0
0

Total:€ 0.00

Se varukorgKolla upp
LoginRegister
0

Total:€ 0.00

Se varukorgKolla upp
LoginRegister

Metabo HPT 36V MultiVolt™ sladdlös bandslipmaskin

Brand:Metabo HPT

3.4/5

€
350.30

Metabo HPT:s 36V MultiVolt sladdlösa borstlösa 3 x 21 bandslipare (modell SB3608DAQ4) är verkligen revolutionerande när det kommer till sladdlös slipprestanda. Både ombyggare, golvinstallatörer, snickare, däckbyggare och gör-det-själv har äntligen en sladdlös bandsliplösning som inte gör dig besviken. Att skära av sladden och ha all rörelsefrihet som en sladdlös bandslipmaskin kommer nu med kraften, funktionerna och dammuppsamlingen som krävande användare förväntar sig. Denna sladdlösa bandslipmaskin är ett vardagsverktyg för träbearbetning på professionell nivå för snabba bättringar eller storskaliga lövträprojekt och allt däremellan. SB3608DAQ4 36V sladdlös 3 x 21 bandslipmaskin är en del av det expanderande MultiVolt-systemet av elverktyg från Metabo HPT. Den accepterar alla MultiVolt-batterier för extrem kraft och drifttid och kan också acceptera den unika nätadaptern (ET36A) för att anslutas under hela dagen, vilket ger ultimat mångsidighet och kraft när du är på farten.

Inga enheter tillgängliga

EAN: 0717709029088

Kategorier Verkyg & hemförbättring, El & handverktyg, Elverktyg, Sanders, Bandslipmaskiner,

SPÅRKNAPP: Låter sandpappersbandet sticka ut 1/16 - 1/8 förbi änden av remskivorna för att bli tätt mot en kant. DAMMINSAMLING VÄNSTER SIDA: Håller dammpåsen eller vakuumslangen ur vägen när du slipar upp mot en kant. IMPONERANDE DAMMINSAMLING: Lätt att fästa dammpåse eller vakuumsvängtillbehör för att hålla arbetsutrymmet rent. LÅS PÅ: Har en dubbelsidig låsknapp för bekvämlighet. BORSTLÖS: För högre effektivitet, ökad körtid och längre verktygslivslängd. INSTÄLLNING AV AUTOLÄGE: Ändrar hastigheten beroende på lastsänkande vibrationer och buller. VARIABEL HASTIGHET: Välj mellan 6 hastighetsinställningar för att matcha slipnivån till applikationen. KOMFORT: Ergonomi och pekpunktsdesign på proffsnivå. KRAFT: All slipkraft hos en modell med sladd. ENDAST VERKTYGSKROPP: Accepterar alla 18V/36V MultiVolt-batterier eller nätadapter - modell ET36A (säljs separat).
Batteries Required? ‎Yes
Brand Metabo HPT
Brand ‎Metabo HPT
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 722 ratings 4.4 out of 5 stars
Grit Number ‎80
Grit Type Medium
Grit Type ‎Medium
Included Components ‎SB3608DAQ4
Item Dimensions LxWxH 12.7 x 5.9 x 7.8 inches
Item Dimensions LxWxH ‎12.7 x 5.9 x 7.8 inches
Item model number ‎SB3608DAQ4
Item Package Quantity ‎1
Item Weight ‎7.7 Pounds
Manufacturer ‎Koki Holdings America, Ltd
Part Number ‎SB3608DAQ4
Power Source Battery Powered
Power Source ‎Battery Powered
Product Dimensions ‎12.7 x 5.9 x 7.8 inches
Style ‎SB3608DAQ4
Voltage 36 Volts
Voltage ‎36 Volts

