SharkBite 3/4 x 3/4 tums kulventil med FNPT-koppling, Push to Connect VVS-koppling i mässing, PEX-rör, koppar, CPVC, PE-RT, HDPE, 22186-0000LF 3/4 tum x 3/4 tum.

Name: SharkBite 3/4 x 3/4 tums kulventil med FNPT-koppling, Push to Connect VVS-koppling i mässing, PEX-rör, koppar, CPVC, PE-RT, HDPE, 22186-0000LF 3/4 tum x 3/4 tum.
Brand: SharkBite
SKU: 0697285466302
Price: 58.76 EUR
Availability: InStock

Brand:SharkBite

3.8/5

€
58.76

PRODUKTBESKRIVNING Förenkla dina VVS-projekt med SharkBite tryckkulventil i mässing med FNPT-adapter. Denna kulventil är idealisk för arbete i trånga utrymmen och låter dig snabbt och enkelt gå över från en FNPT-gängad ände till alla kompatibla rör. Denna VVS-armatur i mässing har en intuitiv design som kan installeras i våta linjer. Dessa tryckkulventiler i mässing är enkla att installera, kompatibla med PEX, PE-RT, CPVC, SDR-9 HDPE och kopparrörfixturer och kräver inga specialverktyg, lim, krympning eller lödning för installation. Dessa honkulventiler är lämpliga för kommersiella reparationer eller hemförbättringsprojekt. Denna VVS-ventil tål 200 grader F och 200 PSI. FRÅN TILLVERKAREN SharkBite 22186-0000LF Kulventil med inbyggda SharkBite-kontakter 3/4-tum x 3/4-tum FNPT Full Port Mässing Blyfri

Belopp

Lägg till i kundvagn Köp nu

EAN: 0697285466302

Kategorier Industri & vetenskap, Hydraulik, Pneumatik & VVS, Fittings, ventiler, Kulventiler,

SPECIFIKATIONER: Denna VVS-ventil med FNPT-kontakt klarar 200 grader F och 200 PSI. FÖREDRAS AV PROFFS: SharkBite-verktyg och tillbehör uppfyller samma höga standarder för VVS-applikationer för kommersiella och bostäder, och kombinerar hållbarhet och användarvänlighet. LÄTT ATT INSTALLERA: Denna intuitiva SharkBite mässing tryckhona kulventil möjliggör snabb och enkel installation, utan verktyg, krympning, lim eller lödning krävs; kan installeras i våta linjer; ta bort med en frånkopplingsklämma eller koppla loss tång. MÅNGSIDIG: Pushfit-honkulventiler fungerar bra med PEX-, CPVC-, PE-RT-, SDR-9 HDPE- och kopparrör. SHARKBITE KULVENTIL MED FNPT-KONTAKT: Denna kulventil med en invändig gängad anslutning gör att du kan övergå från en FNPT-gängad ände till alla kompatibla rör; idealisk för arbete i trånga utrymmen.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Color	‎Tan
Customer Reviews	4.8 4.8 out of 5 stars 279 ratings 4.8 out of 5 stars
Exterior Finish	Copper,Plastic,Brass
Exterior Finish	‎Copper,Plastic,Brass
Finish	‎DZR Lead Free Brass
Included Components	‎Ball Valve
Inlet Connection Type	National Pipe Tapered
Inlet Connection Type	‎National Pipe Tapered
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6 x 3 x 6 inches
Item Dimensions LxWxH	‎6 x 3 x 6 inches
Item model number	‎22186-0000LF
Item Package Quantity	‎1
Item Weight	‎9.9 ounces
Manufacturer	‎Cash Acme
Material	Brass
Material	‎Brass
Number of Ports	1
Number of Ports	‎1
Outlet Connection Type	PEX
Outlet Connection Type	‎PEX
Part Number	‎22186-0000LF
Product Dimensions	‎6 x 3 x 6 inches
Size	‎3/4 in. x 3/4 in.
Style	‎FNPT
Usage	‎Used to shut-off water flow for servicing and making repairs. Transition between PEX, copper, CPVC, PE-RT or HDPE pipe to an FNPT threaded connection.
Valve Type	Shut-off
Valve Type	‎Shut-off
Warranty Description	‎Limited 2 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Amazon Customer

Excellent!

I bought this for the low drain on my RV. Super easy to install and worked perfectly. Would definitely buy again.

Scritto da: Benjamin Nemec

Good product.

Works well. Takes a bit of effort to release the pex line. Been nice to close the valve and remove pex to flush the line.

Scritto da: SM Frerichs

Ease of installation

I had mistakenly believed it was 3/4” pex fittings on both ends but it needs another male end and pex connection. Otherwise, this is very easy to install. I will use pipe thread to connect the brass ends and it will work great. Shark bite makes plumbing easy.

Scritto da: Lefty

Sharkbite always great quality.

It's a sharkbite. Not much more needs to be said. It's the original pushfit connector design and the best quality in my opinion. It's the only brand I use and I've never had a problem with them.

Scritto da: Howard Rankin

Great valve

SharkBite fittings are the way to go. They work very well on copper and plastic pipe if you smooth the edges. I have never had one leak.

Scritto da: Rivian

Nice quality

Very easy to use and very good quality. Lead-free and OK for potable water. I use it as a shut off for my whole house filter. Works great. No leaks. Be sure to take out the plastic PEX reinforcement piece if you use PVC or copper. It serves no purpose other than to reinforce the pex tubing and actually cause flow problems and leaks.

Scritto da: Rolando Olivo

I bought this product 4 years ago It’s great

I like this product because it’s easy to install and easy to takeoff

Scritto da: K. C. Wood

I was amazed at how fast it went on with no leaks

Used this to connect to 3/4 copper main line coming from house to 3/4 inch threaded PVC running to irrigation system. I hadn't used SharkBite before, but didn't want to pay a handyman to sweat/solder a single fitting. I was amazed at how fast it went on with no leaks. I will buy other shark bite fittings If i need to do more plumbing work.

Scritto da: Cap10

Multifunction Headache saver!

I used this to install a new outdoor sill cock tap. Shark bite fitting pushes right on copper pipe (or Pex) without soldering and swivels like a union coupling. Threated valve end, screws right on to a sill cock. Valve can be used for a winter shutoff or future valve maintenance. Game changer.