Enbrighten, White & Light Almond, GE Z-Wave Plus Smart Motion Light Dimmer, Fungerar med Alexa, Google Assistant, SmartThings, Wink, Zwave Hub krävs, Repeater/Range Extender, 3-vägskompatibel, 26933

Name: Enbrighten, White & Light Almond, GE Z-Wave Plus Smart Motion Light Dimmer, Fungerar med Alexa, Google Assistant, SmartThings, Wink, Zwave Hub krävs, Repeater/Range Extender, 3-vägskompatibel, 26933
Brand: Enbrighten
SKU: 0030878269339
Price: 120.37 EUR
Availability: InStock

Brand:Enbrighten

3.2/5

€
120.37

Sätt hemautomation i rörelse med Enbrighten Z-Wave In-Wall Smart Motion Dimmer. När den är ihopkopplad med ett kompatibelt nav, styr den fasta smarta dimmern taklampor, väggarmaturer och mer genom individuella kommandon och programmerade inställningar. Trådlöst styr och schemalägg inomhus- eller utomhusarmaturer för enkel hantering av ditt hem. Dina automationsmöjligheter är till synes oändliga när de är anslutna till hubbar från Wink, SmartThings, Home Seer, Vera, Nexia och mer.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0030878269339

Kategorier Verkyg & hemförbättring, Elektrisk, Switch & Dimmers, Väggbrytare, Dimmeromkopplare,

ENKEL INSTALLATION – Kräver installation i väggen inomhus med fasta anslutningar. NEUTRAL KABEL KRÄVS. Inkluderar vita och ljusa mandelknappar (väggplatta ingår ej). Full-range dimningsförmåga för användning med dimbara lysdioder och lågenergilampor samt glödlampor och halogenlampor. Watt som stöds – 600W glödlampa; 150W LED/CFL. Stöd spänning – 120VAC. Drifttemperaturintervall 32-104 grader Fahrenheit. HELTÄCKNING – Z-Wave Plus fungerar med alla tidigare Z-Wave-generationer för att tillåta fortsatt expansion av ditt hemautomationsnätverk. Dimmern kan styra inomhus- och utomhusarmaturer för automation i hela hemmet och upprepar din Z-Wave-signal från ditt nav eller andra enheter för att utöka din räckvidd med upp till 150 fot. Utökat signalområde ökar täckningen för din hemautomatisering för att förbättra din kontroll. 3-VÄGS KLAR – Den smarta enheten fungerar perfekt på egen hand eller integreras sömlöst i multiswitch-inställningar med erforderliga tilläggsomkopplare – modellerna 12723 eller 46199. Upp till fyra tilläggsbrytare kan anslutas till samma enhet. SELECT MOTION CONTROL – Dimmern justerar ljusstyrkan för dimbara LED, CFL, glödlampor och halogenljus från 0-100 procent för att minska energikostnaderna och förbättra glödlampans livslängd. Anpassa dimmern med tre alternativ för rörelsedetektering – beläggning, ledighet och manuell. Närvaroläget slår PÅ/AV belysningen automatiskt, medan belysningen tänds manuellt och släcks automatiskt i ledighetsinställningen. För att avaktivera rörelsesensorn, välj manuell drift. Med fem tidsutlösningsalternativ från fem sekunder till 30 minuter och upp till 180-graders detekteringstäckning, rymmer dimmern alla rum med varierande mängder aktivitet. Njut dessutom av anpassade scener, mångsidig schemaläggning och bekväma varningar med fjärrstyrning och röststyrning när du är ansluten till en kompatibel hubb. RÖSTKONTROLL – ALEXA & GOOGLE ASSISTENT KOMPATIBEL (kräver ett Z-Wave-certifierat nav). Fungerar med följande Z-Wave-certifierade hubbar: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera och mer.

Actuator Type	Push Button
Actuator Type	‎Push Button
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Enbrighten
Brand	‎Enbrighten
Circuit Type	3-way
Circuit Type	‎3-way
Color	‎White & Light Almond
Connectivity Protocol	‎Wi-Fi, Z-Wave
Control Method	‎Voice
Controller Type	‎Nexia, Vera, Google Assistant, Amazon Alexa, SmartThings
Country of Origin	‎China
Customer Reviews	4.1 4.1 out of 5 stars 178 ratings 4.1 out of 5 stars
Included Components	‎1 In-Wall Sensor
International Protection Rating	IP00
International Protection Rating	‎IP00
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	1.5 x 1.5 x 3 inches
Item Dimensions LxWxH	‎1.5 x 1.5 x 3 inches
Item model number	‎26933
Item Package Quantity	‎1
Item Weight	‎7 ounces
Manufacturer	‎Jasco Products Company, LLC
Mechanical Life Expectancy	‎2 years
Mounting Type	Wall Mount
Mounting Type	‎Wall Mount
Number of Items	‎1
Operating Voltage	120 Volts
Operating Voltage	‎120 Volts
Operation Mode	ON-OFF
Operation Mode	‎ON-OFF
Part Number	‎26933
Product Dimensions	‎1.5 x 1.5 x 3 inches
Size	‎Dimmer
Style	‎Motion Dimmer
Switch Style	Motion Dimmer
Switch Style	‎Motion Dimmer
Terminal	Spdt
Terminal	‎Spdt
Unit Count	‎1.0 Count
Upper Temperature Rating	‎40 Degrees Celsius
Warranty Description	‎2-Year Limited Warranty
Wattage	‎600 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Corey

