Stop-A-Flat punkteringssäker, taggsäker, no-flat, cykelrör, 16 x 1,75

Name: Stop-A-Flat punkteringssäker, taggsäker, no-flat, cykelrör, 16 x 1,75
Brand: Stop-A-Flat
SKU: 0664332864343
Price: 70.38 EUR
Availability: InStock

Brand:Stop-A-Flat

3.4/5

€
70.38

Dessa Stop-A-Flats finns i flera storlekar. Följ tabellen STORLEK: för att hjälpa dig att välja den STORLEK: du behöver. Sluta slösa bort dina surt förvärvade pengar på rör. Med Stop-A-Flat behöver du aldrig byta en innerslang igen. När du byter ut dina rör med Stop-A-Flat kommer det att spara hundratals dollar och otaliga timmar. Stop-A-Flat har många användningsområden och applikationer för alla hjulförsedda fordon inklusive cyklar, släpvagnar, joggare, barnvagnar och mer! Tillverkad av etylenvinylacetat (EVA-skum). EVA-skum är säkert och motståndskraftigt och används i många vardagsartiklar, inklusive sneakers och träningsmattor. Tillverkade genom sluten cellkonstruktion, de är lätta och vattentäta. Dessa däckinsatser är INTE kompatibla med Raleigh- eller Schwinn-cyklar tillverkade före 1980.

Inga enheter tillgängliga

EAN: 0664332864343

Kategorier Sport & utomhus, Sport & Fitness, Cykling, Däck och slangar, Slangar,

VARNING: Dessa däckinsatser är INTE kompatibla med Raleigh- eller Schwinn-cyklar tillverkade före 1980. KVALITETSMATERIAL: Tillverkade av etylenvinylacetat (EVA-skum). EVA-skum är säkert och motståndskraftigt och används i många vardagsartiklar, inklusive sneakers och träningsmattor. Tillverkade genom sluten cellkonstruktion, de är lätta och vattentäta. MÅNGSIDIG: Stop-A-Flat har många användningsområden och tillämpningar för alla hjulförsedda fordon inklusive cyklar, släpvagnar, joggare, barnvagnar och mer!. EKONOMISKA: Sluta slösa bort dina surt förvärvade pengar på rör. Med Stop-A-Flat behöver du aldrig byta en innerslang igen. När du byter ut dina rör med Stop-A-Flat kommer det att spara hundratals dollar och otaliga timmar. STORLEK: 16 x 1,75 (passar ett 1,90 standarddäck), ETRTO 47-305, fälgbredd 20 mm med en tolerans på +/- 1 mm. Följ tabellen STORLEK: för att hjälpa dig att välja den STORLEK: du behöver.

Brand	Stop-A-Flat
Brand Name	‎Stop-A-Flat
Color	‎Yellow
Customer Reviews	4.4 4.4 out of 5 stars 437 ratings 4.4 out of 5 stars
Included Components	‎Puncture Proof Tube
Item Dimensions LxWxH	‎16 x 1.75 x 1.75 inches
Item Package Dimensions L x W x H	‎21 x 3 x 1.5 inches
Item Width	1.75 inches
Manufacturer	‎Cycle Force Group
Material	Puncture Proof Foam
Material	‎Puncture Proof Foam
Model Name	‎Stop-A-Flat
Number of Items	‎1
Package Weight	‎0.23 Kilograms
Part Number	‎820000001
Size	‎16 x 1.75"
Sport Type	‎Cycling
Suggested Users	‎Unisex-adult
Warranty Description	‎90 Day Limited
Wheel Size	16 Inches

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Juji

Works well

Works well, was pretty easy to install. I like that it's got chunks missing from the inside so it fits the wheel well

Scritto da: Customer of Stuff

Good fit and function. Rough installation.

