SharkBite 1/2 tum Crimp Tee, paket med 10, VVS-koppling i mässing, PEX-rör, PE-RT, UC362LFA10

Brand:SharkBite

3.8/5

55.43

SPECIFIKATIONER: SharkBite mässingsbeslag har en lägsta arbetstemperatur på 33 grader F vid 160 PSI och en maximal arbetstemperatur på 200 grader F vid 80 PSI. FÖREDRAS AV PROFFS: SharkBite-verktyg och tillbehör uppfyller samma höga standarder för VVS-applikationer för kommersiella och bostäder, som kombinerar hållbarhet och användarvänlighet; certifierad för användning i dricksvatten och vattenbaserade värmesystem. HÅLLBAR OCH HÖG KVALITET: Dessa crimp-tee-kontakter är gjorda av blyfri DZR-mässing för långvarig tillförlitlighet; korrosionsfri och utan avlagringar. KOMPATIBILITET: T-shirts i mässing fungerar bra med PEX- och PE-RT-rör. SHARKBITE MÄSSING CRIMP TEE: Denna SharkBite mässing crimp T-koppling är en fullflödeskoppling som används för att göra en anslutning mellan två PEX-rör av samma storlekar med kopparkrympringar eller klämmor av rostfritt stål.

SPECIFIKATIONER: SharkBite mässingsbeslag har en lägsta arbetstemperatur på 33 grader F vid 160 PSI och en maximal arbetstemperatur på 200 grader F vid 80 PSI. FÖREDRAS AV PROFFS: SharkBite-verktyg och tillbehör uppfyller samma höga standarder för VVS-applikationer för kommersiella och bostäder, som kombinerar hållbarhet och användarvänlighet; certifierad för användning i dricksvatten och vattenbaserade värmesystem. HÅLLBAR OCH HÖG KVALITET: Dessa crimp-tee-kontakter är gjorda av blyfri DZR-mässing för långvarig tillförlitlighet; korrosionsfri och utan avlagringar. KOMPATIBILITET: T-shirts i mässing fungerar bra med PEX- och PE-RT-rör. SHARKBITE MÄSSING CRIMP TEE: Denna SharkBite mässing crimp T-koppling är en fullflödeskoppling som används för att göra en anslutning mellan två PEX-rör av samma storlekar med kopparkrympringar eller klämmor av rostfritt stål.
Brand SharkBite
Color Brass
Connector Type Tee
Exterior Finish Brass
Item Dimensions LxWxH 0.56 x 4.88 x 8 inches
Item Weight 0.05 Pounds
Material Made from premium lead-free DZR EcoBrass.
Number Of Pieces 10
Size 1
Thread Type DZR

3.8

13 Review
5 Star
86
4 Star
9
3 Star
3
2 Star
1
1 Star
1

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: Copper
It's definetly a half inch pex tee
It is what it says it is, a brass half inch tee fitting. holds well and doesn't leak. I'm not sure what else you want to know about when reading a review on a plumbing connector. I used it to add hot and cold water lines for a bidet, so far it's worked fine without any problems.
Scritto da: Gail Holleron
Seals tight
Worked perfect. Tubing slid on with ease and sealed tight.
Scritto da: Ray White
Know what you are doing! Not like me!
I guess you better know what you are doing with this tee. Mine leaked. So I guess I didn't know what I was doing. The attached pic shows my application. I still don't know why it leaked. Everything looked good to me. I used a good SharkBite clamp, and the proper tool. The plastic pipe clamped down real nice on the tee barbs. It was very tight. It looked perfect to me. It still does. But... it leaked. So, I switched to SharkBite U362LFA tee connector instead. That worked fine. No leaks.
Scritto da: gweedo
works great
if you got a big job best go with the pack of ten used the tee and elbows no issues
Scritto da: Glocktard
shark bite quality.
brand name and at a great price compared to the big box store. i tested one of these and a shark bite ring clamp using a Iwiss clamp tool and it passed the no go test. the wife even crimped it and said that was easy! i wanted to have this as an emergency parts kit in case i get a water leak because our house is completely Pex.
Scritto da: ray phillips
if your are mechanical inclined these are easy to use
good product for diy projects but are a little to expensive
Scritto da: Ra
This worked fine but I went with the Sharkbite fitting for my 3rd faucet.
This tee worked fine. I used the clamp system, as opposed to the crimp system. I did not buy the special tool, I made it work with standard tools. I decided to add a 3rd hose bib and I decided to try the same Sharkbite fitting that all my faucets have. No clamps needed. Just insert the pipe very firmly. https://amzn.to/2BRdQkL . The end of the pipe must be cut precisely flush for this to work properly. I like it.
Scritto da: Amazon Customer
works fine easy install
works well
Scritto da: Sam
Too small without clamps
I was upset to realize these are not meant to be tight with just the barbs. Luckily a tight wrapping of electrical-tape widened it enough to use as I intended.
Scritto da: Amazon Customer
Did the job
Did the job
Scritto da: Gerard F. Pilon
ok
good price from the outlet store
Scritto da: isaak bergen
I love it
Good stuff
Scritto da: Amazon Customer
Works good
Works good

Relaterade produkter

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array