Moen 8730 Hemvård 30-tums handtag, rostfritt

Name: Moen 8730 Hemvård 30-tums handtag, rostfritt
Brand: Moen
SKU: 034584175472
Price: 73.26 EUR
Availability: InStock

Brand:Moen

3.8/5

€
73.26

PRODUKTBESKRIVNING Rostfritt stål 1-1/4 tum dold skruvhandtag 30 tums stav är tillverkad av 20 gauge, 304 rostfritt stål med satinfinishade flänsar: patenterad säker monteringsflänsdesign möjliggör installation med 3 skruvar i bultbeslaget medföljer fläns av rostfritt stål locket snäpper på testad upp till 500 LB. Viktdragkapacitet, som överstiger ADA-kraven, överensstämmer med ADA, ANSI, astm, CSA-standarder. Säkra monteringsankare rekommenderas för användning i applikationer utan dubb (ihålig vägg) ankare som säljs separat. Moen SecureMount Stainless 30 tums handtag ger en lätt borstad varmgrå metallisk look. Den är ADA-kompatibel och levereras med en begränsad livstidsgaranti. En äkta Moen-produkt. Moen är dedikerade till att designa och leverera vackra produkter som håller hela livet. Moen erbjuder ett varierat urval av köksblandare, diskbänkar, badrumsblandare och tillbehör samt duschprodukter. Moens produkter kombinerar stil och funktionalitet med hållbarhet för en livstid av kundnöjdhet. FRÅN TILLVERKAREN Moen SecureMount Stainless 30-tums handtag ger en lätt borstad varmgrå metallisk look. Den är ADA-kompatibel och levereras med en begränsad livstidsgaranti. En äkta Moen-produkt. Moen är dedikerade till att designa och leverera vackra produkter som håller hela livet. Moen erbjuder ett varierat urval av köksblandare, diskbänkar, badrumsblandare och tillbehör samt duschprodukter. Moens produkter kombinerar stil och funktionalitet med hållbarhet för en livstid av kundnöjdhet.

Belopp

Lägg till i kundvagn Köp nu

EAN: 034584175472

Kategorier Medicinsk utrustning, Hjälpmedel för rörlighet och dagligt liv, Badrumssäkerhet, hjälpmedel & tillbehör, Bad- och duschhjälpmedel, Bad & dusch Grab Bars,

ADA-kompatibel. Testad till 500 lbs. dra. Begränsad livstidsgaranti. Dold skruv. Rostfri finish ger en lätt borstad varmgrå metallisk look. Dold skruv. Rostfri finish ger en lätt borstad varmgrå metallisk look. BYGGT FÖR ATT HÅLLA: Med stöd av Moens begränsade garanti. SINNESRO: Designad för problemfri installation. ORIGINAL UTRUSTNINGSTILLVERKARE: Äkta Moen reservdel. ERSÄTTNINGSDEL: Idealisk för att reparera problematiska VVS-armaturer utan att behöva byta ut dem. MÅNGSIDIG DESIGN: Kromfinish är mycket reflekterande för en spegelliknande look som fungerar med alla dekorationsstilar.

Assembled Diameter	‎1.25 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Moen
Brand	‎Moen
Color	Stainless
Color	‎Stainless
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 311 ratings 4.7 out of 5 stars
Cutting Diameter	‎1.25 Inches
Finish	‎Stainless
Finish Type	‎Stainless
Included Components	‎Mounting Hardware, Installation Instructions, Grab Bar
Installation Method	‎Wall Mounted
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	33.25 x 3 x 42 inches
Item Dimensions LxWxH	‎33.25 x 3 x 42 inches
Item model number	‎8730
Item Package Quantity	‎1
Item Weight	0.01 Ounces
Item Weight	‎0.01 Ounces
Manufacturer	‎Moen Incorporated
Material	Stainless Steel
Material	‎Stainless Steel
Part Number	‎8730
Pattern	‎Grab Bar, 32 in
Product Dimensions	‎33.25 x 3 x 42 inches
Size	‎30 Inch
Special Features	‎311111Casters
Style	‎Transitional
Warranty Description	‎Limited Lifetime Warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Susan

Easy to install!

Great quality and easy to install!!

Scritto da: Trudy Vander

30" grab bar

Excellent ????

Scritto da: Jay McMillen

Works as intended; looks good. That sums it up.

Easy to install. Fits perfectly. Looks good. What more is there?

Scritto da: Yafi

Don't use included screws!!!

Well I was assuming this was a great brand. The quality of the grab bar is good. I live in the 60-year-old lathe and plaster house. I finally located a stud and wouldn't you know it, the damn head of the screw broke in the stud even after pre-drilling. Changing the position was not a choice I wanted to make. I already had three large holes for heavy duty anchors in the other side of the grab bar. I should have known better than to use the included screws. Please do not use the anchors that are included. They are not adequate for hanging a grab bar, maybe a picture frame. The included screws look hefty enough but it's no good if the head easily breaks off. You have been warned.

Scritto da: Theresa J.

Ordered wrong size; had bought one for other bath--perfect!

We measured wrong, and it was too big. We were very busy with the new bathtub surround that we didn't return it in time. Upset about the short return period because it wasn't cheap. Still in bag/box.

Scritto da: David S. Heller

A big help

My wife has limited mobility and needs assistance in getting in and out of her wheelchair. This grab bar was easily installed in the bathroom, replacing the towel bar that was there initially. It is VERY secure and it gives her a great deal of confidence in transferring from her chair. I would definitely recommend this product

Scritto da: Keith G. Hammerbeck

Go get proper screws at the hardware store.

Like others, I found great quality and design EXCEPT for the included mounting screws. The phillips slot is way too shallow and strips out, even when specified pilot holes have been drilled and soap applied to the threads.

Scritto da: April

Great quality

I installed this in my grandmother’s bathroom so that she had some stability. She is very happy with it.

Scritto da: Pork Chop

Top quality, ease of installation, durable, as with all MOEN products

I am an unconditional fan of MOEN products, having 8 or more of their products (towel holder, toilet paper, shower head, hook, faucet, etc) and added this support. Result is simply outstanding. Not complicated. Got the Zircon StudSensor 70 to find the wood beam on wall near bathtub, with a pencil. Make off 3 holes at top and bottom. Also needs 3 foot long level, for vertical perfection. Needs a power drill. Needs PicQuic Sixpac screwdriver. Since the Philips screws are industry-cheap, and a lot of torque needed on #10 screws in the beams, despite a 3/32 full depth pilot hole ( 2 inches), I strongly recommend stainless steel 2 inch screws, that will not wear out in the process of installation. The Robertson (square head) #10 screw is perfect, keeping in mind that humidity is normal in a watercloset. There is no need for a Tip Holder or Drive Guide or drill bit screwing those in, as can be done easily by hand, and won't strip the head, as going slowly is preferable. Perhaps a washer under the screw head is advisable, since the holes on the support are very large, almost as large than the actual screws, risking the screw simply not holding the suport from the head being too small. A washer around the screw perhaps i the strongly recommended for longevity.

Scritto da: J. Mathie

Moen is great quality!!

Used for a solid grab bar on the back wall of a new tiled shower. Drilling the holes through the tiles was the tough part - but this bar is rock solid. Price was far better than at the Home Depot nearby.

Scritto da: kyu wan shon

good

good