0
0

Total:€ 0.00

Se varukorgKolla upp
LoginRegister
0

Total:€ 0.00

Se varukorgKolla upp
LoginRegister

Hover-1 Beast Buggy Attachment

Brand:Hover-1

3.2/5

€
233.85

Förvandla din hoverboard till en elektrisk gokart med Hover-1 Beast Buggy Attachment och bygg en futuristisk transportenhet som gör din pendling rolig, cool och njutbar. Kompatibel med de flesta självbalanserande elektriska hoverboards med 10” hjul, detta gokartfäste fäster perfekt på din elskoter och är perfekt för vuxna eftersom det ger fullständig stabilitet och kontroll. Den har ett bekvämt säte, dubbla handmanövrerade joysticks och en oberoende bakhjulskontroll som möjliggör enkla svängar och backning. Den justerbara ramlängden kan anpassas beroende på din längd och komfort, medan de justerbara remmarna säkert fästs på hoverboarden för en säker körupplevelse. Alla Hover-1 elektriska hoverboards är testade och certifierade. Vi rekommenderar starkt att du kontaktar Hover-1-supporten för eventuell felsökning innan du returnerar. Lösningen är oftare enkel och vi hjälper gärna till! Vi uppmuntrar alla ryttare att bära rätt säkerhetsutrustning för att skydda sig själva. Besök Hover-1 Brand Store (klicka på vårt varumärke) för att hitta hjälmar, knä- och armbågsskydd och gör dig redo att åka till stan.

Belopp
Lägg till i kundvagnKöp nu

EAN: 0888255199454

Kategorier Sport & utomhus, Sport & Fitness, Scooters & Equipment, Skridskor, Skateboards & Scooters, Självbalanserande Scooters,

HJÄLMAR OCH SÄKERHETSUTRUSTNING (SÄLJS SEPARAT) - Använd alltid säkerhetsutrustning när du cyklar. Vi rekommenderar Hover-1 hjälm, knä och armbågsskydd för att skydda dig själv och hålla de goda tiderna igång. Följ bruksanvisningen noggrant innan montering och installation. ROLIGT FÖR VUXNA - Garanterat kommer att ge timmar av nöje för familj och vänner i vilket område som helst, hoverboardsätet kommer säkerligen inte att göra dig besviken och är en utmärkt present. ENKEL INSTALLATION - Gokartfästet inkluderar alla nödvändiga monteringsredskap som skruvar, skiftnycklar, muttrar, bricka och andra reservdelar som krävs för att montera gokarten. Manualen innehåller en steg för steg installationsguide för din hjälp. HELT JUSTERABAR & SÄKER - De justerbara remmarna med gummiskydd fäster säkert vagnen på din elektriska hoverboard-scooter och garanterar total säkerhet, medan den justerbara ramlängden möjliggör anpassad och bekväm körning. FULL KONTROLL OCH STABILITET - Sätesfästet har handmanövrerade joysticks på båda sidor som ger fullständig kontroll och enkel manövrerbarhet, medan den oberoende bakhjulsdriften möjliggör snabba svängar och körning framåt/bakåt. FÖRVANDLA HOVERBOARD TILL GO-KART - Förvandla din elektriska hoverboard-skoter till en vägvagn med Hover-1 Beast Buggy-tillbehör för en ny nivå av nöje. Kompatibel med de flesta 10 Hover-1 (rekommenderas) & icke-Hover-1 hoverboards (hoverboard säljs separat).
Age Range (Description) Kid
Brand Hover-1
Brand Name ‎Hover-1
Color Black
Color ‎Black
Customer Reviews 4.2 4.2 out of 5 stars 909 ratings 4.2 out of 5 stars
Grip Type ‎Contoured
Included Components ‎Go-Kart
Item Dimensions LxWxH ‎26 x 9.84 x 21.85 inches
Item Package Dimensions L x W x H ‎21 x 20 x 11.5 inches
Item Weight 10.11 Pounds
Item Weight ‎10.11 Pounds
Manufacturer ‎DGL Group
Material ‎Aluminum
Model Name Beast Buggy
Model Name ‎Beast Buggy
Number of Items ‎1
Package Weight ‎8.82 Kilograms
Part Number ‎HY-BEAST-BGY
Size ‎One Size
Style ‎Beast
Suggested Users ‎Self Balancing Scooters
Warranty Description ‎90 days

