POWERTEC 11240 4,5 tums sliphylsor för spindelslipmaskin i 6 storlekar med olika korn 80, 120, 240

Name: POWERTEC 11240 4,5 tums sliphylsor för spindelslipmaskin i 6 storlekar med olika korn 80, 120, 240
Brand: POWERTEC
SKU: 0843441105749
Price: 48.96 EUR
Availability: InStock

Brand:POWERTEC

3.7/5

€
48.96

Vi presenterar 4,5 tums sortiment av sliphylsor från POWERTEC. Dessa spindelsliphylsor är designade för att ge dina ytor den perfekta finishen de förtjänar. Vanligtvis används för slipning och polering av kurvor, materialborttagning och ytbeläggning, dessa sliptillbehör fungerar effektivt på en mängd olika icke-järnmetallbaserade och träbearbetningsprojekt. Dessa högpresterande sliphylsor är tillverkade av aluminiumoxid och har en fibrer av överlägsen kvalitet som ger precision och professionella kvalitetsresultat. Detta kostnadseffektiva kombinationspaket innehåller 4-1/2-tums sandpapperssliphylsor i 6 storlekar och i tre olika korn för att säkerställa att du har exakt det du behöver för perfekt hantverk inom träbearbetning. KOMPATIBILITET För användning med de flesta oscillerande och spindelslipmaskiner. För bästa resultat och varumärkesspecifik matchning, sök på Amazon efter POWERTEC MODELL OS1400 & OS1000 i 6 olika diametrar: 1/2 tum 3/4 tum 1 tum 1-1/2 tum 2 tum 3 tum Blandade korn: 80 grit sleeves120 grit sleeves240 grit sleeves POWERTEC är en professionell tillverkare av högkvalitativa träbearbetningsmaskiner, träbearbetningstillbehör och ett brett sortiment av OEM reservdelar. Vi är fast beslutna att överträffa förväntningarna, samtidigt som vi tar med de bästa innovationerna, teknologierna och produktutvecklingen till branschen.

Inga enheter tillgängliga

EAN: 0843441105749

Kategorier El & handverktyg, Elverktyg & Tillbehör, Elektriska efterbehandlingsverktyg Delar & Tillbehör, Powerslipardelar & Tillbehör, Sliphylsor,

KOMPATIBILITET: Fungerar med oscillerande spindelslipmaskiner, inklusive modeller från POWERTEC (artikelnummer OS1400, OS1000), Delta, Grizzly, Jet, Ryobi och Wen. Gjord för att hålla: Varje sliphylsa är noggrant konstruerad av premium aluminiumoxid för att öka livslängden och förhindra belastning. PROFESSIONELL AVSLUTNING: Perfekt oscillerande slipmaskiner för träbearbetningsprojekt och används för att slipa, ytbehandla, slipa och polera vissa metaller och de flesta mjuka och hårda träslag. PERFEKT PASSFORM: Dessa 4 ½ tum långa spindelsliphylsor passar direkt över gummisliptrummans metallskaft. INKLUDERAR: Professionell aluminiumoxidsliphylsor i 3 korn (80, 120, 240) och sex storlekar (1/2, 3/4, 1, 1-1/2, 2 och 3) – Paket med 18.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	POWERTEC
Brand	‎POWERTEC
Compatible Material	Aluminum, Metal, Rubber
Compatible Material	‎Aluminum, Metal, Rubber
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 500 ratings 4.6 out of 5 stars
Grit Material	Aluminum Oxide
Grit Material	‎Aluminum Oxide
Grit Number	‎80
Included Components	‎4.5 Inch Sanding Sleeves for Spindle Sander in 6 Sizes with Assorted Grits 80, 120, 240 \| Aluminum Oxide Sandpaper Sanding Sleeve Assortment in Dia. 1/2, 3/4, 1, 1-1/2, 2 & 3-18 PK
Item Dimensions LxWxH	9 x 4.7 x 3.5 inches
Item Dimensions LxWxH	‎9 x 4.7 x 3.5 inches
Item model number	‎11240
Item Package Quantity	‎1
Item Weight	‎9.9 ounces
Manufacturer	‎POWERTEC
Material	Aluminum Oxide
Material	‎Aluminum Oxide
Part Number	‎11240
Pattern	‎18 PK 2
Product Dimensions	‎9 x 4.7 x 3.5 inches
Style	‎Assorted sanding sleeves 18pk

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Edward

They remove material in a controlled manner!

