Cubitron II kumiurallinen laajennuspyörä 28348, 5 tuumaa x 3-1/2 tuumaa 5/8 karan reiässä, 1 per kotelo

Name: Cubitron II kumiurallinen laajennuspyörä 28348, 5 tuumaa x 3-1/2 tuumaa 5/8 karan reiässä, 1 per kotelo
Brand: Cubitron
SKU: 0051141283487
Price: 227.75 EUR
Availability: InStock

Brand:Cubitron

3.5/5

€
227.75

3M kumiuralla varustettu laajennuspyörä käyttää keskipakovoimaa tarttumaan hiomahihnoihin hionnan aikana. Käytä tätä pyörää 3M Inline Sanderissa tai 3M Match & Finish -työkalussa. Sitä on kolme halkaisijaa ja kaksi keskireiän halkaisijaa.

Yksiköitä ei ole saatavilla

EAN: 0051141283487

Luokat Teollinen & Tieteellinen, Kone- ja käsityökalut, Konetyökalujen osat ja tarvikkeet, Koneellisten viimeistelytyökalujen osat ja tarvikkeet, Koneellisen hiomakoneen osat ja tarvikkeet, Tarvikkeet,

Tasaisempi suorituskyky kuin pneumaattiset pyörät. Käyttää keskipakovoimaa tarttuakseen hiomahihnaan. Säteiset reunat vähentävät siirtymäviivoja. Pehmeä 25 duometrin kumi auttaa luomaan hienon viimeistelyn. Käytä 3M Wheel Adapter Kit -sarjaa asentaaksesi 3M Inline Sander -hiomakoneeseen tai 3M Match & Finish -työkaluun.

Brand	Cubitron
Construction Type	Coated
Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
Grit Type	Fine
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item Diameter	5 Inches
Item model number	28348
Manufacturer	3M
Maximum Rotational Speed	3500 RPM
Package Dimensions	6.5 x 6.3 x 4.7 inches; 2.83 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: Garrett

Sized for 5/8"-11 threaded arbor HANDHELD grinders and NOT 5/8" arbored BENCH grinders plus REQUIRES $70 adapter.

I have used this wheel on my Central Machinery bench grinder after much trouble and research. On the plus side, this seems to have an ability to balance itself somewhat even if mounted out of alignment (due to Toolocity's m14 female to 5/8-11 male thread adapter). It holds belts very well and tight at 3,450 rpm. Plus the cheap, off brand belts I bought for it (Tru-Maxx 3-1/2" x 15-1/2" belts at $20 for 5 on eBay) fit perfectly, hold well, and take lots of material off quickly with this wheel. It will soon be a great investment for me as I am a blacksmith and can grind pieces faster as soon as I find a good m14 adapter. I have only found a few downsides to this wheel though they are major: it is not clearly stated that this wheel is sized for ANGLE or INLINE grinders at 5/8-11 threaded arbors and NOT 5/8" arbor BENCH grinders; that it won't even fit a 5/8" bench grinder shaft as the center hole is too big and the wheel is too wide; the wheel itself is very expensive at $110 for just a rubber wheel(?); and you're forced to buy the EXPENSIVE 3M wheel adapter kit on top of this wheel's price if you wish to actually use it, THEN hunt down a thread adapter that is PERFECTLY aligned (check my review on Toolocity's m14 female to 5/8-11 male thread adapter, it is NOT aligned) if you want to use it on a bench grinder. Other than the trouble of getting it to fit equipment, the wheel itself is of perfect quality (which it better be at its price). So I give it a solid 3 stars.

Scritto da: BAS Metal Inc

Four Stars

Great Product for professions shop!!!

Scritto da: wayne jury

Five Stars

great thanks love it