3.2

11 Review
5 Star
66
4 Star
11
3 Star
8
2 Star
4
1 Star
11

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: Kindle Customer
Arrived in a soaked box with rust and mold
This project going to take a bit to get started. Interior box was more than just damp. It was soaked. Mold in box, all over parts. Rust on painted and non-painted parts. I'll start drying it out, treat the rust and maybe start assembly. This was delivered to a part of the country with snow. The wet box occurred somewhere else. Hopefully, this well turn out to be ok. Not like my kids won't get it dirty. Follow-up: cleaned and removed the rust. Applied oil to all areas the might rust. The wheel needed grease, air and adjustment to work 8 properly. After drying out all the parts and assembly, took an hour or so. This is not a easy build and takes time. Definitely a DIY project. They did include tools to assemble the unit. Operation: installation was straight forward. It worked fine. The oldest kid was racing everywhere. The youngest kid had to play with controls for awhile. I moved this up a star. It works great, once I overcame the initial issues.
Scritto da: Robert Valade
great memories made
amazing product! fun to get energy out of kids great memories made with this item!
Scritto da: David Gibbs
Great addition for hoverboard
We got this for my 8 year old son who doesn't have great balance and wasn't getting much use out of his hoverboard. He can now safely ride and enjoy himself! Great buy!
Scritto da: Anon
Comes with the exact amount of parts needed.
This is a minor concern of mine. The instructions for the seat assembly was kind of confusing for me. Instruction number 4 tells you to use 4 of the smaller nuts and screws, but if you look more closely at the picture, it clearly shows you to put the washers before the nuts get put on (it's not mentioned anywhere on #4 for use of washers) and the instruction manual tells you there are only 4x washers to begin with. On instruction number 5, it actually says to use both the screws and nuts along side the washers on the tire assembly. So really, there should actually be 8x washers in total or 4x smaller washers for the seat. All in all, the assembly part of this kit was well done, now I just need to wait for my hoverboard to be delivered. I'll give an update on how it works from here on.
Scritto da: Chris Watson ????✨
Decent size for older/ bigger kids
I wasn’t very happy with this purchase, Velcro that attaches go cart to hover board wears down and breaks pretty easily. Seat isn’t very comfortable especially for “bigger size “ kids. Handle bars were oddly placed and doesn’t quite sync with steering of the hover board.
Scritto da: Meli Bailey
Bracket and Wheel Issue
The attachment is sturdy and beautiful. . . Until you get to the front wheel assembly. I bought 3 of these to replace previously purchased lesser karts. This is much better. It has amazing suspension, the seat is comfy. There are actual foot rests. There's even this big, sturdy, heavy as all get out wheel. . . Except, that's previous reviewers have stated, the wheel shakes and shimmies like all get out because the bracket is too wide for the axle. Hover-1's solution was to try to squeeze the bracket enough to where it would fit the wheel. This would have worked, if it had been done evenly. Instead, one side of the bracket is askew. I am super lucky, my husband is really handy. He added washers equally to both sides to stabilize the wheel and bracket. Now, we've only built 2 out of 3 of the buggies. Only one had the wheel and bracket issue. The other works great and is being fully enjoyed. Which is why I give this 4 stars.
Scritto da: Stefanie Urgo
Has been welded crooked; doesn’t function properly
I ordered 2 of these Hover-1 Beast Buggies as gifts for my kids. They came very nicely packaged, but upon opening one of them I noticed that there were some rust marks on the tops of some of the attached screws and a piece of the enamel paint was chipped off of one of the pieces. I immediately took photos and contacted the company because all over the box and manual it said to contact them for any damaged or missing parts. I filed a claim on their website as instructed. It has now been a month and I have yet to hear from them. They also inform you not to file another claim from that order number or their computer system will automatically cancel out both. Anyways, on the first day after opening the boxes I started to assemble them. Then I realized I had a bigger problem then just some chipped paint. Some of the pieces have been welded off square and after assembly of the buggy the parts that attach to the hoverboard are not lined up straight. I included photos of this. Then, I thought maybe I could loosen the screws to move the L shaped brackets more in line with the hoverboard edges, but guess what? They were painted AFTER being put on and won’t budge. After I assembled both buggies I decided to try to put them on the hoverboards. So I was able to strap them on...they do press onto the pads and make the whole unit move...but because everything is off square one handle is always higher and one lower when even trying to go straight. Turning one direction is very easy and turning the other direction really takes a lot of muscle.... Overall, I am disappointed especially because this one is not a cheap model to buy. I think that the idea of it is great, but with one little mistake during manufacturing and this buggy became difficult to use. I will point out that I tried it out with our SWFT Hoverboard with 10” wheels and even at top speed I did not see any of the front wheel wiggle that some users had mentioned. I am wondering if they were using a hoverboard with wheels smaller than the recommended 10”. So, overall I would not recommend this until they can up their quality control during manufacturing. If they do, this would be a fun buggy.
Scritto da: john d curry
so perfect for me.
easy to assemble and works as it should.
Scritto da: Mr Adam Iles
Great fun...
Great addition to the Hover 1 hoverboard... kids big and small have had great fun with it.
Scritto da: nancy remblay
Not worth it
The front wheel lasted maybe a week!
Scritto da: Melissa L.
only remotely related to the product that you will recieve.
The buggy i recieved is fine and it works but it is not the product i intended to buy. shame on this dealer! sent me a buggy with no spring suspension and subpar connectors, just a regular buggy and not the one i thought i was paying for.

Relaterade produkter

hot
Gotrax HoverflyKart Hoverboard Kartsäte Tillbehör för 6,5 8 8,5 10 Självbalanserande skoter, justerbar ramlängd och styrkontroll Buggy-tillbehör, Hover Board Go Kart-tillbehör Svart
3.2/5

€ 182.66

Gotrax HoverflyKart Hoverboard Kartsäte Tillbehör för 6,5 8 8,5 10 Självbalanserande skoter, justerbar ramlängd och styrkontroll Buggy-tillbehör, Hover Board Go Kart-tillbehör Svart
3.2/5

€ 182.66

hot
Hover-1 Beast Buggy Attachment
3.2/5

€ 233.85

Hover-1 Beast Buggy Attachment
3.2/5

€ 233.85

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array

Total:€ 0.00

Se varukorgKolla upp

Kategorier

Alla kategorier
Meny Kategorier Nära Vagn

Menu