Red Devil 08090I RD PRO 100 % värmebeständig RTV-silikonförsegling, ett vattentätt och väderbeständigt lim för användning under hög värme, 10,1 oz. Rör, röd, 12-pack 12-pack 10,1 oz

Name: Red Devil 08090I RD PRO 100 % värmebeständig RTV-silikonförsegling, ett vattentätt och väderbeständigt lim för användning under hög värme, 10,1 oz. Rör, röd, 12-pack 12-pack 10,1 oz
Brand: Red Devil
Price: 428.81 EUR
Availability: InStock

Brand:Red Devil

3.5/5

€
428.81

FÖR BÄSTA RESULTAT: Innan du applicerar tätningsmedlet, ta bort gammalt fogmassa, skräp eller andra rester som kan störa vidhäftningen och se till att RTV-fogmassan används på rena, torra ytor för bästa resultat. 50-ÅRS GARANTI FÖR PRODUKTHÅLLBARHET: Förlita dig på Red Devil's Heat Resistant 100% Silicone Sealant för dina projekt som hanterar extrem värme; tätningsmedlet förblir flexibelt och motstår vibrationer med imponerande vidhäftning och ger en vattentät tätning som håller i 50 år. KOMMER INTE att spricka, RYMPAS ELLER FLALA: Med sin icke-sjunkande design, vattentäta och väderbeständiga formel, kommer RTV-tätningen att motstå väder och vind och kommer inte att spricka, skala eller krympa för en pålitlig tätning som håller i flera år. MOTSTÅR EXTREM VÄRMEEXPONERING: RD Pro Industrial Grade Heat Resistant Sealant är formulerad med järnoxid för att motstå extrem värmeexponering och tål temperaturer på 600 grader Fahrenheit (intermittent) & 500 grader Fahrenheit (konstant). RÖD FÄRG FÖR ENKEL IDENTIFIERING: Idealisk för användning i industriella applikationer, det värmebeständiga tätningsmedlet kommer i rött och kan användas på ugnsband, industriugnar, ugnsfönster, torkugnar, pannor, eldade värmare, flänsförsedda rörförband, åtkomstdörrar, uppvärmning Element i apparater och rökkanaler på gasapparater.

Belopp

Lägg till i kundvagn Köp nu

EAN:

Kategorier Industri & vetenskap, Adhesiv, tätningsmedel och smörjmedel, Silicone,

Brand	Red Devil
Color	Red
Item Weight	10.1 Ounces
Material	Silicone
Style	10.1 oz

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Aiden

Did it's job well

Needed it to temporarily seal an exhaust flange after replacing the front pipe. Mating surface on existing center pipe was corroded badly, and I couldn't get a seal. This did the trick while I waited for a new center pipe to arrive.

Scritto da: Oleg Simakoff

Perfect for tough jobs

Nothing else I tried from Lowe's or home Depot worked. This did the job! I need to glue the ceramic cooktop to the metal stove frame. I'd say my only issue is that the color is red. Other than that minor thing, I am very happy with the outcome

Scritto da: Mortimer

Good stuff

So far so good. I used this to re-attach a piece of stone veneer very near the face of my fireplace, was concerned that due to the heat other glues wouldn't stand up. During this time of year, we have the fireplace going pretty much 100% of the time. I have a thermometer on the blower grate and it often reaches close to 400 degrees; the brick I needed to attach was only a few inches away from the grate. I let the fire die down, squirted a couple blobs on the back of the brick and stuck it on. It's tacky enough the brick held itself in place while drying. Been over a week now and it's still attached firmly and we've had the fireplace going 24/7. It works! **Update 4 months later** Still holding strong! We have had the fireplace cooking non-stop since I put this stuff on. No signs of loosening up at all. **Update 3 years later** Bricks adhered with this stuff are still stuck on, it's awesome. I just came here to order another tube for a different brick that fell and thought I would update this review.

Scritto da: Amazon Adam

High performance seal for furnace inducer fan!

Purchased this to fix and create a new seal for a furnace inducer fan assembly. The fan assembly is the heart of the furnace in order to get it up and running. I replaced the inducer fan as the bearings were done. I used this product to create a tight seal to prevent the carbon monoxide and other fumes from entering the basement. In addition to a gasket, I used this to seal the base of the inducer fan assembly to prevent it from leaking anything. The product is the best and withstands 500 degrees temperature. A must for anyone working with a furnace or hot surface that requires additional seal protection.

Scritto da: Lulu1953

Strong easy to use

The glass on my induction eye slide off, instead of buying another. It is better then the one I originally bought!

Scritto da: milleeran

Barely withstood 400° after curing for a week

I am sure it has its applications 600° is not one of them

Scritto da: Ot

Its Caulking

Was very fluid, made it easy to apply, to motor heads.

Scritto da: SoNatStone

Great high temp adhesion, slight off-gas at first burn

I used this to adhere and fiber-cement surround to a zero-clearance direct vent fireplace, seems to be working just fine after several uses. The only issue is we noticed a smell that resembled a hot engine bay during the first couple times we ran the unit after using this product. It hasn't completely gone away, but it is lessening with time. Totally worth it though for the working temp range of the product.