Torin AT830011LB Hydraulisk lågprofilerad aluminium och stål Racing golvjack med dubbelkolvs snabblyftspump, 3 ton (6 000 lb) kapacitet, svart

Name: Torin AT830011LB Hydraulisk lågprofilerad aluminium och stål Racing golvjack med dubbelkolvs snabblyftspump, 3 ton (6 000 lb) kapacitet, svart
Brand: Torin
SKU: 0615268833118
Price: 707.04 EUR
Availability: InStock

Brand:Torin

3.4/5

€
707.04

Torin AT830011LB racinggolvdomkraft kan användas för allmän eller specialanvändning och har en lastkapacitet på 3 ton (6 000 lb). Med ett lyftområde mellan 3-15/16 till 18-5/16 kan du få enkel åtkomst under lågprofilfordon. Den är konstruerad av hållbart, höghållfast aluminium och stål. Snabbpump med dubbla kolvar gör att du enkelt kan höja domkraften till önskad höjd. En skumstötfångare på handtaget hjälper till att skydda ditt fordon från skador. Utrustad med (2) stora stålhjul och (2) 360-graders svängbara hjul för smidig manövrerbarhet. Ett bekvämt sidohandtag gör den lätt att bära. När det gäller säkerhet kommer denna Torin servicedomkraft till och med med ett inbyggt säkerhetsöverbelastningssystem som förhindrar användning utöver lastkapaciteten.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0615268833118

Kategorier Automobiler, Verkyg och utrustning, Garage & verkstad, Vehicle Lifts, Hoists & Jacks, Jacklar, Golv Jacks,

Utrustad med (2) stora stålhjul och (2) 360-graders svängbara hjul för smidig manövrerbarhet; Bekvämt sidohandtag gör den lätt att bära. Lyftområde från 3-15/16 till 18-5/16 gör att du enkelt kan komma åt under lågprofilfordon. Tillverkad av hållbart, höghållfast aluminium och stål; Snabblyftpump med dubbla kolvar gör att du enkelt kan höja domkraften till önskad höjd. Racing golvdomkraft kan användas för allmän eller specialanvändning och har en lastkapacitet på 3 ton (6 000 lb); Skumstötfångare på handtaget hjälper till att skydda ditt fordon från skador.

Brand	Torin
Brand	‎Torin
Color	‎Black
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 42 ratings 4.4 out of 5 stars
Item Dimensions LxWxH	‎8 x 14 x 28 inches
Item model number	‎AT830011LB
Item Weight	‎61 Pounds
Load Capacity	3 tons
Load Capacity	‎3 tons
Manufacturer	‎Torin
Manufacturer Part Number	‎AT830011LB
Material	Alloy Steel, Aluminum
Material	‎Alloy Steel, Aluminum
Maximum Lifting Height	18.31 Inches
Maximum Lifting Height	‎18.31 Inches
Minimum Height	‎3.94 Inches
Model	‎Hydraulic Low Profile Aluminum Racing Floor Jack with Dual Piston Quick Lift Pump, 3 Ton
Product Dimensions	‎8 x 14 x 28 inches
Special Features	‎3 ton floor jack;
Style	‎3 Ton Al & Steel Floor Jack
Vehicle Service Type	Car
Vehicle Service Type	‎Car

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: scott

great prodect

like the jack . the handle should lock in but jack works great

Scritto da: Kenny C.

Works fantastic

I should have bought this 5 years ago . Very smooth operation and makes me feel safer.

Scritto da: Paula G. Cannon

Great jack, but not a lightweight

Nice jack, could be a little lower height, it’s not as low as my Costco low profile steel jack but only maybe 1/2” taller. I ordered this jack as opposed to the low profile version because it advertised aluminum. It’s every bit as heavy as my full steel jack I already had. Other than being heavy it is a little tall. For the average car fine but it will not go under my Gen 2 Cadillac CTSV for an oil change without driving it onto 2 2x12s to gain enough clearance to get the jack under the cross member. the pros are, Easily maneuvered Fast action (7 pumps to full extension) Well built Reliable brand Cons: Heavy Not “low profile” for a modern sports car All in all I would buy this jack for commuter car or up to a one ton truck, it’s a very sturdy, heavy, well made jack.

Scritto da: Hairy Potter

Very Pleased With This Jack

This is a great jack! I ordered it because my old one was not holding under load, so it was time for it to be replaced. There are many things that I like about this jack. I have had issues in the past with getting a jack positioned in the right spot because of interference. With its low profile, this one slips right into position without any problem. I also like how fast the jack extends. While I do not change race car tires, I appreciate not needing to work the handle any more than needed. From low to high, it only takes 6 full strokes of the handle. I assume that the dual piston design enables this quicker, and more powerful, jacking capability. The handle is long, which is good for reaching further under a vehicle. I noticed immediately that the casters rolled easily. The jack is not lightweight, and while I will not need to carry it, the two side handles should make carrying easier. One design feature that I would have liked to see with this jack is longer teeth on the lift saddle. Longer teeth are helpful in gripping onto axles and other chassis parts to prevent slipping when the jack needs to roll while being jacked. This feature is not enough to warrant a downgrade in my rating, but it does mean that I will need to be a bit more careful when jacking.

Scritto da: Nebti17

Heavy and heavy duty...

The media could not be loaded. Torin is an established American manufacturer of car lifts, jacks, jack stands, etc. This China-manufactured jack is solid and capable. It's the first semi-commercial floor jack I've ever owned, and now that I've lifted it out of its box, I'm kind of enamored of the cheapo floor jacks I've owned up until now. This jack weighs nearly seventy pounds. It's easily maneuvered, but not easily carried or lifted. The UPS guy was not happy with the weight, and the box was bashed to pieces. But the jack is solid and pristine. It takes more than a frustrated UPS driver to damage this beast. Three ton capacity. Some aluminum components, though not all. Dual lift cylinders. A two-part handle with a solid foam scratch guard on the lower portion. Six handle pumps lift jack to full twenty-inch extension. This is a quality tool of commercial weight and build. If you don't need something this heavy and strong, stick with the lesser two-ton capacity floor jacks you can get for $40. This is for serious lifting where speed counts and weights are significant. Yet even if you don't need the weight capacity of this jack, you might just want it for the extra six inches of lift it provides over the $40 home versions.

Scritto da: steve

Where’s the aluminum?

Paid for a Aluminum and Steel Floor Jack, And got this all steel jack Beware!!!

Scritto da: G. Hearn

Fast-and-easy. nice maneuverability. Like the handles.

This is certainly more of a "heavy-duty" jack than many others. it has a weight of just over sixty pounds. Easier to maneuver than others I've used. .. Especially with the side handles. Much faster to lift than what I have been using. Just a half-dozen pumps (at most) as opposed to pumping. . . and pumping. . .and pumping.

Scritto da: MrE

Nice Jack

These must be made by someone else and re-labelled since I have an Arcan brand that is almost identical -- just slightly different colors. They are a combo of aluminum and steel from what I understand, 6k weight, double cylinders. They are fairly light weight, wheels are nice and roll well without any rust yet. Really like the plate with the rubber/plastic insert on it, handle is nice and easy to use.