I bought two of these for my Baby Trend Expedition Jogger. It is a perfect fit. There is no air space on the inside so I am not experiencing what others have described as riding on a flat with these on.This thing feels like it has an inner tube that is fully inflated. I put most of my weight on this wheel by setting it upright against the ground and pressing my knee against the top. I weigh 230lbs and I couldn't get the wheel to even appear flat. I don't see why these wheels wouldn't work on a bike. If people are experiencing what appears to be riding on a flat with these foam inserts than maybe you ordered the wrong diameter of the foam. (I don't mean wheel diameter). This is 16" by 1.75". You probably need a 16" x 2" or wider for your wheel. My stroller wheels are pretty narrow compared to most bike tires so I'm sure if you put this in a wider wheel it would seem like it was flat. I bought these because there are a lot of thorns on most paved trails here in Utah. I didn't want to have to keep replacing tubes. The installation process was difficult for these inserts which is why I give it a 4 star. When you change bike tubes you install them while they are deflated so it is easy to get the tire on and off. Installing these foam inserts is like installing a bike tube while it is fully inflated. There was so much tension on the wheel when getting it on that it broke one of my plastic levers on my tool. You need to have a metal one to do this job correctly. Since I didn't care much about the tire and I was confident I would still work I found an alternative to get these installed without buying a new metal lever. I took heavy duty wire cutters and cut the steels cable that go around the tire. I believe this is called the bead. This allowed me to more easily stretch the tire back underneath the rims. I wouldn't do this installation method on a bike where you are traveling at high speeds since it does slightly compromise the integrity of the tire, but since this is for a stroller that is moving slowly only holding a 25lb kid who is buckled in this won't be a problem. If the tire eventually rips because of my method I will just get it professionally installed the next time. I just didn't want to deal with that right now. Fact of the matter is that it works and it fits on tightly. Installation is brutal.

Scritto da: kim lamarine

Worth the investment

If you live in an area like I do, you can change your stroller tires every week. After reading the reviews, I took the tires to a bike shop to have them installed. Between the $40 for installation and the price of the tires, it was a bit of an investment, but I won't have to keep changing my innertubes which would have eventually cost more.

Scritto da: Badzilla

Forget it

I do not believe reviews that say this thing can be installed. I make stuff. I know how to build stuff. Think about it. 1. It is a stiff foam that must be tight enough so that it roles properly. It must fill up the entire inner area of the tire. 2. Given that. How can you get the 2nd bead in place. Not going to happen. Those 2 things are contradictory. The idea of soaking it in hot water is cute. Even if it becomes pliable enough to get onto the rim, it won't be pliable enough and won't stay pliable enough to get the 2nd side bead in place. If it were made out of some miracle material that can be made very pliable (like a deflatable inner tube) for long enough to be installed, sure, but it isn't. It is not something ordinary people can use. I intend to keep it and work around the FACT it cannot be installed like an inner tube. I bet they can make something resourceful people could use better than this, in combination with something else, to achieve the same goal.

Scritto da: ComputerNeenja

Bought One - 16" x 1.75" tire on my Swagtron EB7 e-bike - LOTS of Resistance

Pros: - No more rear flats. I am about 170-180 lbs and I was getting flats every 1-4 weeks from thorns in the Bay Area. - They do work, but not as well as an airtube. - Gets me to work reliably. - I've ridden hundreds of miles on it so far. - 3 good flat heads or 3 small crowballs from the dollar store can get this in easily. *Note 3, not 2, but 2 can do it. Cons: -People have asked me if my rear tire is flat a few times. One lady even offered to give me air. Yeah, it's that bad. -My e-bike could get 15.5 miles with no pedaling. Now the motor only mode gets about 8-10 miles. There is a lot more resistance. Wrapping the rear tube with gorilla tape might help...not sure. Tire liner failed horribly so I ripped it out. --Say good bye to your family jewels if you hit a road bump or pothole...it hurts on this one. Seriously, you feel it more than an air tube. -If you get water in your tire, your wheel will squeek moderately loud. -Pedaling on the e-bike before was ok. Now I do not want to pedal even one mile without motor assist. That is how much resistance one of these tubes add. Yes, I would even bike 20-25 miles a day on a 16" tire e-bike to deliver food. Conclusion: This works and it is reliable for 3-10 miles trips on my 15.5 mile range swagtron eb7 I am going to try a air tube again with better tire and liner (hoping I don't get thorns often). Wrapping the 16" tube with gorilla tape might work better, but I am not going to experiment with that right now. If Stop-A Flat made a 16" adult tube with less resistance that would be awesome. I'd give this product 3-3.5 stars, but it does meet the objective, which is no flats. I can't decide if 50-100% more resistance is better than flats with far less resistance. I know I absolutely hate flats. They need to improve this product more and then they have something really good for adult bikers. I'm sure a kid would be fine on this....3 stars.

Scritto da: Jeremy

Very hard to install

We tried to install this tire with no success, so we returned.

Scritto da: Bob Barker

Impossible to install yourself, but worth it.

We had these installed on the Thule urban glide 2. If you want to spend a whole evening cursing and angrily wrestling this on, only to give up and have someone else do it for free, be my guest. Apparently REI will install these for free if you are a member, wish I would have known that sooner... Anyways, pretty sure I'm going to wear out the rubber on the wheels before these would ever need to be replaced. Super happy to not have to deal with flats!