eSenlite Rörelsesensor Ljusockel, Radar Motion E26 Skruv LED CFL Glödlampsadapter, Dusk to Dawn Dimbar kontroll (1)

Brand:eSenlite

2.9/5

60.52

eSenlite radarrörelsesensor aktiverad eftermontering av ljussocklar Installera helt enkelt i en befintlig ljussockel och skruva sedan in glödlampan i armaturen. Gör ditt liv en kull enklare.Specifikationer: Drifteffekt: 90-230VAC/50/60Hz Driftseffektbelastning: 70W(max)Byggad på LED-ljusbelastning: 1W/80LMRadar HRF: 5,8GHz, ISM-band Detekteringsvinkel: 360D bred) täckning (justerbar) Fördröjningstid: 5sek/1min/3min/8minInstallationsstorlek: Diameter-2,5(Max); Höjd-2.25(Installerad) Monteringsmetod: tak, vägg och stativ; Vertikal eller horisontell Driftstemperatur: 5F till 158F (-5 till +70C) Driftsmetod: Smart (standard) eller AutoFeature och funktion:- Inbyggd Doppler/Mikrovågs SMART-sensor: penetrera fysiska barriärer, övervinna temperaturförändringar, ingen rörelseavkänningsfördröjning- Innovativ belysning utan rörelseavkännande fördröjningslägen med extremt låg strömförbrukning: SMART-månskensläge (fast 1W/80 Lumen) eller traditionellt automatiskt påslagsläge (Gör ditt eget val!) - Utrustad med fotocellssensorer för äkta belysning från Skymning till Dawn hela natten - Lätt att göra-det-själv: behåll din befintliga snygga armatur med extra användarvänliga belysningsprofiler och SMART-sparfunktion. Detta är 1-enhetspaket.*OBS: Kontrollera storleken och se till att du har tillräckligt med utrymme i din lampa eller installationsområde för att använda glödlampan med uttagen. *Radarsensor kan upptäcka rörelse genom glas och vägg så justera detektionsområdet baserat på faktisk prestanda. Kontakta oss om du har några frågor före eller under installationen.

EAN: 0856071006409

Kategorier Verkyg & hemförbättring, Ljuslampor, LED-glödlampor,

💡TVÅÅRS BEGRÄNSAD GARANTI: Av amerikansk uppfinning, produkt skapad och designad, QC's. 100% kundnöjdhet är vårt mål. Om du har några frågor är du välkommen att kontakta oss. Vi hjälper mer än gärna till. 💡 ENKEL DIY OCH ENERGIBESPARANDE: en enkel plug-and-play kommer att förbättra din befintliga snygga armatur/standardbelysningssockel/bord, golvlampa med användarvänliga belysningsprofiler och SMARTA sparfunktioner. Spara energiförbrukningen med upp till 98 % utan att byta ut befintliga armaturer, förbli till och med original glödlampa med fin färgindex. Kan förlängas glödlampans livscykler upp till 2-3 gånger!. 💡BEKVÄMLIGHET OCH FLEXIBILITET: med fotocellsensorer för äkta Dusk to Dawn-belysning, kommer ljuset automatiskt att tändas eller fungera under natten eller i mörker; radarrörelsesensorn kan penetrera de flesta fysiska barriärer (glas, trä, plast och till och med metallskärm); justerbar rörelsekänslighet och detektionsområde (upp till 26Ft/360-graders täckning). 💡INNOVATIV TEKNIK MED VALBARA LJUSPROFILER: SMART-MOONLIGHT-läge rekommenderas starkt på grund av dess extremt låga energiförbrukningsfördel (1W/100 lumen under fast nedtonad profil när ingen rörelse detekteras) och unika mjuka glödljusstyrka, vilket skapar en grannvänlig och ljusföroreningsfri atmosfär under natten. AUTO-läget erbjuder traditionell rörelseavkännande funktion och justerbar fördröjningstid är tillgänglig. Gör ditt eget val!. 💡Kompatibel med de flesta befintliga E26- eller E27-glödlampor: uppgradera ditt befintliga snygga eller anpassade ljus med radarrörelseavkännande ljusuttag för de flesta inomhus- och utomhusarmaturer (utan att bytas ut) såsom vägg-, tak-, bords-, golv- och dekorationsarmaturer etc.
Assembled Height ‎3 inches
Assembled Length ‎5 inches
Assembled Width ‎3 inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand eSenlite
Brand ‎eSenlite
Color White
Color ‎White
Control Method ‎App
Country of Origin China
Country of Origin ‎China
Customer Reviews 3.9 3.9 out of 5 stars 719 ratings 3.9 out of 5 stars
Finish Type ‎Polished
Finish types ‎Polished
Included Components ‎Light Sockets
Indoor/Outdoor Usage ‎Outdoor, Indoor
Is Discontinued By Manufacturer No
Is Discontinued By Manufacturer ‎No
Item model number EE101WLS-1
Item model number ‎EE101WLS-1
Item Package Quantity ‎1
Item Weight ‎3.84 ounces
Light fixture form Wall
Light fixture form ‎Wall
Light Source Type ‎LED
Luminous Flux ‎100 Lumen
Manufacturer E E Systems Group, Inc.
Manufacturer ‎E E Systems Group, Inc.
Material Plastic
Material ‎Plastic
Number of Light Sources ‎1
Part Number ‎EE101WLS-1
Power Source ‎AC/DC
Product Dimensions 5 x 3 x 3 inches; 3.84 Ounces
Product Dimensions ‎5 x 3 x 3 inches
Product Dimensions ‎5"L x 3"W x 3"H
Shade Color ‎White
Shade Material ‎Glass
Special Feature ‎Dimmable, Motion Sensor
Special Features ‎Dimmable, Motion Sensor
Style Contemporary Lighting
Style ‎Contemporary Lighting
Switch Installation Type ‎Ceiling Mount,Wall Mount
Voltage ‎120 Volts
Wattage ‎1 watts
Wattage ‎70 Watts