Works well, a bit pricey

The product itself works great. I am using one for my guest bathroom and laundry room. I think the price is a bit high for what you get but there are not a lot of comparable zwave in wall switch/motion sensors. Having the motion sensor built into the switch eliminates the need for a battery or usb cable. Of course, your switch has to be located such that the field of view will detect the traffic like you want. I did have a slight issue getting the switch plate to fit over the switch. The buttons wouldn’t move freely. I just used some sandpaper to make the opening slightly larger and I was in good shape.

Scritto da: Scott Reston

Great switch for half-bath, good Home Assistant support

Installed this in my half-bath and have it connected to Home Assistant via Zwave-JS. It's working great so far. You can configure the light to stay on up to 30 minutes after motion. The motion sensor in Home Assistant reports "OFF" in about 25 seconds. I put a contact sensor on the bathroom door and set up a template sensor that's "on" when there's motion from the switch sensor or the door is closed. I have Home Assistant turn off the light when that sensor goes "off". So in practice, if you close the door, the light will stay on for you whether you move around enough to keep the motion sensor happy. But if the door is open, the light'll turn off after about 25 seconds with no motion. This works great for us as you can see the reflection of the bath light on our living room TV.

Scritto da: RAF

Got to know what you are doing :)

I have about a dozen of these in my new home and they are working great. But unlike more most reviewers I use Hubitat and not Wink or Smartthings. Hubitat allows controlling the advance features of this device and also does not use an internet connection to a remote Wink or Smartthings server. I have my switches setup in "Automatic" mode and when the light turns on Hubitat switches the mode to manual. This allows me to control the switch in a more sophisticated way. For example, in our master bathroom with the switch in automatic mode you walk into the room and the lights turn on immediately. But leaving the switch in automatic mode is a problem when we go into our walk in shower and are out of view, after X number of minutes the lights would turn off. The solution was to put a motion sensor in the shower (it has a high ceiling and stays dry). By creating a Hubitat rule and switching the dimmer to manual mode once the lights are turned on and using motion seen by either motion sensor, the shower or GE dimmer, Hubitat keeps the lights on in the bathroom. The shower motion sensor has another rule to turn on the shower lights and fan (another GE Z-Wave Switch).. The combination of Automatic and Manual modes and the Hubitat controller has been a very useful technique in automating my home lighting. Hubitat also controls the dimmer settings used throughout the day and night and I've seen no issues. It's nice to walk into the bathroom late at night or early morning and now be blinded with very bright lights!

Scritto da: Pierce Thomas

Works well, would recomend if a motion switch is needed.

I recently took the leap into starting my smart home. I purchased a few switches and thought I would leave a review that other might find helpful as a first-time setup. Below are a few details about my current configuration with the GE 26933 Motion Switch. Setup: I am using 4 of the Cree 9.5W Dimmable LEDs Cree 65W Equivalent Soft White (2700K) 9.5W BR30 9W Dimmable LED Flood Light Bulb (4-Pack) For a total load of about 47.5w on the switch. One note about the bulbs (not necessarily about the switch) is the fact that there is a slight buzzing noise, but only while in a dimmed state. PRO: • Smooth Dimming • Silent operation (no noise turning on or off) • 4x configurable associations • Motion sensing • Never worry about turn off (if you have the motion sensing activated, you never have to worry about shutting the switch off.) CONS: • Very large body (This switch takes up a lot of space in the junction box, make sure you have enough room) • No settable minimum brightness (some of the Lutron switches have a configurable minimum for LEDs) • Minimum brightness is not the same as other GE Z-Wave switches such as the GE 14294. Minimum on the GE 26933 is roughly what 30% would be on the GE 14294. The GE 14294 will go completely dark if dimmed all the way and will appear “off”. • If the switch is turned on by motion, it never appears to turn off in the Hub. It is as if the switch “dims” to 0% (not a big deal, but it does show the Hub that it is on) • I had difficulties trying to change the motion settings using the buttons as the manual describes. • No supplied cover. The Lutron screw less cover “White” matches the switch perfectly.Lutron Claro Single-gang Wallplate - Parent All in all I do really enjoy this switch, there are a few quarks to get around, but the motion sensing works very well. I have this switch installed next to stairs and it lets me know when someone is coming up. It has an automatic time out that is “configurable”, but I have yet to get it to change from the default of 5min. The color of this switch and other