Reach Barrier 3016 Vattenvärmare Isoleringssats

Name: Reach Barrier 3016 Vattenvärmare Isoleringssats
Brand: Reach Barrier
SKU: 0785577135255
Price: 105.55 EUR
Availability: InStock

Brand:Reach Barrier

3.3/5

€
105.55

PRODUKTBESKRIVNING Reach Barrier 3016 Vattenvärmare Isoleringssats. FRÅN TILLVERKAREN Reach Barrier 3016 Single Reflective Air Water Heater Insulation Kit håller vattnet i tanken varmare under en längre tid och passar de flesta storlekar av varmvattenberedare. Detta kommer att spara pengar eftersom vattenuppvärmning kan stå för 14 till 25 procent av den energi som förbrukas i ett hem. Att lägga till isolering till en varmvattenberedare kan minska standbyvärmeförlusterna med 25 till 45 procent. Varje varmvattenberedare som är varm att ta på kan dra nytta av ett isoleringssats. Reach Barrier 3016 Single Reflective Air Water Heater Insulation Kit innehåller (1) 24-tums gånger 192-tums rulle med Reach Barrier Single Reflective Air™ vattenvärmare, supertemperaturbeständig tejp och lätt att följa instruktionsguide. Reach Barriers reflekterande isoleringsprodukter är en av de mest mångsidiga och energieffektiva isoleringsprodukterna som finns. Strålande (reflekterande) barriärer installeras på vindar, väggar, takterrasser och golv. De flesta nybyggda bostäder innehåller strålningsbarriärisolering på grund av den bevisade effektiviteten för att minska energianvändning och kostnad genom att minska sommarvärmevinsten och vintervärmeförlust. Att installera en strålbarriär kan vara den lägsta kostnadsförbättringen som kan ge den största totala minskningen av energianvändning och kostnader. Single Reflective Air uppfyller ASTM-standarder och överensstämmer med Building Code.

Inga enheter tillgängliga

EAN: 0785577135255

Kategorier Verkyg & hemförbättring, Byggnadsmaterial, HVAC, Väderskydd, Rörbeläggningar,

Satsen innehåller: 1 räckviddsbarriär(Tm) Bubble Isolering Vattenvärmarskydd som passar de flesta storlekar av varmvattenberedare, supertemperaturbeständig tejp och lätt att följa instruktionsguide. Lätt att använda och installera förskuren panel Kräver inga skyddskläder eller specialverktyg vid installation. Överskrider nya brandkoder och kräver inget underhåll. Isolering inkluderar 2 lager av 5/32-tums barriärbubbla laminerat mellan 2 lager reflekterande polyeten, vilket hjälper till att leverera mer konsekventa R-värden. Reach Barrier(Tm) reflekterande isolering och bubbelbarriärteknik blockerar upp till 95 procent av strålningsvärmen vilket hjälper till att spara energi och pengar.

Batteries Required?	‎No
Country of Origin	‎China
Customer Reviews	4.3 4.3 out of 5 stars 177 ratings 4.3 out of 5 stars
Item model number	‎3016
Item Package Quantity	‎1
Item Weight	‎2.2 pounds
Manufacturer	‎Reach Barrier
Part Number	‎3016
Power Source	‎Corded electric
Product Dimensions	‎25.1 x 8.4 x 6.6 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: SLady

Terrific!

This product is easy to work with. Covered my entire hot water heater. Good purchase.

Scritto da: Todd H.

Easier to install than expected

My gas water heater is in an unheated space, so I bought this kit to help with heat loss. This insulation kit was less expensive than other kits available, I assumed this would be because the wrap material was thinner. It was slightly thinner than other insulation wrap I previously used. I had some thicker wrap left from another project, enough to make a "disk" for the top of the heater, rather than fold over the edges of the top layer of the material per the instructions. This allowed me to used the 24" roll hight to make two wraps around the heater and finish with the bottom just above the air vents. The material itself went on easily. It stayed in place as I taped it on, making my cuts a around the various items as I went. This was a challenging installation as I only have access to the heater on two sides. The material was flexible enough to get around obstructions, but stayed in place once attached with the included tape. There seems to plenty of material to completely cover a standard size heater. I did run out of tape just as I finished, but did use extra tape around the earthquake strapping, so I believe there is also enough tape for most applications.

Scritto da: George E.

Quick And Easy

Way better fit (50Gal) than the usual blanket type…That an no Fiberglas issues! I like it…

Scritto da: D. R. Sauerzopf

Plenty of product to wrap a 40/50 gallon tank. No messy fiberglass. Installed on an electric heater

Just put in a new 40 gallon hot water heater. Used this wrap today. Had plenty of material to cover the tank with plenty of over wrap. The tape you get is fair. As long as everything is clean it should stick and hold. We shall see. I keep my basement around 72. Once I put the wrap on completely. I could feel heat coming off the top of the water heater. I did do the pizza cutting process for the top as recommended and I think some additional insulation would help on the top side since heat rises. All I used was scissors, utility knife, and a tape measure.

Scritto da: dokdmento

It’s better than the deteriorated insulation that I had but, the insulation is warm to the touch, so how good can it be? It was easy to install and not that expensive so…..

Scritto da: Aaron

Make sure you take the time to do it right (UPDATE: and buy different tape)

Break out your scissors and measuring tape, you are in for a crafting project. It does take some patience and precision to install correctly, but the end result is good. Allocate 1/2 hour for the installation. The product comes with ample insulation to cover a hot water heater (I had some left over). The silver tape roll that comes with the product was sticky enough to hold the insulation but wasn't quite long enough to do the full job. Overall, if you are the type who doesn’t mind spending the time to do something right, you’ll probably like this product. UPDATE: After being installed 2 weeks I notice that the silver tape is coming undone anywhere there is a corner or a fold. The tape just isn't made to last the test of time. I'll be looking to order some different tape to re-do the areas the tape is coming un-stuck.

Scritto da: Simon Elash

Keeps water heater warm

Could tell a difference immediately in as much as water heater kicking on. Takes a little time to install as you will need tape measure, some type of marker and scissors. Pretty easy to install just measure and take your time when taping and press tape to get good adhesion.

Scritto da: B. Callahan

Seems ok. A little thin

Another "get what you pay for" situation. It was easy enough to trim and tape onto the heater. But the material is thin and you can feel heat through it. It must be better than nothing, though. I hate fiberglass but I would get it if it was the only step up from this one.