0
0

Jacobs 14442 34-02 1/2 tuuman raskas liukulaakeroitu avainistukka nro 02 Jacobs kartiokiinnikkeellä

Brand:Jacobs

2.7/5

217.72

TUOTTEEN KUVAUS Leuat keskimuuri takaa täydellisen suorituksen ja kohdistuksen., yksiosainen holkki eliminoi halkeamat vetohampaiden välillä. Usein löytyy muista malleista. Läpikarkaistu holkin hampaat sekä karkaistu nokka ja avaimenreiät tarjoavat erinomaisen kulutuskestävyyden., Jokainen istukka 100 % tarkastettu suorituskyky ja tarkkuus., T.I.R. .004" maksimi puolella kapasiteetilla. VALMISTAJALTA Jacobs 14442 34-02 1/2 tuuman raskaaseen käyttöön tarkoitettu liukulaakeroitu avainistukka nro 02 Jacobs Taper Mount on maailman laajimmin käytetty kannettaviin, penkkiin tai lattiaan asennettaviin sähkötyökaluihin. Tämä teollisuusluokan laadukas istukka, jossa on täysin karkaistuja ja hiottuja komponentteja, tarjoaa poikkeuksellisen suuren tarkkuuden, tarttumisvoiman ja kestävyyden. Istukan kapasiteetti on 0,04 - 0,50 tuumaa (1,0 millimetristä 13 millimetriin) nro 2 Jacobs Taper -kiinnityksellä. T.I.R. 0,004 tuuman maksimi puolella kapasiteetilla. Kuten kaikki Jacobsin liukulaakeriistukat, jokainen Jacobs 34-02 liukulaakeriistukka on 100-prosenttisesti tarkastettu suorituskyvyn ja tarkkuuden osalta, ja se sisältää yhden vuoden tehdastakuun.

T.I.R. .004" maksimi puolella kapasiteetilla. Jokainen istukka on 100 % tarkastettu suorituskyvyn ja tarkkuuden suhteen. Läpikarkaistut hihanhampaat, Plus Hardened -nenä ja avaimenreiät tarjoavat erinomaisen kulutuskestävyyden. Yksiosainen holkki eliminoi halkeamat käyttöhampaiden välillä, joita usein esiintyy muissa malleissa. Leuat keskellä maadoitettua absoluuttiseen suoruuteen ja kohdistukseen.
Batteries Required? ‎No
Brand Jacobs
Country of Origin ‎China
Customer Reviews 3.6 3.6 out of 5 stars 6 ratings 3.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components 8 Jacobs Branded Item
Included Components ‎8 Jacobs Branded Item
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎14442
Item Package Quantity ‎1
Item Weight 1.3 Pounds
Item Weight ‎1.3 pounds
Manufacturer ‎Jacobs Chuck
Number Of Pieces ‎1
Part Number ‎14442
Product Dimensions ‎3.9 x 2.9 x 3.1 inches
Size ‎Small
Warranty Description ‎Jacobs chucks, chuck keys, tool holders, work holders, and accessories, manufactured or distributed by The Jacobs Chuck Manufacturing Company, are warranted to be free from defects in materials or workmanship for one year from the date of purchase. The warranty is limited to repair or replacement of the defective product or to a full refund of its purchase price.

2.7

3 Review
5 Star
29
4 Star
20
3 Star
38
2 Star
13
1 Star
0

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: Dr. Jake
Shame on Jacobs
Jacobs claims a total indicator runout (TIR) of .004 inch (roughly .1 mm). The one I got is much worse than that. The action on it feels gritty too, with a lot of backlash in the screw. The Chinese are perfectly capable of making high precision hardware, but sadly, this is not such an example. Jacobs should find a better shop to make products they stamp their brand on. Shame on them. Not recommended.
Scritto da: Paul
Good chuck for the money
I put this on a 1930's Buffalo drill press that still had the original chuck on it. It's not as fancy as some of the newer keyless designs, but you can't go wrong with Jacobs.
Scritto da: N Review
This is nothing like the old Jacobs chucks which were made in the ...
This chuck came installed on my Accu Tapper thread tapping machine. The machine was made within the last seven years or so, and I assume that the chuck is of similar vintage (~2011). From the start, the chuck felt rough and I had to tighten the jaws really hard to prevent the taps from slipping. I finally decided the other day to open it and see if it needs new grease. I was in shock when I saw the machining of the center body. This is nothing like the old Jacobs chucks which were made in the U.S. The three holes for the jaws had grooves from shavings which were dragged along during a hasty drilling/boring operation. There were huge burrs at every point where the holes broke into open spaces. Everything about the machining of the center body looks really bad. From the outside, one wouldn't know. The sleeve and jaws look good. The Jacobs name and model number were not stamped into the body. They were etched or laser marked. No mention of the country of origin (my old Jacobs chucks say U.S.A. on them). I am afraid Jacobs went the way of "shareholder value".

Liittyvät tuotteet

hot
CS Unitec
4.1/5

€ 168.26

CS Unitec
4.1/5

€ 168.26

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array