JET klippfärdigt sandpapper, 180 korn (60-9180)

Name: JET klippfärdigt sandpapper, 180 korn (60-9180)
Brand: Jet
SKU: 0696738209374
Price: 226.66 EUR
Availability: InStock

Brand:Jet

3.3/5

€
226.66

PRODUKTBESKRIVNING Färdigmärkt för skärning. Inga skarvar, sömmar eller brott. Fyll på med detta OEM-godkända sandpapper, garanterat att ge det bästa resultatet. FRÅN TILLVERKAREN Varje Ready-To-Cut(tm) innehåller en rulle med slipmaterial som är förmärkt och färgkodad. Varje Ready-To-Cut(tm) fungerar med vilken Performax slipmaskin som helst - hitta helt enkelt färgen som motsvarar din trumma och klipp längs linjen. Du sparar tid och pengar med Ready-To-Cut(tm), eftersom den garanterat inte har några brott, inga skarvar och inga sömmar, bara perfekt passande remsor varje gång! Ger 19 omslag på en 16 tums trumma; 12 på en 25 tum; 14 på en 22 tum och 8 wraps på en 37 tum trumma.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0696738209374

Kategorier El & handverktyg, Elverktyg & Tillbehör, Elektriska efterbehandlingsverktyg Delar & Tillbehör, Powerslipardelar & Tillbehör, Slipark,

JET Red Assurance-garanti: Uppbackad av JET:s branschledande 90-dagarsgaranti. Kvalitetstillverkning: Stolt tillverkad i USA. Förmärkt för skärning: Ger 19 omslag på en 16-tums trumma; 12 på en 25-tums; 14 på en 22-tums; och 8 på en 37-tums. Fint slipmedel: 180-korn aluminiumoxid omslag. Kompatibilitet: Designad för att passa JET och Performax trumslipmaskiner.

Backing Type	Cloth
Backing Type	‎Cloth
Batteries Required?	‎No
Brand	Jet
Brand	‎Jet
Color	Red
Color	‎Red
Compatible Devices	‎Drum Sander
Compatible Material	‎Wood
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 5 ratings 4.2 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Grit Material	‎Ceramic Alumina
Grit Number	‎180
Grit Type	Fine
Grit Type	‎Fine
Included Components	‎Ready-To-Cut Sandpaper
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎60-9180
Item Package Quantity	‎1
Item Weight	‎4.19 pounds
Manufacturer	‎Performax
Material	‎Aluminum Oxide
Part Number	‎60-9180
Product Dimensions	12"L x 12"W
Product Dimensions	‎11.6 x 12.2 x 4.2 inches
Product Dimensions	‎12"L x 12"W
Unit Count	‎1.0 Count
Warranty Description	‎90 Day

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Rojo

It works

It is sanding paper, it works, markings are accurate

Scritto da: J. Mikkelson

Effective, but burns on some woods

I couldn't believe that there were still no reviews on this item, which I have been using in my one-man shop for several years now on a Performax 16-32. Overall, it's a great option. Cutting is straightforward, using the color-coded lines for your particular drum, though I think there is a dark green line that can be easy to mistake for the black one, which is "my" line. The main problem I have with this is its tendency to develop "hot spots" -- especially on woods such as cherry, with its pitch pockets -- and then proceed to leave a burn line the length of the board as the burn problem snowballs. Once the paper burns, that's it for that spot. You can scrape/chip the burned resin off the drum, but I still mark the spot in pencil on my sander so I don't send something across that spot again. Since I do a lot of rail/stile kind of widths, I can get away with that, but if you were going to use it for lots of wide panels, it could be a different problem entirely. The only remedy I have found, and it's not 100%, is to take *extremely* light passes at a fairly high feed rate. In practice, the paper produces a near-finish quality on woods like mahogany and oak, which can hide finish imperfections fairly well. On maple, walnut, and cherry, particularly dense areas around knots, etc., it leaves very visible straight line scratches that take a good bit of RO sanding at 150-180-220, or a good cabinet scraper, to remove. (If you use a scraper after using this, I would hit the surface with RO at 180 or 220 briefly, and blow or vacuum off the dust, or the residual abrasives from this paper will dull the burr on your scraper in a hurry!) I still think this is a better solution than going to the RO sander straight from the planer, but it can be a board-to-board thing. A side benefit of this kind of abrasive is that, once I need to pull the old one off my sander, it is easy to tear the less worn sections into hand-held size pieces (I usually go about 5" long, and the roll is about 3.5" wide) and use for hand sanding, especially profiles, where the stiffness of the resin/fabric backing is a plus. You can generate some serious heat in a hurry this way, though, so go easy, or wrap your thumb / fingers -- it really is that hot. Overall, a good bet, and it will last you a long time. I'm just finishing my first roll after several years and many, many hundreds of BF through it.