3.4

13 Review
5 Star
67
4 Star
18
3 Star
6
2 Star
3
1 Star
5

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: Paul F. Kramer
not great, but some decent features.
Let me start with saying I have had a fair amount of experience with Belt sanders. I have used them for over 50 years. I've had quite a few of them so I think I can rate one pretty well. I've had cheap ones and pretty good ones. Recently an old AGM one burned up on me, so, I thought I'd pick up a new one. I don't use them day in day out, (I have a wide belt sander, edge sanders, stationary belt sanders, disc sanders, oscillating spindle sanders, ETC, all to suggest that I have enough experience with sanding to know a bit of what I'm talking about. I have an old makita belt sander too, which is still in good shape, but I needed an extra one for a pretty big project. If this was the only belt sander I would have, I would have bought an old Porter Cable or maybe a new Fesstool, but it isn't. The design is not bad, looks to be durable. The dust collection is certainly better than my AGM was. The platen is "ok" and the old style platen with the graphite seems to be now giving way to the metal with the rubber back. Ok, fair enough. Right out of the box, putting a belt on and using it, I hated it. It doesn't seem very balanced and tends to easily grab and dig in on the belt side, (left). I played with it for awhile and found with a lot more effort and care, I COULD get it to perform marginally satisfactorily. I ALMOST returned it, but the only other option I'd consider was the Makita and that was double the price and I already had an older Makita, (though slightly larger at the 3x24 rather than the 3x21. For a beginnner, this would be a nightmare. 3X21 is a harder size to use, as there isn't much flat stable surface as even a 3x24. A 4x24 would be easier, (but heavier) for a beginner. A lot to using a belt sander is the sanding pattern. Don't just sand in the direction of the grain. At the beginning, on a slab, sand at an angle to the grain, just to flatten the work. Like sanding a floor, you have to go at angles. Once it is flattened, I use a bit lighter paper and work with the grain, but slide the sander at an angle. This sander easily tips, and even bounces. First time I've had such a bouncy sander. It DOES have enough power, adjustability, ease of changing belts, etc. just not very well balanced. You can make it work. Dial down the speed a bit at first. Also don't apply too much pressure on the sander. (always a mistake made by beginners), let the weight of the sander do it's work. Also, if you have an area that seems to need more sanding, don't concentrate much in that area, if it is a dipped area. just sand the whole piece, then look again. If it still needs sanding, you have to sand the whole piece again.
Scritto da: Amazon Customer
Great sander
Lightweight and easy to use. Auto switch is a great feature ????
Scritto da: Dave
Very happy
What a beast. Worked very well on my first project. With the 5 year warranty, I believe I made a good purchase. I wore out my Black & Decker on this same job.
Scritto da: Brad S
New doesn't always mean new
Tool is fine, nothing special. Would be nice to have received a new one as advertised (and paid for) rather than a slightly used, repackaged one with a useless folded belt. New doesn't always mean new.
Scritto da: Pineapple
Not New
The product is awesome. However this is definitely not a new product as advertised. Quite a bit of scratch and appears to be a remanufactured one. Nevertheless it’s still a good product and certainly cheaper than buying new.
Scritto da: NWPaddler
Solid Belt Sander
I have used this sander for 2 days now to sand a deck and it is a solid performer. The sander built sturdy and is heavier than I expected. I have been running it on the highest speed with 40 grit to remove old paint off a deck. There is enough power but I would prefer if it had a little more. The sander is easy to handle with good grips. The design allows you to sand flush into a corner which is a really nice feature. The dust collection is good and requires little extra cleanup. Changing sanding belts is simple and the belt tracking is working well and easy to adjust. One thing to note is that when I took it out of the box it appeared to have been used. There were some scratches in the paint and other marks indicating that a sanding belt had been run for short while. There were also signs of abrasion in the dust collection tube. So I called Amazon to report my find. They apologized and sent out a new sander the next day. To my surprise, the replacement sander had all the same scratches and wear marks. So, I can only assume that Metabo must do some quality check by running the sander for a short time with a belt. If this is so, I would suggest that they add some documentation to the customer indicating why the sander appears to have been used. I kept the original sander and returned the replacement.
Scritto da: BTC Dawn C
Cost little enough you can have 2!
My immediate impression straight out of the box was amazed. It feels so good in the hand and sturdy. I am a heavy user of these things and always used the Makita but lost both mine in a fire. I switch between 80 and 100 so much I need 2 sanders. Was dreading spending almost 600 dollars for the other brand. Literally at this price? I might get 2 more! The pressure release is sort of tight for my fat fingers but easily opened with a contractor pencil. The bag seemed cheap however it's actually very durable and its nice not having it bouncing off your knuckles as hard. ONLY thing I don't like is the position of the power cord on top. Your not supposed to do this.. BUT! I DRIVE 2 nails into a bench and flip it over and sand like a bench top sander. No biggie. Going to make a quick saddle jig. Bottom line? You will absolutely not regret choosing this sander. PERIOD! Been a Hitachi fan for over 20 years. Now under Metabo? Great job. Other Metabo stuff I have and love? 12 inch and 10 inch mitre saws. Framing and roofing nailers. 10 out of 10 on ALL of them.
Scritto da: Mike
A bit diappointed
As instructed, maintain a light touch on the unit. Make sure to keep the belt flush on the sanded surface. Hard to keep sander from gouging so be very careful if working on a fine finish surface. Of course, sand with the grain and check surface often to make sure you are getting the results you want. I was sanding a rought cut hemlock mantel and didn't mind a rustic look. Changing paper is very easy. The see through feature on the front of the unit is useless as it quickly gets covered with dust. You need to tip the unit back to make sure the belt is tracking straight on the rollers. The belt tracking knob is easy to use on the LH side. This sander was not as easy to sand smoothly as my 50 year old Craftsman but is is a lot quieter and has the dust bag which does a decent job.
Scritto da: v c
Worth the minor extra cost
I have tried other lesser expensive items. Unfortunately, they have many plastic parts nowadays and they do not last with modest level work. This item has good weight due to mostly metal construction, this weight then means the machine does with work with minimal down pressure and better control. I have used this unit to do my oak hardwood floors and am very happy with its' performance. I would recommend spending a bit more money to buy a mostly metal hard working unit.
Scritto da: RR69
Powerful, solidly built and easy to use
Purchased this to replace a Black & Decker sander. This Metabo is made of metal so it feels solid in your hands. The dust collector bag is effective but don't let it get overly full. Belt tracking adjustment is simple with a convenient knob allowing to get perfect tracking. Power is abundant. I sanded 9' diameter cedar posts 8 feet long to make the exterior smooth. I did 4 posts in succession which took a couple of hours and ran the sander the entire time with no issues. Great product.
Scritto da: Adrián Alejandre
Buen producto
Es una buena lijadora, excelente potencia y la ventaja que es variable... es sólida, el motivo de las cuatro estrellas es por el juego de la lija, quiero decir que una vez puesta y echando a andar la máquina esta se mueve mucho, aunque ajustes con el accesorio... pero es buena compra..
Scritto da: Yhuve
Poderosa robusta pero poco funcional
Prometía ser una gran herramienta sin embargo tiene puntos de mejora. Es una herramienta que no pude utilizar por lo siguiente: Detalles en la.herramienta, el rodillo guía tenía desgaste en los extremos y la superficie de este tenía irregularidades, tenía la apariencia de haber sido cambiado por uno usado y en mal estado. La palanca de liberación de la de la lija (sanderpaper) no permanecia fija al momento presionarla, lo cual provocaba que el papel lija no pudiera estar estable aún ajustando con el rodillo guía, por tal motivo ni siquiera era posible realizar una prueba de funcionamiento En cuanto al resto de materiales con que fue fabricada los calificaría de muy buena calidad. Revise otra reseña en la cual tenian problemas similares a los míos, lo cual me hizo pensar que había recibido la misma lijadora que le tocó a el, lo cual sería lamentable si ese fuera el caso Es una herramienta que difícilmente podrias utilizar invertida como si se puede hacer fácilmente en otras ya que el cable tomacorriente te lo impedirá. Espero tengas mejor suerte cuando hagas tu compra.
Scritto da: Gabriel O.
Trae pieza dañada y defecto de fabrica
Al sacarla de su caja se escucha una pieza floja por dentro de la pulidora y al usarla se mueve la lija mucho del rodillo delantero (no importa cuánto se ajuste)

