0
0

Total:€ 0.00

Se varukorgKolla upp
LoginRegister
0

Total:€ 0.00

Se varukorgKolla upp
LoginRegister

BLACK+DECKER Bandslip med dammpåse, 7-Amp, 3-tum x 21-tum (DS321)

Brand:BLACK+DECKER

3.4/5

€
146.01

PRODUKTBESKRIVNING Lägg till efterbehandlingsdetaljerna till ditt projekt, släta ut grova ytor, förfina kanter och mer med BLACK+DECKERs Dragster 7.0 Amp elektriska bandslipmaskin. Motorn på 7,0 Amp ger massor av kraft för att få jobbet gjort, och tack vare bandsliparens sladdade design har du obegränsad körtid för längre uppgifter. Denna elektriska slipmaskin är vinklad för precisionsslipning av angränsande ytor, medan den jämna, lågprofilerade designen utökar funktionaliteten även på vertikala ytor. Dessutom exponerar den infällbara huvan toppen av slipbandet för extra funktionalitet i trånga utrymmen. Ett justerbart handtag i 3 lägen håller dig bekväm, medan en dammpåse som är lätt att tömma fångar upp partiklar och håller din arbetsyta renare. AMAZON.COM Med en innovativ främre rulle som gör att du enkelt kan nå även de smalaste hörnen och minskar behovet av spolslipning, är denna 6,0 Amp slipmaskin från Black & Decker idealisk för heminredningsentusiaster. Kompakt och lätt, Dragster DS321 har ett infällbart trelägeshandtag för optimal kontroll och en dammuppsamlare för att hålla ditt arbetsområde rent för bättre sikt. När det är dags att byta papper använder du helt enkelt bältesfrigöringsspaken och justeringsratten (som säkerställer att bältet förblir i rätt läge) och du är redo att börja arbeta igen.

Inga enheter tillgängliga

EAN: 0028877479453

Kategorier Verkyg & hemförbättring, El & handverktyg, Elverktyg, Sanders, Bandslipmaskiner,

Inkluderar medelstort slipband, dammpåse och bruksanvisning. Mått: 15,4 x 6,2 x 6,1 tum (BxHxD); väger 8,2 pounds; 2 års garanti. Dammuppsamlare håller arbetsområdet rent för förbättrad sikt. Infällbart handtag i tre lägen för optimal kontroll. Innovativ frontrulle gör att du enkelt kan nå även de trångaste hörnen. Se tillgänglig användarmanual nedan om säker användning av verktyget. INGÅR – (1) DS321-slipmaskin, (1) slipband med medelstort korn, (1) dammpåse. TRADAD – Trådad design ger obegränsad körtid för även de största jobben. DAMMINSAMLING OMBORD – Lätttömd dammpåse håller ditt arbetsområde renare och förbättrar arbetsytans synlighet. INDRÄCKBAR HUVA – Exponerar toppen av slipbandet för mångsidig användning, även i trånga utrymmen. SPONT, LÅGPROFILDESIGN – Ger en utökad räckvidd för förbättrad funktionalitet och möjliggör slipning av vertikala ytor. 3-POSITIONSHANDTAG – Justerbart handtag håller dig bekväm i olika orienteringar och hjälper till att minska muskeltrötthet. VINKELBAND – 3 tum x 21 tum. slipband slipar 3x närmare kanten på angränsande ytor. 7,0 AMP MOTOR – Levererar maximal effekt för maximal prestanda.
Amperage Capacity ‎7 Amps
Batteries Included? ‎No
Batteries Required? ‎No
Brand BLACK+DECKER
Brand ‎BLACK+DECKER
Color ‎Multi
Country of Origin ‎China
Customer Reviews 4.3 4.3 out of 5 stars 1,916 ratings 4.3 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish ‎black
Grit Type Medium
Grit Type ‎Medium
Included Components ‎DRAGSTER WITH UPGRADE TO 7 AMPS
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 15.25 x 6.32 x 6.32 inches
Item Dimensions LxWxH ‎15.25 x 6.32 x 6.32 inches
Item model number ‎DS321
Item Package Quantity ‎1
Item Weight ‎6.5 Pounds
Manufacturer ‎Black & Decker
Material ‎Blend
Measurement System ‎Metric
Part Number ‎DS321
Power Source Corded Electric
Power Source ‎Corded Electric
Product Dimensions ‎15.25 x 6.32 x 6.32 inches
Size ‎One Size
Voltage 120 Volts
Voltage ‎120 Volts

