Klein Tools 31852 Heavy Duty -reikäleikkuri, 7/8 tuuman kovametallireikäleikkuri leikkaa ruostumatonta terästä, kevyttä terästä, rautaa, kuparia, messinkiä 7/8 (2,2 cm)

Name: Klein Tools 31852 Heavy Duty -reikäleikkuri, 7/8 tuuman kovametallireikäleikkuri leikkaa ruostumatonta terästä, kevyttä terästä, rautaa, kuparia, messinkiä 7/8 (2,2 cm)
Brand: Klein Tools
SKU: 0093580318528
Price: 71.12 EUR
Availability: InStock

Brand:Klein Tools

3.5/5

€
71.12

Käyttää vaihto-ohjausterää 31874. Putken ja putkien koot: 1/2 tuumaa (1,3 cm). Integroitu laippa estää käyttäjää poraamasta metallilevyn ulkopuolelle. Jaetun pisteen ohjausporan terä estää terän kävelemisen. Leikkaa nopeita ja tarkkoja reikiä ruostumattomasta teräksestä, pehmeästä teräksestä, raudasta, kuparista ja messinkilevystä aina 3/16 tuuman (0,5 cm) paksuiseen levyyn. Raskaat, kestävät kovametallireikäleikkurit pitkäikäiseksi.

Määrä

Lisää ostoskoriin Osta nyt

EAN: 0093580318528

Luokat Työkalut & Kodinparannuslaitteet, Kone- ja käsityökalut, Konetyökalujen osat ja tarvikkeet, Koneellisten porakoneiden osat ja tarvikkeet, Reikäsahat ja tarvikkeet, Rengassahat,

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Klein Tools
Customer Reviews	4.5 4.5 out of 5 stars 450 ratings 4.5 out of 5 stars
Handle Material	‎stainless steel
Included Components	‎Tools/Accessories
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6 x 4 x 4 inches
Item model number	‎31852
Item Package Quantity	‎1
Item Weight	‎4.8 ounces
Manufacturer	‎Klein Tools
Material	Stainless Steel,Copper,Steel,Iron,Brass
Material	‎Stainless Steel,Copper,Steel,Iron,Brass
Number Of Pieces	‎1
Part Number	‎31852
Product Dimensions	‎6 x 4 x 4 inches
Shank Type	Straight
Size	‎7/8"
Style	‎Heavy Duty
Tool Flute Type	Straight
Warranty Description	‎1 Year Manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: Daniel

Not your average Klein quality

Purchased this as well as another carbide type hole saw to do a comparison. The other was a fraction of the price yet, I have many Klein tools and trusted the brand. I was let down in ways I couldn't have imagined knowing the dependability and warranty behind all Klein tools. This cutter was slower and suffered minor damage cutting simple metal stud cap to insert a cable pathway and the hole was off by 2mm. Made a second hole with the other bit and the grommet fit perfectly.

Scritto da: dericn

The best I've found for stainless steel

I use these to make holes in 12 gauge (~1/8") 304 stainless electrical enclosures. Low RPM and high pressure is the key. I also use a little cutting fluid. The carbide teeth on these last a LONG time.

Scritto da: Victory Laurel

Professional Hole Saw

Good recoil once hole is made. Use it to cut holes in vehicle roofs. So far so good. You still want to make sure you are free of support from from B and C pillar and add additional space between liner and roof interior. It provides a clean hole. Always use a plastic grommet after the hole is made.

Scritto da: Derek and Alea

Cuts Stainless well!!!

If you are looking for a bit that will cut through stainless steel, you found it!! I used lithium grease with it to cut 16gauge stainless steel sink hole. It did the job well and took maybe 5 minutes. Keep your rpm low. It comes with a chart for speeds and then you just have to check your drill speeds and try and adjust. Very happy with this purchase after burning up two other bits.

Scritto da: Christopher

It’s a Klein tool.

Best holesaws I’ve ever used. I’ve been doing electrical work for near 20 years.

Scritto da: SoCalTech

good but be careful

These hole saws work great but, they like to break teeth off. That usually happens as the pilot bit suddenly breaks through causing the carbide teeth to slam into the material. We ended up using a separate pilot bit and this made the hole saws last.

Scritto da: Dorado

Too fragile

Carbide broke too easy

Scritto da: Mokoloko

Very durable hole saw

I been trying a couple of hole saw and this is by far the best I've ever had. Sometimes i spend days getting thru metal sheets and the blades even notice at all. It’s very durable. You don’t have to push it to much to get the job done.

Scritto da: DD26

Great quick cutter.

Update after use: I may have gotten a dud. Cut under 10 holes and the carbide tips broke off. For the price I’m going back to another manufacturer. Used by a construction electrician. Carbide tips last long time as long as it doesn’t get run to hot. Slow the speed and let it cut. Quick and easy hole for 1/2 connectors or hole punch. Will cut stainless and heavy gauge steel. Priced comparable to other brands.

Scritto da: ZENMAN

High quality tool

Excellent Cutter. After using cutting fluid and burning off the ends of 7/8 high speed steel drill bits in an attempt to cut a single hole in 316 stainless, I used this bit and cut 8 more clean holes through 1/4" wall square tubing. Unlike other holesaws, the cutout ejected easily. Just make sure after each complete cut that you stop your milling machine and clean the cutter teeth with a scriber.

Scritto da: Raf

Very high quality drill bit

Very high quality tool. Makes drilling 3/4 holes in my thick steel trailer effortless. Well worth it

Scritto da: Jennifer Sharp

The cutter was only good for one use and now can not be used again.

I wanted to let you know that when we used the cutter all the teeth came off on the first use. Very disappointed in this product.

Scritto da: Ulises

Good product and price

I have used daily for around a month and still fine