Highcraft PXBND12-10 PEX böjstöd 1/2 tum, väggmonterad slangrörhängare 90 grader med spikplatta, polyeten (10 pack), svart 1/2 tum.

Name: Highcraft PXBND12-10 PEX böjstöd 1/2 tum, väggmonterad slangrörhängare 90 grader med spikplatta, polyeten (10 pack), svart 1/2 tum.
Brand: Highcraft
SKU: 0804595354797
Price: 45.15 EUR
Availability: InStock

Brand:Highcraft

3.5/5

€
45.15

✔PEX-REVOLUTIONEN: PEX är det föredragna valet för vattenförsörjning och hydronisk uppvärmning, med minskad kostnad, snabbare installation, flexibilitet, hållbarhet, frysbeständighet och korrosionsbeständighet! !. ✔MÅTT: 5 tum lång, passar 1/2 tum PEX-rör, med spikplatta med 2 förborrade hål (spik ingår ej). ✔SLÄT PLASTKONSTRUKTION: Reducerar buller, vibrationer, veck, överböjning och vattenflödesbegränsning. ✔ ENKEL INSTALLATION: Sänk arbetskostnaderna avsevärt med detta högpresterande PEX-vinkelstöd. Inga verktyg, lödning eller pressning krävs. Spika bara fast monteringsplattan på ytan (förborrade hål för extra bekvämlighet) och klicka på PEX-slangen i beslaget. Så enkelt är det! Kan tas bort och återanvändas flera gånger. ✔ ULTRA SECURE FIT PEX HÄNGARE: Ger ett styvt 90° böjstöd för PEX-slangar som löper bredvid vägg eller balk.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0804595354797

Kategorier Verkyg & hemförbättring, Rough Plumbing, Rör, Rördelar & Tillbehör, Rörstöd,

Batteries Required?	‎No
Color	‎Black
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 278 ratings 4.5 out of 5 stars
Item model number	‎PXBND12-10
Item Package Quantity	‎1
Item Weight	‎6.7 ounces
Manufacturer	‎Highcraft
Part Number	‎PXBND12-10
Product Dimensions	‎5 x 0.5 x 0.5 inches
Size	‎1/2 in.

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Xerocool

perfect

no fails or issues. works as it should

Scritto da: Stephen P. Berzins

Not as pictured. What I received was like most of the her ones, attachment inside the bend.

Worked fine, but ordered this 10 pack instead of just two I needed only because I wanted the different attachment point, on top, not under the the bend. But, in the end they worked just fine

Scritto da: DustStorm

3/4 inch PEX is very, very, very, very, very, very, very hard to bend 90 degrees!

Obviously, most important part of using these supports is to be able to bend the PEX piping. It seems that everyone who deals with PEX espouses the virtues of its flexibility, which of course is true. But, working by myself, I found the reality of bending ¾” PEX to a 90° angle virtually impossible. I gave up, found that I could make due with less sharp turns. (I give 5 stars because I couldn’t use the supports! Returned.)

Scritto da: Bugs

Considering how easy this break, you may want to be sure you order some extras

Maybe its that were a little bit stronger than they are, but it did surprise me when the second one snapped. Get extras so you’re not stuck without finishing your work.

Scritto da: Michael Maddux

These are needed

These work well for molding pex into a turn. The pex is flexible but it has a memory and try to return to its original shape. These hold it into shape even if you need to make a turn without needing to secure it.

Scritto da: WilliamB

Good if you add a little heat and aren't rough.

Broke the first one trying to make a bend on pex at about 68F. I used a heat gun to gently warm the pex and was able to get 4 on without much issue. It was critical to hold the pipe at the 90° angle until it cooled a little or it would extend to around 110°. Not bad, but not at strong as the metal ones from sharkbite. The mounting holes worked well.

Scritto da: PigPen4x4

Not rigid...

Whether these are good or not depends on your expectations. I needed a pretty tight bend and the metal style would hold this very well. These being plastic, have some give so the bend is more like 75-80 degrees (I dunno, didn't measure) rather than 90. Many places these will be OK, others not so much.

Scritto da: Wayne Richardson

Weak plastics

I purchased 1 pack of 10 and started to install them. The first two installed properly, the next two snapped when I was trying to insert the pipe. These plastic supports don't give much support, and snap too easily. I will not purchase again.

Scritto da: Robert Marin

Light and snap well

I had a few break on me

Scritto da: KM Purcell

They seem to make a bit too small of a circle. But I am sure it will work fine.

It is very sharp on the edges. I have to learn how to use properly. It can mark up or scratch the pex very easily. But I have never used this type. So, I'm a newbie..