Arnold (490-325-0012) ruohonleikkurin etupyörä, 15 tuuman yleissovitus, 15

Name: Arnold (490-325-0012) ruohonleikkurin etupyörä, 15 tuuman yleissovitus, 15
Brand: Arnold
SKU: 0037049944170
Price: 131.55 EUR
Availability: InStock

Brand:Arnold

3.5/5

€
131.55

Jos haluat ulkokäyttöön tarkoitettujen sähkölaitteiden kestävän pidempään ja toimivan enemmän, tarvitset Arnoldin osia, lisävarusteita ja lisälaitteita. Tarjoamalla sinulle laajan valikoiman vaivattomia, laadukkaita tuotteita, Arnold-osat pitävät kaikki laitteesi parhaassa mahdollisessa kunnossa. Yhteensopiva useiden suurten merkkien kanssa, yli 50 vuoden testattu suorituskyky on tuonut Arnoldille maineen huippuluokan tuoteinnovaatioiden ja laajan suunnitteluosaamisen ansiosta. Arnoldilla on perushuollosta suuriin innovaatioihin kaikki mitä tarvitset pitääksesi laitteet kunnossa kaudesta toiseen. Arnoldin avulla voit olla varma luotettavasta tuotteesta, jossa on tarkka istuvuus, muotoilu, materiaali ja rakenne. Luotettavien osien ja lisävarusteiden lisäksi Arnoldin helposti noudatettavat ohjeet ja lisävinkit helpottavat laitteesi huoltoa ja varmistavat, että saat työn suoritettua oikein.

Yksiköitä ei ole saatavilla

EAN: 0037049944170

Luokat Terassi, nurmikko ja puutarha, Ulkoilmatyökalut, Varaosat ja tarvikkeet, Ruohonleikkurin osat ja tarvikkeet, Nurmikonleikkurin varaosat Parts,

SISÄLTÖ: Sisältö sisältää yhden etupyörän vannekokoonpanolla ja halkaisijaltaan 3/4 tuuman akselit. Tarkemmat asennusohjeet löydät käyttöohjeesta. TÄYTÄ OIKEIN: Oikein täytetyt renkaat kestävät pidempään, tarjoavat paremman pidon ja auttavat tasaisessa leikkauksessa Vaihda rengas, jos siinä on vaurioita ja näkyvää renkaan kulumista tai jos rengas menettää ilmanpainetta. VAIHTAMINEN: Vaihda litteät tai kuluneet ruohonleikkurin pyörät joka kausi, jotta kone pysyy kunnossa. Nurmikkoa säästävä kulutuspinta tarjoaa erinomaisen pidon nurmikolla ja nurmikolla. MONIPUOLISUUS: Sopii useimpiin, mutta ei kaikkiin Ariens-, Craftsman-, Cub Cadet-, Husqvarna-, John Deere-, Poulan-, Poulan Pro-, Troy-Bilt- ja useimpiin nurmikkotraktoreihin, joissa on 15 x 6 tuuman etupyörä ja 3/4 tuuman akseli. Renkaassa on 300 lb.-kuormitus, nurmikkoa säästävä kulutuspinta, nylonlaakeri ja 2-kerroksinen luokitus. YHTEENSOPIVUUS: Universaali 15 tuumaa x 6 tuumaa etupyörän kokoonpano Troy-Bilt-, Craftsman- ja John Deere -ruohotraktoreille 3/4 tuuman akseleilla, korvaa M123810, GY20638, 634-05067. Yleisosa pyörille alkaen numeroista 532106108, 532122073, M123810, GY20638, 634-05067, 734-0731 ja 634-05066.

Brand	Arnold
Country of Origin	USA
Customer Reviews	4.5 4.5 out of 5 stars 1,485 ratings 4.5 out of 5 stars
Exterior Finish	Machined
Is Discontinued By Manufacturer	No
Item Diameter	15 Inches
Item Weight	7.85 Pounds
Manufacturer	Arnold
Material	Nylon
Product Dimensions	15 x 15 x 6.5 inches
Rim Size	15 Inches
Rim Width	6 Inches
Size	15"
Vehicle Service Type	Mower
Wheel Backspacing	3.5 Inches
Wheel Size	15 Inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: B R

Changed my life!!!

This tire changed my life. Previously, I’ve been dragging my riding lawnmower around with a rope. Then somebody pointed out I could put tires on it! I didn’t believe this to be so, but I ordered tires from Amazon and it was incredible! I highly recommend these tires.

