Magma Ersättnings Piezo-tändare med tråd, elektrod och skruv för Marine Kettle 2 Gas- och Gourmet-grillar

Name: Magma Ersättnings Piezo-tändare med tråd, elektrod och skruv för Marine Kettle 2 Gas- och Gourmet-grillar
Brand: ‎MAGMA
SKU: 4202250042922
Price: 55.62 EUR
Availability: InStock

Brand:‎MAGMA

3.4/5

€
55.62

Beskrivning Renogy Wanderer-Li är en 30A PWM solar laddningskontroller som integrerar effektiv PWM laddning för att öka batteritiden och förbättra systemets prestanda. Designad med ett enkelt gränssnitt för enkel användning, använder styrenheten flera LED-indikatorer för att meddela användare om laddningsstatus och batteriinformation. Denna nyligen förbättrade modell har två avancerade funktioner: en RS232-port och litiumbatteriladdning. Med tillägget av RS232-porten kan användare nu ansluta och kommunicera med Renogy BT-1 Bluetooth-modulen. Genom att lägga till BT-1 till Wanderer-Li kan du nu använda smartphone-appen, DC Home, för att övervaka och justera ditt solsystem på distans. Med införandet av litiumbatteriläget kan 30A-kontrollern med negativ jord nu ladda olika 12V batterityper och banker, inklusive de flesta 12V litiummodeller som finns på marknaden. Installationsnoteringar: Standardstartpositionen för Wanderer-styrenhetens terminalluckor är stängda (i UPP-läge) som av misstag kan se ut som en öppen trådlucka. Se till att FÖRST sänka varje terminallucka genom att skruva terminalerna moturs för att exponera trådterminalluckan till öppet läge. Fäst sedan varje kabel genom att vrida skruvarna medurs till stängt läge. Enkel installation: Öppna luckan helt (CCW), sätt i lämpliga kablar och stäng luckan helt (CW). Om du har några frågor angående denna produkt, vänligen ring oss på 1 (909) 287-7111 eller maila support@renogy.com . Nyckelfunktioner Optimerad för ett 12V-system; Deep cycle Sealed, Gel, Flooded och Lithium batterialternativ redo. Smart 4-stegs PWM-laddning (Bulk, Boost, Float och Equalization) och temperaturkompensation ökar batteritiden och förbättrar systemets prestanda. Intelligent skydd mot omvänd polaritet, överladdning, kortslutning och omvänd ström. Flera LED-indikatorer för lättavläst laddningsstatus och batteriinformation. Integrerad RS232-port tillåter kommunikation med BT-1 Bluetooth-modul och användning av DC Home-app för smartphone. Paketet innehåller Renogy Wanderer Li 30A PWM Charge Controller 1 x

Inga enheter tillgängliga

EAN: 4202250042922

Kategorier Uteplats, gräsmatta & trädgård, Grillar och matlagning utomhus, Reservdelar för utomhusmatlagning Reservdelar för matlagning, Grilltändare,

Designad för grillar i Marine Kettle 2 och Gourmet Series. Inkluderar tråd, elektrod och skruv. Garanterar pålitlig tryckknappsbelysning. Ersättnings piezotändare för utvalda Magma grillar.

Brand Name	‎MAGMA
Color	‎One
Customer Reviews	4.4 4.4 out of 5 stars 140 ratings 4.4 out of 5 stars
Included Components	‎Piezo Lighter
Item Dimensions LxWxH	‎7.09 x 5.12 x 1.97 inches
Item Package Dimensions L x W x H	‎4.69 x 3.74 x 1.06 inches
Item Weight	‎40.82 Grams
Manufacturer	‎Magma Products
Material	‎Other
Model Name	‎Magma Products
Number of Items	‎1
Package Weight	‎0.06 Kilograms
Part Number	‎10-960
Sport Type	‎Boating
Suggested Users	‎unisex-adult
Warranty Description	‎Manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Kimberly S.

Worked perfectly

Shipped fast and worked perfectly. The grill is back up and running.

Scritto da: Cary Alburn

A simple, effective lighter—that is very difficult to install

I’ve had my Magma Kettle 2 for many years—it’s a great little BBQ. But when its lighter stopped working this past September, I discovered how hard it is to light without it, whether with matches or a separate lighter. So I wanted to replace its lighter. It came very quickly—but without instructions, and my Kettle’s instructions had gotten wet so that they were unreadable. I was able to figure it out, but it is a chore and a half to replace the lighter. That’s the reason for the 3 star rating. Two pluses: although it’s difficult to install, it fits perfectly, and it works. There have been many changes in the details of the Kettle 2 over the years since I bought mine, but none of those changes have affected the fit. Secondly, when I later contacted Magma to ask if instructions for my particular older model were still available, they immediately emailed a pdf of them. I was able to confirm that my installation without them was correct.

Scritto da: KKid

Remove burner first

It was so difficult to disassemble my magma grill that I returned the replacement igniter and just purchased another magma grill. To replace the igniter you have to remove the burner, which actually holds all the grill components together. Don't buy an igniter until you have successfully removed the burner. It is conceptually simple, but one rusted in place it is very difficult to remove, because it is very difficult to grasp anything sufficiently on the grill to apply enough torque to remove the burner.

Scritto da: Elk

Could be better

I’ve bought three of these in 8 years. First, the electrode lead broke, then the brass nut snapped off and the lead couldn’t be attached. We’ll see what happens next.

Scritto da: Scott D

Works Good with Magna, a little tricky to Install Based on the Magna Mount

I replaced the Igniter on my Magna Grill after three years. The only challenge to install this is that you will have to bend the mounting plate sides to gain access to the back of the nut on the manga grill. Be careful when bending the mounting tabs of stainless steel as you can get cut easily on the grill. Install is simple, gain access to the rear tightening know , lug in the lead, tighten and you are good to Go.

Scritto da: R. Atkins

Fits well and does the job

This is the only solution to replace a burned electrode wire and broken ceramic in a Magma BBQ. Seemed like overkill to have to purchase the spark generator in order to get the ceramic electrode and wire. The package contained two types of electrodes (no doubt for the different models) and the spark generator. The spark generator and electrode for my 'kettle' style BBQ fit properly and work well. Sure wish they used stainless steel for the mounting tab on the electrode because this is what rusted and failed on the old one and eventually caused the wire to fail and the ceramic to crack.

Scritto da: Garnett J.

New design works well

The new design of this Piezo igniter has it’s own grounding probe. No longer does it rely on the burner to be grounded.

Scritto da: Amazon Customer

Great product

Great product, fit my bbq, and works like a champ

Scritto da: Bernie Babineau

Works good

Easy to install

Scritto da: ornella

It was a try but it failed

No good, once fitted did not work wasted time and money

Scritto da: Best of Brit

Doesn’t work, no spark

After spending over two hours installing the electrode I finally installed the piezoelectric button and it didn’t work. I would suggest the this manufacturer has no QA or QC. Basically useless and a waste of time.