0
0

Celestron Wedge HD Prolla CPC:lle 8/9/11, musta (93664)

Brand:Celestron

3.6/5

914.07

Celestronin HD Pro Wedge on suunniteltu tukemaan haarukkaan asennettuja Schmidt Cassegrain -teleskooppejamme jopa 11:een asti. HD Pro Wedge tarjoaa raskaan ja vakaan alustan, joka sopii täydellisesti astrokuvaukseen ja takaa minimaalisen tärinän. Matala leveysaste 0-90° tekee tästä kiilasta toimivan päiväntasaajan käyttöön. Sisäänrakennetut ominaisuudet sisältävät korkeuden/atsimuutin säätimet, joihin on kiinnitetty ylimitoitettuja nuppeja napojen kohdistamisen helpottamiseksi, käsiohjaimen pidike, joka mahdollistaa asettamisen kiilan tai haarukan varteen, kallistuslevy kaukoputken asennuksen helpottamiseksi yksinkertaisesti kiertämällä kiila kiilaan ja suuri halkaisijaltaan 14 mm:n leveysasteen säätöruuvi lisää voimaa ja vakautta samalla, kun se vähentää tärinää ja helpottaa pyörimistä raskaan kaukoputken avulla. HD Pro Wedge - Yleiset ominaisuudet - Halkaisijaltaan 14 mm Latituden säätöruuvi - Lisää lujuutta ja vakautta. Ei taipu tai taipu, mikä vähentää tärinää ja helpottaa raskaan kaukoputken pyörittämistä. - 0-90° leveysaste - Matala leveysaste, täydellinen käytettäväksi päiväntasaajalla. - Sisäänrakennettu käsiohjaimen pidike - Antaa käyttäjän asettaa käsiohjaimen kiilan tai haarukan varteen. Käsiohjain ei putoa, kun haarukan varsi on kallistettuna maata kohti. - Kallistuslevy - Syvennykset, jotka sopivat teleskoopin pohjaan, ja kaukoputken pohja putoaa paikoilleen vain pyörittämällä. Teleskoopin kiinnittäminen kiilaan helpottuu. - Heavy Duty -sivulevyt - Jäykemmät ja enemmän materiaalia vähentävät tärinää kuvantamisen aikana.

Pakkauksen paino: 38,0 lb Alkuperämaa: Kiina. HD Pro Wedge tarjoaa raskaan ja vakaan alustan, joka sopii täydellisesti astrokuvaukseen ja jolla on minimaalista tärinää. Celestronin HD Pro Wedge on suunniteltu tukemaan haarukkaan asennettuja Schmidt Cassegrain -teleskooppejamme jopa 11:een asti.
Customer Reviews 4.6 4.6 out of 5 stars 42 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer No
Item model number 93664
Item Weight 38 pounds
Manufacturer Celestron Acquisition LLC
Product Dimensions 25 x 12 x 17 inches

