to what other have indicated in reviews, this is not a press joint but is actually a tightly screwed in threaded joint. I was able to grip the two sections in my hands and unscrew them by giving it all I could while flexing them back and forth. There doesn't appear to be any joint compound or tape so it's no wonder it leaks. I wrapped Teflon tape on the threads, reassembled it tightly and the leak is now gone. It's a shame that you have to do anything to a brand new part but this does make it work in a permanent manner without resorting to JB weld, solder or returning it for something else. The brass material and other parts seem to be of good quality although the overflow tube is about 1/2" shorter that my old tube and the strainer bolt is just long enough to catch but they still have enough length to work fine. I think it's still a better solution than a cheap plastic version and it's more affordable than the other brass offerings so for those reasons I would buy it again and just know that some additional tape will be needed.

Scritto da: Lazlo Homer

Warning, shallow tub only.

Looks like a quality product in spite of it's Chinese origin. No nasty solder joints and whatnot. Problem is if your overflow is more than 12" high (as most are these days) the vertical pipe is way short. Too bad.

Scritto da: Teresa

Need to contact seller. The pipe is too short

Need an extension for the overflow/stopper pipe. Would like phone number to inquire about an extension

Scritto da: Jerry Vandervort

Item was just as advertised

Well made. Worked as it should

Scritto da: Erica

Box was broken apart when received and the shoe leaked

Sad that it leaks from a non user install area. Meaning it’s not anything an installer could control. It’s supposed to be solid and cast where it is leaking. I just need Amazon to ship a replacement shoe because I don’t want to uninstall the whole thing.

Scritto da: MAGstar

Easy!

It was much easier to install than I thought it would be. It was virtually identical to the original.