HeatnBond UltraHold Iron-On Adhesive, 17 tum x 1 Yard

Name: HeatnBond UltraHold Iron-On Adhesive, 17 tum x 1 Yard
Brand: HeatnBond
SKU: 000943035022
Price: 25.77 EUR
Availability: InStock

Brand:HeatnBond

3.6/5

€
25.77

HeatnBond Ultrahold är en pappersrulle med baksida, påstrykning, No Sew, dubbelsidigt klister för att limma tyg utan att behöva nåla. Ultraholds bindning utan sy är starkare än traditionella smältbara vävar. Det solida arklimmet innebär kant till kant täckning för applikationsformer på täcken, väggbonader och klädsel utan att rynka eller klumpa sig. Rita eller skriv ut direkt på pappersbaksidan för att enkelt designa applikationsbitar!

Belopp

Lägg till i kundvagn Köp nu

EAN: 000943035022

Kategorier Hem & kök,

Ingen sömnad behövs eller används. För användning på tyg, men kan användas med ett brett utbud av material som folie, lama, filt, mocka, kartong, läder och trä. Solid arklim på pappersbaksida ger kant till kant täckning utan att ryckas eller hopar sig. Värme aktiverad; Permanent; Dubbelsidigt lim. Ultraholds bindning utan sy är starkare än traditionella smältbara vävar.

Brand	HeatnBond
Color	White
Compatible Material	Wood, Cardboard, Paper, Leather
Country of Origin	USA
Customer Reviews	4.5 4.5 out of 5 stars 5,100 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer	No
Item Form	Precuts
Item model number	3502
Item Package Quantity	1
Item Weight	0.32 ounces
Manufacturer	Therm O Web
Material	Adhesive
Package Information	Package
Product Dimensions	0.38 x 3.75 x 11.13 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Amazon Customer

Great for Girl Scout badges/patches

My daughter and some of her Girl Scout sisters recently started doing more of the retired badges and they are not iron on. I purchased this to add to the back to make them iron on and it has worked great. Personally, I cut the material to fit just inside the badge and used a heat press to warm it. Then used the heat press to apply it like I do the regular ones. None have fallen off

Scritto da: Amazon Customer

Works as expected.

Works great. Adhesion worked perfectly after ironing.

Scritto da: Delayney white

Nice product good price

Works great

Scritto da: Amazon Customer

Incredible value and an awesome product for iron-on patches

I've used this for both patches that I've bought without realizing they were sew-on, as well as on patches that I re-heated with an iron to remove and relocate (Usually when doing this, the iron-on adhesive still works, but sometimes it doesn't!). Anyway, I bought this stuff on a whim. I can't believe how well it worked, or much you get for a mere three bucks. Amazing! In these photos: 'I was a Teenage Werewolf' was a patch that had no iron-on backing. 'Sorry We're Dead' was a patch that I moved to a different area of the jacket, and most of the original adhesive stayed in the old spot because I didn't heat it up enough before peeling it off. Amazon is asking me to give specific stars for 'Thickness' and 'Stretch'. Don't seem relevant... Not sure why, but... This stuff isn't thick, but I don't see why it would need to be. It has plenty of adhesion for my uses. Stretch? Not sure of intent of the semantics here. It doesn't physically stretch.... That said, there is so much here though that I can certainly stretch it's use. It's super-easy to use: 1. Using scissors, cut out an area slightly larger than the patch (or what you're trying to bond). 2. Place your patch on the ironing board face down. The HeatnBond sheet has a paper liner on one side. Put the glossy side of the HeatnBond you cut out on the backside of the patch that's facing you, The paper side of the HeatnBond should be facing up, towards you... Iron it to seal it to seal the shiny side to the backside of the patch. 3. After it cools, use the scissors to trim the edges of the HeatnBond that extends beyond the edges of your patch, so that it's the same size as your patch. Peel off the paper so the adhesive is exposed. 4. Flip the patch over and place it on where you'd like it to be. Iron it 5. Let it cool before moving the jacket (or whatever it is you're working on). You're done. Roughly a 5-10 minute process. Easy Peazy. 6. After it cools, and the jacket (or whatever) has moved around a bit, you 'may' need to hit the patch with an iron again. That's not a fault of this product. That's pretty much standard practice with iron-on patches. You often need to hit patches with an iron 2-3 times between the first 2-3 times you wear the clothing until they are really bonded. To summarize this short novel: Great stuff... an absolute steal at $3!

Scritto da: Blanca Arroyo

When you wash it comes off

I like it but when I wash the clothes the patch comes off, I iron it again and stiks even when I use cold water.

Scritto da: Meagan

Worked fine

I had some patches without adhesive that i wanted to iron on. It was easy to get this product to stick to the patch.. But trying to get it to stick to the fabric (in my case a cotton jacket) was a little tedious. After some patience tho it finally adhered! (Probably would have been easier on a thinner fabric.) They seem to be on there well, even used it to reapply old patches that weren't sticking anymore

Scritto da: Jamie B

Not sticky enough, and then too much!

Used these to iron some used patches from our daughter's old Girl Scout vest onto her new one. First of all, you get a LOT of iron-on paper, so if you need a lot, this may be for you. But if you only need a little bit, look elsewhere. Second, the directions are worded a little funny, but basically you iron onto the paper just for twos seconds, then let it cool, then two seconds, then let it cool, and continue until the paper lifts off okay....that can be tricky cause it doesn't adhere evenly across the paper. Then you put whatever you're ironing on and go for 8 seconds at a time. This is where it got really hairy. The patches slowly started to slide, and the iron-on glue them started adhering straight into the iron, then it was stringy gluey everywhere. If you have this product and are going to use it, cut it a bit smaller than the shape because it will ooze out a bit as it heats. Also, maybe pin the shape over the iron-on glue to the fabric before you start ironing so they don't slide. (Watch out, those pins will get hot so let them cool before you remove them). None of these tips were in the instructions, so don't end up with a glue-y iron like I did. And lota of extra iron-on that I'm not going to use...

Scritto da: magicjake7

Took multiple attempts

I used this for a halloween costume. It took multiple attempts to finally get it to adhere without a corner peeling off. Once it did adhere it last throughout the uses of the costume.

Scritto da: Peter Hillar

works like a charm

Now my name tag will stay put.

Scritto da: Charlotte

Perfect For Making Embroidery Patches!

I wasn't sure the best adhesive to attach felt to an embroidery patch that I'd made. I did a bit of research and this looked like the best option. The instructions were easy to follow, worked perfectly with an iron and left a really professional finish! The value for money is good if using for a relatively small area, like small iron-on embroidery patches.

Scritto da: Amazon Customer

great item and easy to use. no issues of package.

excellent product, no problems.

Scritto da: Janelle

Love this product

Use this for binding leather or fabric before I cut on my circuit air, and I love the quality and how much easier it makes for my machine to cut. I also have used it to hem curtains. Easy to use and so simple