3.6

10 Review
5 Star
78
4 Star
12
3 Star
5
2 Star
0
1 Star
4

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: Michael T. Conron
Installing and using the CPC HD Heavy Duty Wedge
Received the wedge in great shape two days after order placed. It requires minimal assembly with no problems and is ready for use in about 20 minutes. The wedgle is very well built and engineered to do exactly what it is supposed to do and that is, convert an Alt-Azimuth mounted telescope into a an equatorial mounted scope. The whole idea is to eliminate field rotation when doing long exposure imaging. The wedge is placed on the tripod head and attached by 3 cap screws and holds it securely. There are two possible orientations on the tripod head during install, one better than the other. The top of the Celestron tripod has a triangular face. You will want to place the wedge with one of the points of the triangle oriented toward the rear of the wedge. In that way, during the install on the tripod, the wedge will NOT fall off prior to inserting the 3 cap screws. The other orientation (with a flat side of the triangle oriented to the back of the wedge) will allow the wedge to fall off the head prior to seating it with the screws. Putting the C-11 scope on the wedge has different ergonomics than the placement of the scope in alt/azimuth mode, for sure. Initially somewhat difficult, you will quickly develop the right technique to do it and it becomes a non issue. The adjustments for alignment on the Pole star absolutely solid. Very good! Performance in equatorial mode is perfect! Love it. My first effort so far was a series of video images of Jupiter. The planet was low in the sky so resolutions were not optimal. In spite of that a series of decent 20 second video clips and a bit of massaging in Registax, yielded some detail. See attached. The wedgle works great. Fine product, heavy duty and solid, nicely engineered.
Scritto da: Steven Bassett
Put simply this is quality at its finest. Very heavy duty and will have no difficulty ...
Put simply this is quality at its finest. Very heavy duty and will have no difficulty handling a heavy CPC series telescope. I have mine supporting an eleven inch scope with no strain. Rock solid mount with plenty of room to adjust your scope to excellent alignment. It weighs in at about twenty five pounds. I find the added weight the only drawback. Of course if like me you have a son who is a big man and can easily lift the whole tripod/wedge/scope in one shot (125 pounds) All I need to do is watch as he moves it. If you want to get into astrophotography this wedge is absolutely necessary to have the scope track dead on. Get it!!
Scritto da: JonBeau
Comments on the Celestron CPC Heavy Duty Wedge 93664
Just as ordered. Very good and solid (read heavy as well). My only comment on setup of this item is that if this is your first time using a wedge take your time. It took me a little bit of time to fully comprehend the assembly and set up steps as the author of the instructions is more technically sophisticated than I. I visualize things a bit differently. A drawn step by step assembly pictorial would have been useful for this "ole boy". In reality, it shouldn't take more than 30 minutes to set up on your tripod.
Scritto da: St-Nick
Celestron quality as usual
I purchased this wedge because I believe in the quality of Celestron Telescopes and Accesories. This wedge is a great photographic asset if your a seasoned night sky photographer or beginner "like me" astrophotographer..this wedge is heavy and as the last reviewer said, you had better have a heavy weight tripod to handle it and your scope..I watched videos prior to the delivery and was able to put it together and mount with very little effort and also having a 8" Nexstar on a CPC tripod the weght wasnt an issue trying to mount the optics sideways to the tilted plate..This is a well made product and easy to set the Dec. and RA. seetings, I appreciated the hand-control hooks on each side of the wedge, and the bubble level in the baseplate..It arrived earlier than expected, and as usual, my cudoz to Amazon for a pleasent buying experienc..
Scritto da: Joshua Wormley
Heavy, heavy-duty
This wedge puts the "heavy" into heavy-duty. The construction is different than the Meade design, but better, in that there are a little more fine adjustments that can be made, and while the scope is set-up. Having the ability to change azimuth while being totally set-up with the scope is a huge plus. This wedge does require a heavy-duty tripod to use. I rigged my Meade tripod to use this wedge by changing the center screw. It can be done for about a $0.50 nut and 10 minutes of time. If you need a wedge, you'll pay for this one, but it'll be a great investment.
Scritto da: carlos
Excellen
buy this accessory for use with a hd cpc 11. but I use it also with the nexstar 8. this is very well made with heavy duty and very easy and fun to use. is very heavy and sturdy.if you are interested in astrophotography it is the best that is in the remarketing. is made for last. is for professional use. is very Presis. placed on the tripod is very easy to useserves as support for remote control of the camera and telescope control. by weight gives stability to the tripod.
Scritto da: Claudio
This wedge is heavy, really heavy and robust. ...
This wedge is heavy, really heavy and robust. I'll not move once you set it up. I have not polar aligned my telescope yet, but I tested it with the complete telescope on it. I only had to adjust it for my latitude!
Scritto da: Buyer beware
Product delivered on time and was easy to assemble
Product delivered on time and was easy to assemble. This replaces an older Celestron wedge that I have used for 15-years and is a real advancement.
Scritto da: Luis Martin Morin Sanchez
Muy buen producto
Lo que necesitaba para convertir mi montura en ecuatorial
Scritto da: Geoffrey Radcliffe
Good price
Fast service, good price, item as advertised

Liittyvät tuotteet

hot
Bayco SL-8904-40 johtokela, keltainen
3.2/5

€ 244.51

Bayco SL-8904-40 johtokela, keltainen
3.2/5

€ 244.51

hot
hot
Bayco SL-8906 johtokela, musta
2.9/5

€ 423.04

Bayco SL-8906 johtokela, musta
2.9/5

€ 423.04

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array