Scritto da: mcg 79

Fit cub cadet lt1046

Seems like this was just what I needed

Scritto da: Philip Byrd

Easy to mount.

It was the right fit.Easy to mount.

Scritto da: CoolBoomer

Nice Wheels & Tires Took 10 Minutes to Change

These came with a set of bushings and a spacer for each wheel so that they fit the two common different size spindles. The bushings are some sort of man-made material (nylon?) and the inboard ones have a grease fitting built into them. Another review mentioned putting the grease fitting on the outboard side--*no way*--the directions show the fitting side facing the mower not the outside. You still need to put on your outer washers, C-clip and dust cap. These came pre-inflated and look like good tires, every bit as good as the ones that came on my Murray tractor. Why mess with getting the inner tubes replaced and all when you can just pop these out of the box, swap them and be done with it. Hope this review was helpful.

Scritto da: J. Fox

Look good, but not a fit for all mowers mentioned

The tire arrived fully inflated and looks good. The install was relatively painless. However, these wheels are not to OEM spec for my mower, a 2012 LTX 4200 Cub Cadet, even though the description stated they are. The original Cub Cadet wheels have a deeper cylinder for the grease fittings and bushings. The result with the new wheel is that it cannot hold the grease fitting in place for long, even after I've hammered it in with a rubber mallet and added the C-clip. The grease fitting will come out of the cylinder in the middle of the wheel after driving about 50 feet. The result after the grease fitting comes out is a constant, annoying swealing. It also does not stay inflated for a reason I have yet to discover. MAKE SURE THIS WHEEL IS AN EXACT MATCH TO YOUR MOWER AND OEM NUMBER.

Scritto da: Franky Lynn

Very good "high flotation" wheel and tire update.

Very good "high flotation" wheel and tire. I honestly think this wheel and tire combo is almost overbuilt for anything a person might use it for. The tire is big and soft, yet holds air indefinitely. I need something to hoist a standby motor generator that weighs over 200 pounds, as well as other heavy items, so I am building an all electric "mobile derrick" which will have a tiltable A-frame, a tiltable boom on top of that, and a winch with 1800 pound rated cable for lifting things. This "mobile derrick" will be using the three Arnold 15-inch Lawnmower wheels that I have purchased. The tires are big enough to give my "mobile derrick" the ability to traverse soft ground. This wheel/tire combo does not come with any ball bearings, just cheap plastic bushings, one of which has a grease zerk molded into it for pumping grease inside the wheel hub. The Arnold wheel/tire combo is very heavy duty and well built, so if your wheel uses 3/4" O.D. bearings and they are still serviceable, then this wheel will probably work. In my application mentioned above, I am going to permanently mount the wheel onto 3/4" axles, and the axles will rotate on pillow bearings.

Scritto da: MnW

bushings wear out too fast

the bushings wear out very fast on these but our local people stopped selling them. they're more expensive than they should be but install fairly easily.

Scritto da: Draco76123

Perfect fit

Just bought a used Craftsman YT3000. Previous owner replaced one of the wheels with one that was a little thinner and not fitting the axle well so it wiggled around alot. This was a near perfect replacement. It matched the original perfectly and fit snug on the axle with the included spacers. The axle inserts are plastic with built in plastic grease fitting, took me a minute to figure out it was a grease fitting since I've never seen a plastic one before, but I won't remove a star for it. It took me less than 5 minutes to swap it out with the old one. Only time will tell regarding durability, I'm guessing the axle inserts aren't going to last nearly as long as metal ones, but we'll see, it could surprise me.

Scritto da: Shawn R

Very Impressed!

Was pleasantly surprised that the tires on these were the same as the originals on my garden tractor., Carlisle Turf- Saver. These come with plastic bushings instead of the original metal ones, so I am a little concerned about their longevity, but we'll see what they look like after a full season. The outside diameter of the hub is smaller than the original, so my original dust covers were too big. I was able to make the old ones work, at least temporarily, but will probably have to get proper ones at some point.

Scritto da: MJB Ontario

Good Quality

Just need to check the axel size will not work on 5/8 inch axel and does not include an adapter for that size.

Scritto da: Rod

Works

cannot grease it and cannot install cap.

Scritto da: Cam

poor quality

These wheels have cheap plastic bushings instead of bearings. I don't recommend.