Relaterade produkter

hot
Ingersoll Rand 360-418 - Luftbandsslip, 1/2x18 20 000 RPM, 4700 SFPM, 0,6 HP, Chrome
4.1/5

€ 328.42

Ingersoll Rand 360-418 - Luftbandsslip, 1/2x18 20 000 RPM, 4700 SFPM, 0,6 HP, Chrome
4.1/5

€ 328.42

hot
WEN 6321 7-Amp 3 tum x 21 tum Bandslip med sladd med dammpåse, svart 21 tum med sladd + Single Speed
3.5/5

€ 104.93

WEN 6321 7-Amp 3 tum x 21 tum Bandslip med sladd med dammpåse, svart 21 tum med sladd + Single Speed
3.5/5

€ 104.93

hot
Ingersoll Rand G1811-K2 IQV12 Series G1811 Bandslipsats med verktyg, laddare och (2) batterier
3.5/5

€ 595.92

Ingersoll Rand G1811-K2 IQV12 Series G1811 Bandslipsats med verktyg, laddare och (2) batterier
3.5/5

€ 595.92

hot
WEN 6524 Oscillerande band- och spindelslipmaskin
3.6/5

€ 578.84

WEN 6524 Oscillerande band- och spindelslipmaskin
3.6/5

€ 578.84

hot
C.S. Unitec
4.1/5

€ 168.05

C.S. Unitec
4.1/5

€ 168.05

hot
CRAFTSMAN Bandslip, 3-tum x 21-tum (CMEW213)
3.5/5

€ 132.57

CRAFTSMAN Bandslip, 3-tum x 21-tum (CMEW213)
3.5/5

€ 132.57

hot
C.S. Unitec PTX TZ Pyramid Sleeve
4.1/5

€ 167.36

C.S. Unitec PTX TZ Pyramid Sleeve
4.1/5

€ 167.36

hot
Eastvolt 7 Amp bandslipmaskin 200-360 RPM med 6 variabel hastighet, 3 x 18 tums bandslip med 20 st slipband, skruvklämmor, dammpåse
3.2/5

€ 124.58

Eastvolt 7 Amp bandslipmaskin 200-360 RPM med 6 variabel hastighet, 3 x 18 tums bandslip med 20 st slipband, skruvklämmor, dammpåse
3.2/5

€ 124.58

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array

Total:€ 0.00

Se varukorgKolla upp

Kategorier

Alla kategorier
Meny Kategorier Nära Vagn

Menu