3.4

13 Review
5 Star
66
4 Star
17
3 Star
8
2 Star
3
1 Star
6

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: biglarrr
Best design of a hand sander I've ever seen
This sander hastwo handles for better control and a locking trigger so that if you can mount it somewhere you can turn it on and keep it running while moving the part your sanding with both hands. I hope it lasts.
Scritto da: Phatjules
Phenomenal sander
Love the sander, the flip up front body allows close to the edge control. The bag is a terrible design. All in all a highly recommended belt sander.
Scritto da: Ketchup
Versatile
Good tool. Very versitile sanding the wood shingles on my house before painting. They were in bad shape. I would have appreciated a little more power for the kind of deep sanding I was doing, but this did the job and made up for it with being right size, weight, and able to get into tight areas. Would buy again. If you're doing a lot of sanding, buy plent of belts. They tend to break or stretch after 20 minutes or 30 minutes of heavy use.
Scritto da: EVERITHEIANA
dust collection is useless, belt tracking adjustment weak
from the moment it came out of the box, sanding dust collection does not work, and it is impossible to check or clear any clogs without totally disassembling the sander. also, the belt tracking is yet to be desired., i had to shim the rear mounting screw with a washer at the point of attachment so i had enough adjustment to center the belt while using it... on a good note this sander has power to spare, and holds the belts well even under pressure. my (rigid) sander's belt slips on the driving wheel when they heat up, this sander holds up well and i am using it on hard wood floors. so it is better than just ok but designers need to tinker with to make it more user friendly
Scritto da: Amazon Customer
nice quality fair price
very happy light weight yet powerful
Scritto da: Paul Sisk
Best belt sander I have ever owned. Issues in reviews are unfounded.
So I have owned many belt sanders in my day. In fact, I have 3 others presently when I decided to buy this one. The primary reason for this purchase was this sanders' large front space in front of the handle to be able to get under railings. My project is sanding a deck with existing vinyl railings that none of the other sanders could get under. So this seemed like a perfect solution. I got the sander and put it right to work. I paid attention to the front wheel and adjustment as many reviews here complained that it was badly engineered and the belt kept coming off. I completed about 150 feet of edging, under railings and along the house on this deck and the belt acted exactly as you would expect; if you push in one direction it will move in the opposite direction. In other words, if I am pushing down on the front of the machine and I slide the machine to the left, the belt will want to move to the right. It isn't an engineering issue, its physics. Anyway, great product. Did exactly what I wanted it to do and solved a great problem because of the unique design. Well done B&D.
Scritto da: Charmaine N.
Tracking was fine.
First, it comes with one Aluminum Oxide, cloth backed, 60 grit belt already installed; in my case, it was also well tracked. If you are sanding wood, this will chew through it and leave a rough finish, so you will want to purchase other belts of higher grit numbers. I had pretty smooth results with 150 grit on cedar and then hit it with 240 for a super fast pass with a hand block (not many belt sander belts above 150 grit). The included belt is probably best for paint or extreme rust removal, it's just too coarse for most wood applications. The major complaint everyone has is belt tracking, but I found the tracking to be pretty good and easily adjusted. However, the tracking changes when actively sanding vs no load on the belt. It's not by much and you can get a sweet spot where it tracks in both cases; I'd also consider this pretty normal and I track a lot of belts (conveyors, printing presses, etc). There is a special card reminding you which way to turn the adjustment knob and it is listed in the manual (screw in and belt tracks in toward knob, screw out and belt tracks out away from knob), couldn't be easier. My only complaint is I had a tight spot where I kept bumping the knob and would have to stop and turn it back or my belt would walk out. I would rather a tracking knob that is then locked in place by a tightening nut thingy. The dust collector bag is held on by tying a string and is a pain in the ass. Whoever ties that in the factory must have tiny hands or one of those surgical robots. There is a sold-separately service part/adapter that allows you to hook a vacuum to it mentioned in the manual, but I used a bike tube and a hose clamp and it works great. I found the fixed speed to be set fairly well and it did not get too hot after an hour of pretty constant use. I did use the included belt for some rough work where some boards really didn't line up and it worked fine, seems like a nice belt. I took away one star because the thing is crazy loud; earplugs are a must.
Scritto da: aeis
Worked flawless.... after small learning curve.
So first off. I've never used a belt sander before. In the pics this is a 30+ year old bench built by my grandfather. Just sitting on it and you got seven splinters. I decided to take apart, rebuild, and stain. So for the first run... belt was flying all over the place. Complete fail. However! You have to take time. Read instructions. Turn unit over, set, and adjust the dial. The dial adjustments are actually quite small. A quarter inch turn, turned out perfect. It is very important to get this set FIRST! After figuring this out was flawless. Ran like a champ. Removed dust bag as this volume of dust was ridiculous. Overall best idea ever, super affordable, and worked like a dream. Highly recommended. Just take the time and learn how to adjust the lock the belt. Cheers and good luck!
Scritto da: v c
Not durable
The item arrived and looked fine. Instructions were good. I am a retired surgeon and retired licensed mechanic. I have used many types of tools in my life, including many types of drum, vibrating, and belt sanders. When a user exerts downward pressure on a belt sander, they can easily hear if the motor labours or slows. even the slightest amount. It is easy to get the feel of a machine/tool. This unit without any stress on the motor within the first hour of use developed clutch/drive spindle shear so that under any mild load would stop rotating. This makes the unit useless. I suspect gears or drive shafts of less than optimal hardness, thus easily "jumping" after mild use. Essentially I either got a "lemon", or the metal/plastic they use is of lesser durability than consumers require.
Scritto da: Grant Fleury
Great little unit!
Sanded a lot of thick old paint from 2x4's and 2x6's and thus able to repurpose a lot of lumber and save a few trees! A little noisy - all good when you wear some earplugs! Have to keep an eye on the alignment when you press harder on the unit when sanding, but that's the same for all belt sanders. Once you get used to this peculiarity, it's all good! Very satisfied!
Scritto da: J. W
Stay away.
I'd stay away from this. The belt keeps sliding sideways and wont stay on straight. It has enough power and seems durable enough for the price but if it wont work properly then what's the point?
Scritto da: James Newman
Very happy with the performance of this sander
I had to sand down a 1000 square foot deck and this sander exceeded my expectations. I thought that I wanted a 4" wide sander but I don't think that a bigger and higher voltage sander would have been better. This was enough for me to handle. The narrow front allowed me to get under the railings. The narrow width allowed me to sand the risers on the stairs. If you are painting a deck, I highly recommend getting a Shur Line 7" Pad. I've always been old school and used a paintbrush, but the pad saved time and you no longer need to be on your knees. After doing the sanding you will appreciate being on your feet. Used a brush on a pole to do the cracks and went back over with pad... Fraction of the time spent and a better final finish as there are no brush marks. Changing the sandpaper was easy, there is a little knob to adjust the alignment from side to side. I will see how long this sander lasts.
Scritto da: Lilia S.
Great belt sander for tight spaces
Was sold out everywhere in my area and luckily found it on Amazon for a great price! No surprise why it was sold out, I guess many caught up into the many benefits and great features of this sander. Sanded the entire porch with it and did a great job with no issues. The best feature is that it is one of the most light weight sanders we tried and it's still powerful. The second best thing is the thinner "nosing" part is just the perfect thing for sanding between spindles or any other tight areas - very convenient. Overall, a great piece of equipment! Would highly recommend it to anyone planning a not so small sanding project.

