DROK® Micro Load Battery Tester Board USB 0.15-3A 15W Justerbar konstant ström elektronisk belastning, Laddardetektor Ålderstestenhet Urladdningsmotstånd med intelligent kylfläkt

Name: DROK® Micro Load Battery Tester Board USB 0.15-3A 15W Justerbar konstant ström elektronisk belastning, Laddardetektor Ålderstestenhet Urladdningsmotstånd med intelligent kylfläkt
Brand: DROK
Price: 37.99 EUR
Availability: InStock

Brand:DROK

3.7/5

€
37.99

Beskrivning: Denna elektroniska last som är försedd med en vanlig fläkt är speciellt designad för amatörer. Fläkten startar eller slutar intelligent styra temperaturen cirka 40 ℃. Dessutom stöder den kontinuerlig 15W urladdning för non-stop arbete. Det är ett bra val för amatörer att använda denna produkt för urladdning eller åldringstest av produkter. Parametrar: Tillämpat spänningsområde: DC 3,7V-13V Justerbart strömområde: 0,15A-3,00A Elurladdning: kontinuerlig 15W Temperaturkontroll: ca 40 ℃ Instruktion: 1. Justeringsratt för konstantströmpotentiometer: den kan öka strömmen genom att rotera medurs och minska strömmen genom att rotera moturs. 2. Starta eller stoppa reserverat gränssnitt: Fläkten startar eller stannar automatiskt tillsammans med ändring av temperaturen som standard. När mittenplattan ansluts till ON-plattan betyder det att den slås på; när den ansluter OFF-plattan, hänvisar det till att stänga av. 3. USB-positiva och negativa poler kan tas ut individuellt; Detta har ett brett användningsområde. 4. NTC-termistor: den styr fläkten att automatiskt starta eller stoppa när dess temperatur är cirka 40℃. Paketet innehåller: 1 x USB elektronisk laddning

Belopp

Lägg till i kundvagn Köp nu

EAN:

Kategorier Elektronik, Industri & vetenskap, Batteritestare,

Observera att den genererar lite värme vid användning, var försiktig och håll den borta från brännbara och explosiva varor. Har hög kompatibilitet och USB-positiva och negativa polen kan ledas ut separat, kan appliceras på fler områden. Utrustad med intelligent fläkt som automatiskt slås på när temperaturen är ca 40 ℃. Har mycket stabil urladdningsström, den justerbara konstantströmmen är 0,15-3A, justera skruven medurs/moturs för att öka/minska konstantströmmen. USB-lasttestaren stöder kontinuerlig urladdningseffekt 15W och Qualcomm QC2.0 högspänningsurladdning, driftsspänningen är 3,7V-13V.

Brand	DROK
Color	green, silver, Black
Country of Origin	China
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	2.68 x 1.18 x 0.91 inches
Item model number	DR-US180053
Manufacturer	DROK
Power Source	Battery Powered
Product Dimensions	2.68 x 1.18 x 0.91 inches; 1.06 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: HR

A good base level devise that works very well

I generally use this adjustable load to check the capacity of usb connected batteries. It's a basic devise that allows you to adjust the discharge current up to a rate of 3 amps. To record the actual capacity I added the DROK power meter which will measure the discharge capacity in mah. This particular power meter does not save the mah measurement after the power is drained so I have added one that does. Overall I like the simplistic design of this unit. It makes it very easy to set up and use for discharge applications. Good product at a great price.

Scritto da: Parf

Just what I needed

So, I bought a new reclining sofa that has built in USB charging ports on the switches. One of the switches USB ports is shorted out to full power, and killed my son's iPad, and my wife's iPhone 7+. I bought this load to be used with anEversame USB Digital Power Meter Tester Multimeter Current and Voltage Monitor, DC 5.1A 30V Amp Voltage Power Meter, Test Speed of Chargers, Cables, Capacity of Power Banks-Black . It worked great for the 10 minutes I needed it. I used the pair to test an iPhone charger 5V 2.1A. I increased the load to 2.8A, and the charger dropped to only supplying 3V. I turned the load down to 2.1A and went to test my couch. The right side looked good. Both ports 5V 2.1A. I went over to the left side ports, slid the tester into the top port, and *POP!*, a spark, and the bottom of the power connector blew off this load. It sacrificed itself to obtain proof for my warranty claim with the manufacturer. I'm buying a replacement right now, so I'll have it available to test the repaired switch when the service call is completed.

Scritto da: transmitterguy

Good little tool to have.

I use this to check the output current of my phone chargers to make sure they put out enough power to charge my stuff quickly. I mark on them with a sharpie what the max value each one can put out. I get rid of the old low current chargers.

Scritto da: Blbeach

It does what it says.

I have a 60000 mAh power brick that I have as an emergency power bank to charge USB devices. Once a month I need to drain it down to zero and then charge it back up to 100. This is exactly what I needed to do that.

Scritto da: Noah Ferro

Not bad

Works ok, I only downside I see. theres no thermal compound betweent the TIP122 Transistor and the heatsink Also a knob for the adjustment would be nice

Scritto da: Bob Johnson

Inexpensive but adequate for the job

The load can be adjusted to almost 2 amps and the built in fan comes on when needed to prevent it from getting hot. Easiest way to drain your USB battery banks so you can be ready to test their true capacity. Note, you must buy a device to measure the charge and I recommend the Klein tools ET 920 USB test unit found on Amazon. It is bulletproof and made by a well know electrical tools manufacturer.

Scritto da: Dennis R. Morgan

This product works GREAT!

I use this product to set a constant 5 volt 1.0 amp load to test the power capacity of USB battery packs. I plug a USB power meter into the battery's USB port and then plug the DROK Micro Load Battery Tester Board into the power meter. This give me an easy way to compare different battery packs. It works great!

Scritto da: Bill

Does exactly what I wanted.

I used this device to put a load on a small boost board in order to test its reliability. I used it in conjunction with an inline load meter to verify the current capabilities of that board. If you adjust it up above a certain point that the heat sink alone won’t dissipate, the tiny fan will automatically kick on to prevent an overheating situation. Highly recommended!