Halo H750ICAT, 6 LED-hus, IC Air-Tite, för listade Halo LED-moduler vardera

Name: Halo H750ICAT, 6 LED-hus, IC Air-Tite, för listade Halo LED-moduler vardera
Brand: ‎HALO
SKU: 0623961055430
Price: 75.25 EUR
Availability: InStock

Brand:‎HALO

3.4/5

€
75.25

PRODUKTBESKRIVNING Halo-infällt hölje, 120 V, LED-lampa, 15 W-lampa, lufttät IC-isolering, Lämplig för användning med: ML706830 LED-modul och 494WB06 eller 493WBS06 Trim, 6 i diameter, 8-21/64 i total höjd, 11 tum Total bredd, 4-1/2 i totalt djup, aluminium, CSA-certifierad, UL-listad, för allmänbelysning. . FRÅN TILLVERKAREN H750ICAT är ett dedikerat LED-nybyggnadshölje som ska användas med HALO H7 Collection LED-moduler. H750ICAT är designad för isolerade tak och kan vara i direkt kontakt med takisolering. Denna design av AirTite-hus förhindrar luftflöde mellan vinden och vardagsrummet och sparar både uppvärmnings- och luftkonditioneringskostnader. H750ICAT-anslutningssystemet ger kodkompatibilitet med hög effektivitet när det används med HALO H7 Collection LED-moduler.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0623961055430

Kategorier Verkyg & hemförbättring, Elektrisk, Recessed Lighting, Hus,

Nybyggd infälld burk, perfekt för dig som har lätt tillgång till sina tak. Hög effektivitet när den används med utsedda Halo-lister och moduler. Kompatibel med Halo SLD-, RA- och RL 56-seriens LED-retrofits. Våtklassad, kan användas med utvalda duschljus.

Are Batteries Included	‎No
Batteries Included?	‎No
Batteries Required?	‎No
Brand	‎HALO
Certification	‎No
Color	Silver
Color	‎Silver
Customer Reviews	4.4 4.4 out of 5 stars 114 ratings 4.4 out of 5 stars
Finish	‎Aluminum
Finish Type	Aluminum
Finish Type	‎Aluminum
Included Components	‎Electrical & Heating;Cord & Power Management;electrical-cables
Installation Method	‎Recessed
Is Discontinued By Manufacturer	‎No
Item model number	‎H750ICAT
Item Package Quantity	‎1
Item Weight	‎1 Pounds
Light Source Type	Light Emitting Diode
Light Source Type	‎Light Emitting Diode
Manufacturer	‎EATON
Material	Aluminum
Material	‎Aluminum
Part Number	‎H750ICAT
Power Source	No
Power Source	‎No
Product Dimensions	‎8.33 x 11 x 4.5 inches
Product Dimensions	‎8.33"L x 11"W x 4.5"H
Size	‎Each
Warranty Description	‎2 year warranty.
Wattage	‎15 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Kurt

Works great

Pretty easy to install if you have access to the attic. Works great, did the trick.

Scritto da: J. Michas

Huge difference from old non ICAT cans

I replaced 7 non ICAT cans that were in a second story room over a room that is over a 3 car garage. Both the upstairs and downstairs rooms were always freezing cold. I knew the old lights were an issue because when in the attic you could literally see into the house through the slots in the light housing. It was not a fun job, some of the lights were in tight spots but these lights have push connectors so it made connections quick. After hammering the lights in place I was able to spray foam around the perimeter to create an airtight seal between the housing and sheetrock. Later that night I went in the upstairs room, which usually feels like a meat locker, and it was very comfortable. The housing insides were probably around 35 degrees but no air was dropping out of them. Those rooms are much more comfortable now. Should have done this a long time ago.

Scritto da: Joe

I would like to give these 5 stars

I would like to give these 5 stars. However, the last 2 I bought, 1 was bent so bad I needed to spend 5 minutes slowly bending the arms back so it was usable. The other one had one of the extensions broke on the perforation already (so it wasn't usable). If they come as they should the cans are easy to hang and work with, and I would definitely recommend them. My floor joists are varying distances apart, so I have had to adjust the arms on these cans and they have worked great. I have currently put up 20 of them and have 6 more to go.

Scritto da: Eric

Exactly what I was looking for.

This housing does not contain the classic Edison screw in light bulb socket. This housing is made strictly for LED lights. The materials state you have to use the Cooper Lighting LED Module but that is extremely expensive. I used a similar light to this http://amzn.com/B00JUNY2D4 just lower wattage. You can also see the orange connector between the light and the socket. This housing is just like the standard Halo 6 inch New Construction Recessed Light housing sold at every home improvement store with the exception of the lower max wattage. This allowed me to put more lights on fewer circuits. Had I used the classic housings I would have had to use the higher wattage in my calculations. Two attached photos of the inside. You can see the 20 watt max label and the connector. I am extremely happy with these. I ended up purchasing 18 of these and wouldn't hesitate to purchase more.

Scritto da: Austin

Doesn’t have all the parts

I opened a few months late and found the parts are missing. Can’t return it now and money wasted!!

Scritto da: Austin Golankiewicz

Great quality, great price

Easy to install can’t beat the price

Scritto da: Trey

Very nice product just missing part...

Very nice sturdy product my husband had no problem installing. I gave it 4 stars because one of the box covers was missing (we ordered 2 lights). I tried calling the seller multiple times with no answer. But over all we are happy with the product.

Scritto da: Tim C.

Great Deal

For years I wanted to have an additional light in our kitchen. This installed easily. Since it was going in an existing ceiling I screwed the supports in instead of nailing them. Installation took less than an hour including running the wire from another light. They make the wiring very easy and quick. I plan on buying more. My wife has already given me a list of where she wants additional lighting. I also like the ability to use the screw-in LED bulbs.