National Hardware N147-165 V550 bröstgångjärn i förzinkat, 2-pack, 1-1/2 x 3/4

Name: National Hardware N147-165 V550 bröstgångjärn i förzinkat, 2-pack, 1-1/2 x 3/4
Brand: National Hardware
SKU: 0038613147164
Price: 30.52 EUR
Availability: InStock

Brand:National Hardware

3.4/5

€
30.52

PRODUKTBESKRIVNING Oavsett om det gäller hem-, gårds-, bygg- eller industrikunder, National har all rätt hårdvara i de storlekar och ytskikt du behöver. Med över ett sekel av service har National åtagit sig att upprätthålla den högsta nivån av produktkvalitet, innovation och tillverkningsteknik. Tillhandahåller kvalitetsgångjärn för alla dina industri-, bostads-, kommersiella och specialbehov. Från slutare till kontinuerliga gångjärn, specialprojekt kan enkelt slutföras med den bredd av unika gångjärn som erbjuds. Zinkplätering erbjuder korrosionsbeständighet för alla dina funktionella hårdvarubehov. FRÅN TILLVERKAREN Oavsett om det gäller hem-, gårds-, bygg- eller industrikunder, National har all rätt hårdvara i de storlekar och ytskikt du behöver. Med över ett sekel av service har National åtagit sig att upprätthålla den högsta nivån av produktkvalitet, innovation och tillverkningsteknik. Tillhandahåller kvalitetsgångjärn för alla dina industri-, bostads-, kommersiella och specialbehov. Från slutare till kontinuerliga gångjärn, specialprojekt kan enkelt slutföras med den bredd av unika gångjärn som erbjuds. Zinkplätering erbjuder korrosionsbeständighet för alla dina funktionella hårdvarubehov.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0038613147164

Kategorier Verkyg & hemförbättring, Hårdvara, Dörrbeslag & Lås, Gångjärn,

Tillverkad i varmvalsat stål. Designad för kistor, skåp, förvaringslådor etc. Tät stift för säkrare applikationer. Gångjärn och skruvar är halvdolda när gångjärnet är stängt.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	National Hardware
Brand	‎National Hardware
Color	‎Zinc Plated
Customer Reviews	4.4 4.4 out of 5 stars 204 ratings 4.4 out of 5 stars
Finish	‎Zinc plated
Finish Type	Zinc plated
Finish Type	‎Zinc plated
Included Components	‎Hardware;Cabinet Hardware;cabinet-and-furniture-hinges
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	7 x 6.2 x 3.1 inches
Item Dimensions LxWxH	‎7 x 6.2 x 3.1 inches
Item model number	‎N147-165
Item Package Quantity	‎1
Item Weight	‎5.9 ounces
Manufacturer	‎NATIONAL HARDWARE
Material	Zinc
Material	‎Zinc
Mounting Type	Cabinet Mount
Mounting Type	‎Cabinet Mount
Number Of Pieces	5
Number Of Pieces	‎5
Part Number	‎N147-165
Product Dimensions	‎7 x 6.2 x 3.1 inches
Size	‎1-1/2" x 3/4"
Style	Classic
Style	‎Classic
Unit Count	2.0 Count
Unit Count	‎2.0 Count

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: W.A.R.

Nice, Well-Made Chest Hinge for 3/4" to 1" Boards

Decent, well-made hinge. Not fancy but they work. I bought both the Zinc Plated (N147-165 V550) and Brass Finished (N147-181 V550) models of this hinge. They are 1 1/2" wide. The 'base' is ~ 2 1/8" from the edge to the center of the hinge pin. The 'offset' is ~ 1 1/8" from the center of the hinge pin to the center of the bend. The 'lip' is ~ 1 1/4" from the center of the bend to the edge. Note: These are listed and marked 'For 3/4" Material' but will accept 1" Nominal Board material with very little fitting as the 'offset' is slightly bigger than 3/4" and "today's" board material is typically undersized. I'll buy again when I need a 'general use' Chest Hinge.

Scritto da: Afranke951

Great item

Good item

Scritto da: Donna Cordell

Good hinge.

Worked perfectly for a hope chest lid.

Scritto da: Melissa Moore

Hinges for ottoman repair

Love Amazon same day delivery! With a burst of Saturday morning motivation, I ordered these hinges along with these support slow close supports (https://www.amazon.com/dp/B01M6XXUM1/ref=cm_sw_r_cp_apa_i_mB6aGbWMB1BDV?_encoding=UTF8&psc=1) to fix my upholstered storage ottoman. This was exactly the combo I needed, and by Saturday night it's all fixed! Easy to install, came with screws that were just the right length to not go through the finished edge of my storage box. Good sturdy product.

Scritto da: James P. Stock

NOT A PAIR JUST ONE HINGE!!!!!!!!!!!!!!

One of the answered questions said this was a pair. Sometimes amazon descriptions are messy like the 20 piece line in the specifications. Not worth the $7. would have been a good price for a pair the bent-over part will fit on a 3/4 board ok with the scared holes just off of center towards the hinge. hinge does not sit flat when closed. I guess I decide to buy another or just find a use for 1 hinge.

Scritto da: Joseph Grullon

Hard to find, Easy to install

After much hunting around Home Depot and Lowe's, I could not find this type of hinge for the life of me for a storage bench I built. I get the idea to look for it on Amazon and what do you know? Here it is! And in the color I need! It is easy to install and brings all the screws needed for installation.

Scritto da: George Heinz

Excellent

I am restoring an old greenhouse and these hinges are perfect. The width is 3/4 inch as stated but the hinge pin adds another 1/8. If you add a 1/8 shim the door is flat. Sturdy, should last many years. Great for out doors application.

Scritto da: Helen Sherrod

Great chest hinges.

This is the second set of hinges I have purchased. As before, they are of good sturdy metal and manufacturing. I like the style because it is simple, yet keeps the hinge screws private and secure.

Scritto da: Murray H.

Great product for its application

Perfect for its application and timely delivery, will purchase again when needed

Scritto da: RV

Solid hardware

Needed this for a little box project and I love how it turned out. Really solid hardware. The price was great.

Scritto da: Blknight

as listed, would buy again

as listed, would buy again

Scritto da: Sylvain

un tres bon produit a bon prix

c est bon

Scritto da: Cat

Not for 3/4" thickness, more like 7/8"

Pros : They work as I expect for a hinge. You'll have to recess them obviously but the bent design fits nicely for a chest. Cons : NOT for 3/4 width as indicated. There are 2 screws hole that you have to screw in the middle of your board and to do that I had to shim it (see photo). If I hadn't do that I would have spliced the wood for sure.