SP Ableware Cane Valet Cane Holder (703240050)

Name: SP Ableware Cane Valet Cane Holder (703240050)
Brand: SP Ableware
SKU: 0742645010715
Price: 42.68 EUR
Availability: InStock

Brand:SP Ableware

1.5/5

€
42.68

Denna käpphållare används för att hänga eller kila fast en käpp, och är en liten plastbeslag som monteras på käppen för att hålla den på en bordskant när den inte används. Hållaren snäpper fast på käppen och glider upp eller ner för att komma i kontakt med toppen eller botten av bordet, och är mångsidig för användning i par för att komma i kontakt med både bordsskiva och botten. Ett litet gummiband kan placeras runt ändkrokarna för att bibehålla ett bättre grepp om käppskaftet. Hållaren mäter 8,5 x 4,0 x 1,0 tum (L x B x H). (L är längd, det horisontella avståndet från vänster till höger; W är bredd, det horisontella avståndet från fram till bak; H är höjd, det vertikala avståndet från lägsta till högsta punkten.) Ableware är specialiserat på hemsjukvård och rehabiliteringsprodukter för senior-, handikapp- och rehabmarknader. Vi har erkänts som den största tillverkaren i USA av Aids for Daily Living (ADL). Ableware fortsätter att designa och tillverka produkter som ökar rörligheten, maximerar självständigheten och gör det möjligt för människor att leva mer givande, värdiga och berikade liv.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0742645010715

Kategorier Medicinsk utrustning, Hjälpmedel för rörlighet och dagligt liv, Rörlighetshjälpmedel & utrustning, Kranar, kryckor & tillbehör, Kantillbehör, Kanister,

Mångsidig för användning i par för att komma i kontakt med både bordsskiva och botten. Snäpps fast på käppen och glider upp eller ner för att komma i kontakt med toppen eller botten av bordet. Liten plastbeslag för montering på käpp för att hålla den på bordskanten när den inte används. Litet gummiband kan placeras runt ändkrokar för att bibehålla bättre grepp på käppskaftet. Hållare för att hänga eller kila fast en käpp.

Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item model number	703240050
Manufacturer	MADJI
Product Dimensions	2 x 2 x 0.75 inches; 0.8 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: D.J.

Spend Most Of Your Time Worrying About It Falling

'Barely' worked. Surprisingly (to me anyway), every table/desk I tested this on had a beveled edge. This product does not do well with beveled edges because this product has to reach so far to get past the beveled part to get to the actual 'top' of the table that only a very small part of this product is actually touching the top of the table. So this makes the cane swing very far under the table, which means the cane is at about a 45 degree angle, which means that this product is at about a 45 degree angle and therefore VERY close to slipping off the table. My dad and I had to place it absolutely perfectly on the table so there would be no swinging at all when we let go, otherwise it would slide off. And even when it didn't slide off, it sure acted like it was ready to slide off at any minute. The material wasn't a grippy, rubber type material like would be expected either. It was actually fairly smooth (which increases slipperiness). This was very surprising. There were two of these slats included in the package and they suggested trying one slat above the table and one below, that was supposed to hold it a bit tighter by kind of gripping the table. Well two problems with that... 1) Different tables have different thicknesses so you'd have to adjust one of the slats when you sit at different tables, and 2) When I tried this, it didn't help. If the slats were a bit longer, or they put rubber grippers under the slats, or it was made out of a rubber-like material, it'd probably work better. But my experience was that my dad would spend more time worrying about it falling on the floor than he would spend finding a place to prop his cane up in the first place. Can not recommend it.

Scritto da: DK

There are two in the package.

I bought two because the description says "The holder" (singular) and the reviews say you need a pair. There are two in the package so now I am stuck with an extra pair. I will update the review after I see how they work.

Scritto da: BettyL

Tabling your Cane

This product works fairly well; however, you really need TWO! You leave space between the two--as shown on the product page; this clamps between the top and bottom layer of a table & is adjustable as to thickness.

Scritto da: Carl Franklin, JD/PhD

Good for those who use a cane or walking stick.

Works just like the advertisement. I tried using a single rubber piece, and it worked okay most of the time. With two in place you get a lot better grip. I also use an aluminum walking stick that I purchased years ago when I would go hiking a lot. This piece has actually been very helpful for me on a hiking trail. I can put the walking stick on a nearby tree branch of other "flat" surface to keep from laying my instrument on the ground.

Scritto da: Brumby Mcgehee

Doesn't work

One half of it will often hold a cane on a counter if the flat side of it is down.

Scritto da: Steven Fuller

This is a terrible product it fell of the cane with in the ...

This is a terrible product it fell of the cane with in the first hour of use and was lost due to breaking

Scritto da: Bernie Saunders

The Cane Valet/Cane holder is a great thing. When you slide it on to the ...

The Cane Valet/Cane holder is a great thing. When you slide it on to the table it stay there or at a counter it will stay there, etc. Thank you.

Scritto da: AlliFlowers

Does not work

Does not work. Too short to put around a table and actually hold the cane immobile.