0
0

CURT 56127 ajoneuvon puoleinen mukautettu 4-nastainen perävaunun johtosarja, sopii valittuihin Mitsubishi RVR-, Outlander Sport-, Lancer-, musta

Brand:CURT

3.6/5

112.15

Jos ajoneuvossasi ei ole perävaunun vetämiseen tarkoitettua johtoa, CURT mukautettu johdotus on ihanteellinen ratkaisu. Mukautettu johtosarja, jota kutsutaan myös T-liittimeksi, on yksinkertainen, plug and play -sähkölaite, joka liitetään autosi sähköjärjestelmään ja tarjoaa tavallisen, yleisen perävaunun johdotuksen. Tämä tehdään käyttämällä kahta tai useampaa ajoneuvokohtaista, OEM-yhteensopivaa liitintä, jotka liitetään takavalokokoonpanoon, mikä eliminoi tarpeen leikata, jatkojalostaa ja juottaa asennuksen aikana. Mukautetut johtosarjat on tehty ajoneuvokohtaisesti, ja vaikka niitä ei ole saatavilla kaikkiin ajoneuvoihin, ne tarjoavat yhden nopeimmista, helpoimmista ja turvallisimmista tavoista kytkeä ajoneuvo hinaukseen. Tämä erityinen pistokesarja sisältää 4-suuntaisen litteän pistorasian, ja se on suunniteltu mukautetuksi johtosarjaksi, joka sopii tiettyjen vuosien Mitsubishi RVR:lle, Outlander Sportille ja Lancerille (katso sovellustiedot varmistaaksesi ajoneuvosi yhteensopivuuden). Sen mukana tulee kaikki tarvittavat johdotuskomponentit luotettavan perävaunun johdotuksen muodostamiseksi sekä pölysuoja, joka pitää liittimen puhtaana, kun sitä ei käytetä. Sinulla on mielessäsi kuva seuraavasta määränpäästäsi – ehkä se on suosikkikalastuspaikallesi laskeutuva vene, ehkä se on leirintäalue, josta on näkymät yhdelle luonnon mestariteoksesta, tai ehkä se on seuraava suuri työmaa. Tämän kuvan muuttaminen todellisuudeksi vaatii kuitenkin muutakin kuin pelkkää haaveilua. Se vaatii kiinteän yhteyden ja oikean määrän tehoa. CURT mukautettu johdotus on tehty alan kehittyneimmällä tekniikalla, ja se on suunniteltu asennettavaksi helposti, mikä antaa sinulle pitkäaikaisen sähköliitännän vetokoukun asennukseen.

PÖLYSUOJA. Tämä 4-napainen perävaunun valaisimen johtosarja on varustettu kumisella pölysuojalla, mikä edistää pitkäkestoista käyttöä ja säänkestävyyttä. Se sopii helposti 4-suuntaiseen litteään liittimeen, kun sitä ei käytetä, suojaten sitä ulkoilman vaikutuksilta. LUOTETTAVA VIRTA. Tämä 4-suuntainen perävaunun johtosarja on rakennettu pinta-asennustekniikalla. Tämäntyyppiset piirit tuottavat vähemmän lämpöä, optimaalisen valon voimakkuuden ja kestävän suorituskyvyn. AJONEUVOKOHTAISET. Tämä jälkimarkkinoiden ajoneuvoperävaunun johtosarja on suunniteltu Mitsubishi RVR:n, Outlander Sportin ja Lancerin tiettyihin vuosiin. VAKIOLIITIN. Tätä 4-tasoista perävaunun johtoa voidaan käyttää yhdistämään perävaunun takavalot, jarruvalot ja suuntavilkut. 4-suuntainen perävaunun valojohdotus on suosittu useissa perävaunuissa, mikä lisää ajoneuvoosi monipuolisia hinausvaihtoehtoja. HELPPO ASENTAA. Ei leikkausta! Ei liitoksia! Tämä perävaunun johtosarja liitetään ajoneuvosi olemassa olevaan tehdasjohdotukseen ja on varustettu tavallisella 4-napaisella takaperävaunun johtoliittimellä perävaunun kytkemistä ja hinaamista varten.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 142 ratings 4.5 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number ‎56127
Item Weight 1.73 Pounds
Item Weight ‎1.73 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56127
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56127
Product Dimensions ‎9 x 6 x 3 inches