These are pretty darn great spindle sander sleeves. The grits seem accurate and comparable to other brands. A month of burning through pine and poplar making reindeer models and they are holding up and wearing down as expected. Durability and longevity are not an issue. The backer does not have a seam that will affect the workpiece or sanding in any way and is made of a very durable material that doesn't show signs of ripping. That said, flip your sleeves/barrels every few uses for good measure and to reduce wear on your rubber spindles. These are currently in a drawer under a WEN sander. The same generic white-label machine that is sold by Ryobi, Powertec, Grizzly, RIKON, PowerMax, Triton, Wood River, Shop Fox, Central Machinery, and countless others. They are all the same identical sander other than the label and paint job. These will work great on all of them. The height/length and diameter of the set are all up to par. As far as sandpaper and workshop consumables go, these are a fantastic choice.

Scritto da: FL-Eagle

Fantastic

Have been looking for sanding sleeves that go to at least 240 grit and was delighted when I came across these. Was a bit leery at first but was pleasantly surprised. The sleeves fit the rollers perfectly and performed well. They clean well after use and being able to sand to 240 grit cuts down on hand sanding. Removing the sleeves from the rollers was also fairly easy in swapping out grits which was nice. I would recommend and will certainly buy again when they need replacing.

Scritto da: Cat

Husband is happy

My husband wanted me to order these for his Craftsman Spindle Sander. He hates to order things on the Internet without seeing them first. He was so happy, these work perfectly! In the rate features I can't answer to longevity because he just installed them last week. As for 'sheerness' - I'm not exactly sure what that means. These fit perfect for his sander.

Scritto da: Travis

Excellent Rubber Drums

I purchased these for my Nxtul spindle sander and sanding sleeves. (I will include links below). These drums are very rigid. I was worried they would be some kind of soft rubber or undersized but had no problem. Even at 9°F(woodworking in Minnesota) I could clamp them to the point they would hold the sanding sleeves perfectly without slippage. Sanding Spindle https://www.amazon.com/gp/product/B08LDRG8DW/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Sanding Sleeves https://www.amazon.com/gp/product/B0756RDQC1/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Scritto da: W. Chilson

No box, just plastic bag

Sanding sleeves work well. But these sleeves came in a plastic bag. I also bought another brand, also sold on Amazon, that works just as well, but comes in a box. I like the box better since it is easier to store.

Scritto da: cruciantime

Sloppy manufacturer packaging

They came in a bag. They bang together and get bent up. Boxing them like other sanding belts or discs would save them.

Scritto da: Amazon Customer

works as advertised

the first thing i did was see if i wasted my money. I took a piece of dried oak and started sanding. It worked great. It not only sanded the piece of very hard oak smooth, it didnt seem to loose its cutting ability as quickly as you would have expected. All in all it did a very nice job of sanding and still going strong. I recomend it and I will buy again when needed.

Scritto da: Patrick K.

Fits Harbour Freight oscillating spindle sander

Bought these to replace the ones on my Harbor Freight oscillating spindle sander. HINT: Powertec's Oscillating spindle sander is the exact same as the Harbour Freight. Been working great so far.

Scritto da: Brenda Greencorn

Good Fit

Fit my Craftsman oscillating spindle sander purchased many years ago. Was happy to find them as Sears is no longer in business in Canada and Craftsman does not carry any accessories for older tools.

Scritto da: Daniel Chatel

Très long pour la livraison

Bon produit par contre