Yes4All Heavy Duty stål Väggmonterade paddelbrädeställ, surfbrädehängare med vadderat skum, förvara och display upp till 3 surfbrädor, snowboards, longboards, svart, 34,25 x 5,51 x 3,54 A. Surfbrädehållare i trä

Brand:Yes4All

3.6/5

71.86

Vårt namn är löftet om standard och kvalitet. Vi är så säkra på att du kommer att gilla vårt Surfboard Wall Rack, att om du returnerar det inom 30 dagar kommer vi att ge dig full återbetalning utan några frågor. Minimalistisk design: väggstället visar inte bara din surfbräda, utan förvarar den också på väggen. Därför tar de inte mycket plats, du kan visa tavlan även i ett litet rum. Det finns skruvar för både betong- och regelväggar. Mjuk pad ger bättre skydd: surfbrädehållarens pad har en mjuk känsla och ger komfort till din älskade bräda. De mjuka filtkuddarna skyddar brädan från att halka, darra, repa och falla av. Stabilt ställ för tuffa brädor: tillverkat av massivt akaciaträ, en robust struktur för tillförlitlighet och hållbarhet under din användning. Perfekt för att dekorera din plats: du kan ha din dyrbara tavla utställd istället för att lämna den någonstans i huset. Visa din kärlek och berättelse genom att göra din surfbräda till en del av ditt hem. Kompatibel med de flesta brädor: med en kapacitet på upp till 55lbs är Yes4All surfbräda väggställ lämplig för nästan alla surfbrädor. Dessutom är det också bra för att visa andra typer av brädor som paddleboard, wakeboard och snowboard, Skimboard.

Vårt namn är löftet om standard och kvalitet. Vi är så säkra på att du kommer att gilla vårt Surfboard Wall Rack, att om du returnerar det inom 30 dagar kommer vi att ge dig full återbetalning utan några frågor. Minimalistisk design: väggstället visar inte bara din surfbräda, utan förvarar den också på väggen. Därför tar de inte mycket plats, du kan visa tavlan även i ett litet rum. Det finns skruvar för både betong- och regelväggar. Mjuk pad ger bättre skydd: surfbrädehållarens pad har en mjuk känsla och ger komfort till din älskade bräda. De mjuka filtkuddarna skyddar brädan från att halka, darra, repa och falla av. Stabilt ställ för tuffa brädor: tillverkat av massivt akaciaträ, en robust struktur för tillförlitlighet och hållbarhet under din användning. Perfekt för att dekorera din plats: du kan ha din dyrbara tavla utställd istället för att lämna den någonstans i huset. Visa din kärlek och berättelse genom att göra din surfbräda till en del av ditt hem. Kompatibel med de flesta brädor: med en kapacitet på upp till 55lbs är Yes4All surfbräda väggställ lämplig för nästan alla surfbrädor. Dessutom är det också bra för att visa andra typer av brädor som paddleboard, wakeboard och snowboard, Skimboard.
Assembly Required No
Base Type Pedestal
Brand Yes4All
Color A. Wooden Surfboard Holder
Material Wood

3.6

13 Review
5 Star
77
4 Star
11
3 Star
3
2 Star
4
1 Star
6

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: C.
Easy to install into studs with given screws
The wood finish looks beautiful. Racks are able to hold my 9’4” boards comfortably. Drilled the given screws directly into my studs without a problem. The screws are very wide in size but sturdy. Packaged very well with care. This product cheaper than similar products on Amazon and has such great quality. Minor thing - the wooden circle inserts provided to cover the screw head requires sanding to shape it to fit. However this is not a problem at all since the screw heads are already covered by my boards and don’t stand out at all. I love this product and would buy this from seller again!
Scritto da: Captain Twinkie
Worthwhile purchase
This rack is just what we needed. It's sturdy and easy to install. No, it doesn't come with instructions, but that's because it doesn't need to. They provide all the tools you'll need and even include extra screws and drywall anchors if you need them. It's pretty self-explanatory: Decide where you want to hang it, put the screws through the holes, snap on the arms, and hang your boards. Done. The picture above shows you where to place it. My only complaint is that vertically the arms are a little too close together to accommodate fins. We have to stagger our boards so the board above doesn't rest on the fin of the board below it (see picture). That's not really a big deal, though. Overall, it's a worthwhile purchase and I recommend it.
Scritto da: Joshua Holder
Awesome and very useful
Saves space and makes it easy for us to load and unload. We have three boards and works great
Scritto da: Margaret R.
Mine was shipped with a bent arm - I don't see how to get a replacement
I have 3 boards but can only use the rack for 2 because one of the arms was defective. It is flattened at the top so won't slide over the peg it should fit on.
Scritto da: Canesrb
Does what it’s suppose to do!
The media could not be loaded. Love my wooden surfboard stand. It’s a great buy for the price and does what it’s suppose to do. Overall easy to install, I ended up using my own equipment bc I added butterfly screws.
Scritto da: Masterpeng
So far, so good
Easy installation. Comes with mounting stud screws, washers and flanged drywall screw anchors. I personally recommend screwing directly into the studs for a more secure mount. All you need is a drill, level(I used my phone app which worked well), measuring tape and a pencil. I have the mounts erected high and out of the way in my garage. It is supporting three SUP’s ranging from '11”6- “7’6, one longboard stacked and two body boards. Love it so far and frees up more space for my home gym. Mahalo!
Scritto da: Scott
Short Lifetime
Installed this on our lake dock. Easy to install. The upright is fine and still going strong. However the angled arms are not durable for large solid paddle board- 12 foot. The arms have sagged below horizontal now and the board can easily slide off. The arms under our other 2 boards are fairing a tad better but those are inflatable boards - 11.5 and 10.5. Another 6 months and those arms will likely be past horizontal too. Not good for wide boards (> 24 inches)
Scritto da: Trin
Easy & Look great
Super easy to hang up and they look very nice! Would def buy again
Scritto da: Guillaume Martin
Asking to Much $
Overall the desing is great and extremely easy to install. Only problem I have with this (we are still keeping it) is the build quality. The attachement holes on the frame did not all line up with one another and had to be drilled with a steel bit. The "pin attachements" for the arms are also not lining up strait at all (thankfully it is a tube and does the job) but it is apparent when you look at it. This product price should be re-evaluated and sold at around $40 to $50. At wich point the bang for buck value would make more sense and likley keep most customers happy with their purchase. thank you G.
Scritto da: My Buddy
Easy to install.
Used for the paddle boards. I would have liked a few more inches between layers to be able to leave the fins on the boards for storage. They can be staggered a bit however. Very happy with ease of installation.
Scritto da: Tyson Finley
Missing parts but great product.
Came with only 5/6 of the arms but works well!
Scritto da: Alyssa
Question Long Term Reliability
Construction materials could be stronger. The included hardware/anchors were not reliable.
Scritto da: Kim
Missing part
Arrived with one arm missing a pin, similar to other reviews.

Relaterade produkter

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array