3.6

13 Review
5 Star
71
4 Star
19
3 Star
4
2 Star
2
1 Star
4

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: john zawistoski
Watch car fit,
Was a good quality, but did not fit my car for the year made.
Scritto da: Daniel
Easy to Install!
Overall it’s an easy installation. however you will find running the cable to the battery a little tricky but not super hard if you are resourceful.
Scritto da: James Houghton
Mostly easy to install, except the 12V battery cable
I got this for a Mitsubishi Outlander Sport. The connections to the existing brake light connectors was easy and the instructions were very clear. Mounting the controller was also easy and it is nice that this kit comes with everything you need. The only weird thing was the battery connections wire. If I ran it through the passenger cabin from the trunk area to the front, there was no clear place to get a wire into the engine compartment without a lot of work. Fortunately I was able to poke it through a rubber grommet in the rear compartment and run it under the car to the battery. There were enough zip ties included to secure the cable from the rear to the front adequately, but I would recommend adding a few additional zip ties just to be sure. The controller worked perfectly when I connected it to my trailer and despite the extra work in getting it installed, I am quite happy with the results.
Scritto da: Wade
Works great
Works exactly as I would've hoped, installation was a bit hard, the interior panels in the trunk had to be removed, and I had to come up with my own power source in the trunk for the wires, it would've been very hard to get a power wire from the trunk to the battery like the instructions say. I had no plans of drilling holes in the car. Overall works great to run the lights for our jetski trailer
Scritto da: Chad R Baxter
Complicated Install
Makes you run a power wire from the battery all the way to the back of the vehicle for power, shouldn't be a need for this. Should draw power from the tail lights you splice into
Scritto da: C. Lane
Simple to install and works!
Hardest part was running wire to battery, everything else is plug and play!
Scritto da: jim
Great product
Great product
Scritto da: Todd Whipple
Plug and play EXCEPT for the wire to the battery.
As noted in other reviews, the instruction don't provide anything for running the power cable to the battery, which take twice the time as all the rest of the attachments, accomplished in 45 minutes. This is the only reason I didn't give it 5 stars. It would have been much worse if I wasnt able to jack the car up (2014 Mitsubishi Outlander Sport). I looked at the possibility of running under the base boards, but that looked like even more work and I could locate a place under the dash to easily run the wire.
Scritto da: jonathan ml
Works great for my 14’ Lancer
Installed it in a rush before a trip. Took 30 minutes to install, instructions are a bit too generic because my Lancer had the plugs on the right and left side instead of only on the left side. You do not need to remove the taillight assembly on these car, skip this step on a Lancer. Double sided tape was so old it was not sticky anymore. All over I like it because it was easy to install. I decided to wire the battery wire to a cigarette plug instead of trough the engine bay and to the battery directly. Con’s: Sticky tape was bad, wrong instruction for a lancer, routing the batt wire will be a pain trough the firewall.
Scritto da: bob
wireing
very nice working well just the black wire from front of battery to the box a big job taking all the trims off a and passing the firewall but for the rest its ok
Scritto da: Begoodjohnny
Easy install
Easy install, fit perfectly. Working great!
Scritto da: Dalton Russell
Works great, easy install besides running a power wire from the battery
Works flawlessly, the install is simple and easy with the exception of running a power wire from the battery. Would have preferred not to have to run power from the battery but it is what it is.
Scritto da: Daniel Caron
great product
works on my 2015 RVR, easy to connect, everything included :) the only downside, is to run a Power from the battery to the trunk. installation time, approx 45 mins.

Liittyvät tuotteet

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array