Relaterade produkter

hot
WEN 6307 detaljslip med variabel hastighet med 1/2 x 18 band
3.6/5

€ 85.19

WEN 6307 detaljslip med variabel hastighet med 1/2 x 18 band
3.6/5

€ 85.19

hot
CRAFTSMAN Bandslip, 3-tum x 21-tum (CMEW213)
3.5/5

€ 132.57

CRAFTSMAN Bandslip, 3-tum x 21-tum (CMEW213)
3.5/5

€ 132.57

hot
JET JAT-750, 3/8 x 13 pneumatisk minibandslip, 20 000 rpm, 1/2 hk (505750)
3.8/5

€ 496.98

JET JAT-750, 3/8 x 13 pneumatisk minibandslip, 20 000 rpm, 1/2 hk (505750)
3.8/5

€ 496.98

hot
Ingersoll Rand G1811-K2 IQV12 Series G1811 Bandslipsats med verktyg, laddare och (2) batterier
3.5/5

€ 595.92

Ingersoll Rand G1811-K2 IQV12 Series G1811 Bandslipsats med verktyg, laddare och (2) batterier
3.5/5

€ 595.92

hot
JET JAT-752, 1/2 x 24 pneumatisk bandslip (505752)
3.8/5

€ 478.58

JET JAT-752, 1/2 x 24 pneumatisk bandslip (505752)
3.8/5

€ 478.58

hot
WEN 6502T 4,3-Amp 4 x 36 tum Bälte och 6 tum skivslipmaskin med gjutjärnsbas 6-tums skiva med gjutjärnsbasskivslipmaskin
3.6/5

€ 311.54

WEN 6502T 4,3-Amp 4 x 36 tum Bälte och 6 tum skivslipmaskin med gjutjärnsbas 6-tums skiva med gjutjärnsbasskivslipmaskin
3.6/5

€ 311.54

hot
C.S. Unitec PTX TZ Pyramid Sleeve
4.1/5

€ 167.36

C.S. Unitec PTX TZ Pyramid Sleeve
4.1/5

€ 167.36

hot
WEN 6321 7-Amp 3 tum x 21 tum Bandslip med sladd med dammpåse, svart 21 tum med sladd + Single Speed
3.5/5

€ 104.93

WEN 6321 7-Amp 3 tum x 21 tum Bandslip med sladd med dammpåse, svart 21 tum med sladd + Single Speed
3.5/5

€ 104.93

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array

Total:€ 0.00

Se varukorgKolla upp

Kategorier

Alla kategorier
Meny Kategorier Nära Vagn

Menu