2.9

13 Review
5 Star
53
4 Star
16
3 Star
10
2 Star
7
1 Star
15

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: R. Feinberg
Turns A Regular Light Into A Motion Sensor Light - Scare Burglars And Animals Away!
This thing is so cool! I have a light on my backyard patio that I wanted to scare off anybody walking back there and I especially wanted to scare off deer and rabbits that were eating my plants at night! This is it! I just set the few little settings on it for how long I wanted the light to stay on when it sensed motion, at what distance I wanted it to sense motion and whether I wanted a dim light ("Moonlight" which is the gray ring around it in the picture) on all night and have the lightbulb come on when it sensed motion or NOT have the dim Moonlight feature on al night and just have the lightbulb come on when motion was sensed. Then screwed the eSenlite into the socket, then a lightbulb into the top of the eSenlite and turned the wall switch on (see pic) and everything was all set! What a great little invention! I hope they apply for a patent for it! It's genius! I love it and it was just what I was looking for and more than I was hoping for! Quality product + excellent customer service + speedy delivery = I couldn't be happier!!
Scritto da: Jose Santaella Velez
The suggested default settings did not work for me.
Please don't get me wrong; I acquired one; when the default settings did not work, I did ask to exchange it, nevertheless the replacement from Amazon did the same thing so I test one by one manual settings until I found one that worked for me. Even when manufacture said the case where the light will not affect the motion sensor it seems do. Now I have two of them working. It may take a bit of (Frustrating) time to find the correct setting wonder if Amazon consider providing more Info or a bit more time.
Scritto da: Gerald
Great Feature Promises, But, Falters on Delivery for me.
The good first. The unit seems well made, has a decent feel in the hands, and looks reasonably attractive, fitting in to my garage ceiling setting quite naturally. Having screwed it in and out an interminable number of times during my testing to make adjustments, there was never any feeling of fragility, looseness, or of wearing out. Lastly, when ambient lighting from the nearby window or open garage door reaches a sufficient level, the unit faithfully switches from Moonlight to off. I really liked the idea of this Motion Sensor Activated Light Socket. What I got is far from ideal, as there appears to be some circuit crossover/crosstalk, deep within its logic center, perhaps coming from poor execution of design or manufacture. Let me explain with the outcome of hours of testing with a 13W Bright White LED Bulb as ambient lighting for a walkway/ramp in our garage. Please Note: If my experience is related to a quality/inconsistency issue, YMMV!!! The unit's has 5 configuration switches near its base (S1S2-S3S4-S5), and are presently set as: 00-01-1. This should provide: 5 seconds of "on" time, up to 19 foot detection range, using SMART mode. It actually provides: ~15 minutes of "on" time (once as low as ~5 minutes), at least 14 feet of range, and in SMART mode. I want 60 seconds of "on" time (AKA 01-01-1) with each detection, but I can't get it with S4 at "1". Any time the S4 switch is in the "1" position, the clock circuit loses it mind, and opens the extended and sometimes random 'box of time chocolates'. With S4 in the "0" position, "00"(S1 & S2) consistently gives ~5 seconds as specified on the instruction sheet, but flip S4 to "1", and all hope of following the spec is lost. Unfortunately, S3S4 as "10" does not provide the required range needed for comfort/safety. Actually, this range setting fell short, as standing at 10-12 feet at one location waving my hands, had no effect, while with the same setting in another