Orbit 35809 PVC-låsfrigöringsverktyg, blandat

Brand:Orbit

3.4/5

30.64

Från tillverkaren Orbit är Nordamerikas främsta företag för bevattning av bostäder. Med närvaro i över 180 länder och 6 kontinenter erbjuder vi det mest kompletta ekosystemet av lösningar för slangkran, slang, slangände, underjordisk, dropp, dimma och gårdsskydd. I över ett halvt sekel har vi lett branschen i innovativa lösningar, samlat på oss över 100 aktiva patent och många branschutmärkelser. Från PVC-Lock, Blu-Lock och Drip-Lock, som är ett utomordentligt snabbt sätt att ansluta sprinklerrör och droppslang, till våra tekniskt avancerade, bästsäljande B-hyve smarta kontroller, vi har moderniserat branschen, satt standard för bästa praxis för bevattning i bostäder, och gjorde utomhusvattning effektiv för hushåll runt om i världen. Hydro-Rain är den banbrytande kommersiella och jordbruksmässiga motsvarigheten till Orbit, med BUILT FOR SPEED-erbjudanden som är utformade speciellt för professionella entreprenörer och odlare. Tillsammans bildar Orbit och Hydro-Rain en affärsenhet inom Husqvarna Groups Gardena-division, som tillsammans består av världens största tillverkare av bevattning för bostäder. Eftersom att säkra tillgången till rent färskvatten för samhällen är en global prioritet, är vi stolta över att bekräfta vårt engagemang för att leverera ett heltäckande ekosystem av smarta lösningar, som täcker tillämpningar FRÅN KRAN TILL GÅRD, medan vi kontinuerligt strävar efter visionen att FÖRÄNDRA VÄRLDENS VATTEN .

Beslag som har utsatts för för högt vattentryck och/eller vattenslag kan vara svåra att ta bort. Används för att installera PVC-sprinklersystem - designade för användning med Schedule 40, Schedule 80 och Class 200 PVC. Fungerar på 1-tums och 3/4-tums PVC-låsbeslag. Frigör PVC-låsbeslag från PVC-rör.
Brand Orbit
Color Mixed
Exterior Finish PVC
Item Dimensions LxWxH 1.75 x 3.9 x 7.25 inches
Item model number 35809
Item Weight 0.01 Ounces
Manufacturer Orbit
Material Pvc
Number of Pieces 1
Product Dimensions 1.75 x 3.9 x 7.25 inches; 0.01 Ounces

3.4

9 Review
5 Star
63
4 Star
20
3 Star
9
2 Star
4
1 Star
4

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: Shemers
3/4" works great, 1/2" not so much
I used the 3/4" fittings to pressure test a pvc assembly that was going to be hard to get to once installed. I used a cap on one end and a threaded adapter on the other. I bought a hose adapter that fit on the threaded end so that I could pressurize it. After testing I was able to remove the cap and the threaded adapter using the removal tool. The connectors went on and came off easy. They don't leak at all. That's the good news. The bad news is that when I tried something similar with 1/2" pvc the connector went on and sealed just as well, but they do not come off very easily. I was able to get the removal tool all the way in, but the little metal teeth in the connector were still dug in to the pvc. I was able to get the connector off by twisting and pulling, but it chewed up the end of my pipe. I have tried multiple fittings and 2 sets of release tools with the same result. I have also tried putting the connector on and removing immediately without ever pressurizing to see if the problem was from over pressurizing. It still scored the end of my pipe. I was hoping that I could use these to make a temporary seal that I could latter remove and glue a permanent connector in its place. With the pipe so badly scored, I think I will have to cut off the end first to get a good glue seal. I have not tried the 1" size yet.
Scritto da: S.S.
Very Useful Tool!
Set up a backup, satellite sprinkler system from the spigot in the backyard. When disconnecting that system in the late fall, this tool makes it a cinch. slide down into the connector and turn and you're disconnected in seconds. Everything reconnects with no issue, either. Worth the minor investment to save a ton of time.
Scritto da: LLP
Must have for Orbit pvc connectors
We used a few of the Orbit 3/4 quick couplers for non pressure pvc line. They are very easy to use and seem to work great. The Orbit release tool is a pretty much must have if you ever plan on taking them apart again. Only used the 3/4 tool so far. The tool is easy to use and releases the connecting barbs without any trouble
Scritto da: Hazard Area
Worked Great
I was fixing a 3/4" underground pipe with the 18" locking flexible pipe sold on this site, and wanted these tools in case I made a mistake and wanted to remove the flexible pipe. I didn't have to use the lock release took, but did use the deburring tool and it worked like a champ. What sold me on this kit is that they threw in the deburring tool with the lock release tools, which I thought was great.
Scritto da: 1 Bama Boy
Get the job done!
Perfect tools for the job. Worked on 3/4 PVC irrigation plumbing. Had my leak fixed in 15 minutes.
Scritto da: Theguyoverthere
Works great
I messed up and tried using a PVC Lock Slide to patch a puncture in my black 1 inch sprinkler line. It didn't work at all. The Orbit 35809 PVC-Lock Release tool set worked great and as advertised. It take a bit of practice to finagle it all the way into the lock slide side, but once pushed all the way, the pipe came right out. Now I can return the wrong part and get the correct one.
Scritto da: Judy Caunter-Crawford
Consider two sets of you need to replace an manifop
They work great. Use it to attach manifolds so we do not need to cut pipe when replacing manifolds. But we needed two to release manifold since the pipes are inches away from each other
Scritto da: S Moore
Do not mistake for eco-lock release tools
I mistook these for eco-lock release tools... not compatible.
Scritto da: Groot
Built with cheap plastic around the extremely sharp flimsy tin/stainless ...
Built with cheap plastic around the extremely sharp flimsy tin/stainless they use to slide into the fitting. For the most part, I ended up cutting off the existing fitting and putting a new one on rather than using these. The plastic started peeling off after first use.

Relaterade produkter

hot
36 delar ESD Safe Go Box MicroBits Set
3.8/5

€ 79.81

36 delar ESD Safe Go Box MicroBits Set
3.8/5

€ 79.81

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array