location at 14 feet, I was easily detected. Thus, the coverage seems to be lobed versus a circular pattern. On the other hand, S5 always gives either the "AUTO/0" mode, or the "SMART/1" mode, without regards to S4's position. I started out planning to only use "AUTO", but I've come to like the "SMART" mode, because when it is very dark you have a little light to let the person (just out of range) know a light is there. I was going to return the unit the next day after completing this testing, but I'm keeping it. The 19 foot range setting covers the two doors I need it too (actually seeing through the glass door when its solid inner door is opened), and the looonnggish "on" time per detection is better than the target light being on 14 hours straight each day. So, it "is", better than nothing! It's hard to imagine buying another unless I can use the shorter ranges, but it is about half the price of adding control of this light to my home automation system (with which I'd have accurate "on" times and consistency 24/7/365. HhMmm!)
Scritto da: Claybourne Hart
Program
You need to do a quick adjustment on the pins. After that it's perfect ????????
Scritto da: Duchess of Toad Manor
Long lastings
I bought two of these for our vacation home about 5 years ago. They are still working great. Would recommend as a workable substitute if you don't want to go to the expense of buying complete fixtures.
Scritto da: Marc
Awesome!
I had a light switch with motion detection built in, but you had to be almost right in front of it to pickup motion. I swapped out to the bulb with this socket and it works way better. I have this setup in the hallway steps to the basement and it properly picks up when you are at the top or the bottom of the stairs. It's the little things like this that had me saying out loud, "that is pretty cool". And no more waving my arms around like a crazy person trying to get the old wall sensor to pick me up.
Scritto da: Jh
Doesn't want to turn off
Bought this for attaching led lights to it, as my previous one wouldn't work with them. No problem on install or activation using the control switches. Only issue is that it doesn't want to turn off. It's in a basement, so only movement is when we are in area. It just doesn't turn off. Even after 24+hrs.
Scritto da: Amazon Customer
Works great
Fits well and definitely responsive to movement. I just have the wrong fixture but a great product.
Scritto da: Stephen Sagar
Works well as expected
This installs easily and the dip switches are easy to set to set sensitivity of motion and how long it stays on. Using an LED bulb in the socket — the built in dim light is a great asset. Motion switches on your installed bright bulb. I did have some issues with the bright light staying continuously on after having it for 6 months. It has a 2 yr warranty and the company responded to email and replaced it straightaway. This really gives confidence in this company. Highly recommended as an outside porch light, but many other uses. The radar detection more effective than infrared, working through the glass enclosure.
Scritto da: Amazon Customer
Reliability is not always 100%
I ordered a 2-pack of eSenlites and only 1 of the eSenlites is performing correctly per the illustrated setting instructions. I will see how well they perform over time.
Scritto da: Amazon Customer
Works through frosted glass!
We were doubtful that this would work through our new white frosted glass fixtures but it is working well!
Scritto da: Troybay
Good Value
The 2-pack makes it a good value. Radar detection more accurate than PIR detection units that I purchased in the past. Dip switches allows flexible customizations. I'm using one in a hallway, and the other outside to light up the driveway.
Scritto da: Denis
Très bien
Pour mon garage

Relaterade produkter

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array