Milescraft 1326 Pocket Jig 300 - Twin/Double Heavy Duty Pocket Hole Jig Kit -järjestelmä. Täydellinen Pocket Hole Kit 2x4:lle kaikkine lisävarusteineen.

Brand:Milescraft

3.7/5

€
85.38

1/2” halkaistu rajoitinrengas estää säätöruuvin luistamisen kiristettynä ja estää terän vierimisen. 1/2" nopea teräsporanterä eliminoi tukkeutumisen ja tekee reiät sileäksi ja tarkaksi. Magneettinen T25 Torx -ajuri ja ruuvit asettuvat helpommin ja siirtävät enemmän vääntömomenttia kuorimatta. Kätevän, sisäänrakennetun syvyydenrajoitinasetuksen avulla voit asettaa poraussyvyyden oikein joka kerta. Kaksiasentoinen aita mahdollistaa jigin kohdistamisen uutta taskureikien poraamista varten tai mukauttamisen korjausta varten. Upotettu, harvinaisen maametallin magneettipuristintasku pitää puristimen samassa asennossa, kun siirrät eri paikkoihin. Tämä jigi on suunniteltu 38 mm:n tai sitä paksummille materiaaleille 1/2":n terällä ja järeillä 2,5" pitkillä ruuveilla. Kaksi reikää on rakennettu karkaistun teräksen poraholkeilla tarkkoja ja tarkkoja 1/2” (12,7 mm) taskureikiä varten.

Määrä

Lisää ostoskoriin Osta nyt

EAN: 0737888132607

Luokat Työkalut & Kodinparannuslaitteet, Kone- ja käsityökalut, Konetyökalujen osat ja tarvikkeet, Jig-tarvikkeet,

Batteries Required?	‎No
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 100 ratings 4.6 out of 5 stars
Included Components	‎Heavy Duty Pocket Jig, 1/2" Split Ring Depth Stop and Allen Key, 6" T25 Driver, 2.5" Heavy Duty Pocket Screws, 1/2" Stepped Drill Bit
Item model number	‎1326
Item Package Quantity	‎1
Item Weight	‎2.2 pounds
Manufacturer	‎Milescraft
Part Number	‎1326
Power Source	‎Hand Powered
Product Dimensions	‎4.72 x 2.36 x 2.36 inches
Usage	‎Outside; Professional, Inside; Amateur, Inside; Professional, Outside; Amateur
Warranty Description	‎3 year

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: dick

Milescraft 1326

Was happy to find this as an alternative to the Kreg HD that I thought was overpriced. Used it with the regular Kreg clamp. Not entirely sure why the drill stop is adjustable, since this is exclusively a 2x hole jig, but it fits well. The 1/4 hex drive on the drill is a nice touch. The kit includes a 6" inch torx bit. Ironically the Kreg HD screws that I bought with this because I needed a PT compatible screw are #3 square drive. Comes with a case that gives some room to carry loose screws. Not sure that I could not have done just as well with regular 3/8" pocket holes, but it did what I was expecting it to do and the extra screw size offers some peace of mind.

Scritto da: Outlet

Takes some practice.

I liked that this works quite well on 2x4 and even 4x4 lumber. My KRAG 700 series Pocket Hole Jig Kit could not handle the thickness of the studs I needed to install. This Jig Kit worked like a charm. It would help if you determined how far from the end of the stud you need to clamp the jig. You want the tip of the drill bit to exit the wood near its center. I use a welder's clamp to hold the jig. The only problem I found was that the depth collar tended to become loose. The shaft of the drill bit needed to have a flat side so the depth collar would not come loose. I used my bench grinder to create this. Had the bit had a flat side, this would have been a 5 star.

Scritto da: Biscuit20

Good

Product works fine. Not quite at the quality of the Kreg, but for the price its goid. Not sure on the durability. Only time will tell. Wish the carrying was better quality. A bit thin. All in all I like it since I dont't use it often.

Scritto da: gtaus

Great for dimensional lumber

Used this jig to make a couple raised garden beds with 2x4 lumber. The thicker, stronger screws for this jig appear to add more strength to the build and I think it will last longer. Very nice addition to the MilesCraft PocketJig line.

Scritto da: K. Shnayderman

Drill Bit Does Not Seem Sharp

Right out of the box, I made a test piece using a pressure treated southern yellow pine 2x4. It felt like I was drilling into hardwood. My project (see photo) was to attach cedar sub-rails to the guard rail posts on my deck. I assumed the cedar would be much easier to drill; however, drilling the pockets required a substantial amount of force on the drill bit which was being driven at max speed using a new 18v cordless Ryobi drill/driver with a 1/2-in chuck. The drill did not produce chips but something more like saw dust or powder. I had to continually cleared the cutting debris by drilling only a short distance (~0.2 inch) and then backing the bit out a 1/2 inch or more. The bit became very hot and the resulting surface of the pocket was not smooth but more fuzzy or "rough-sawn" in appearance. After making only about a dozen holes, the battery was exhausted on my new Ryobi. I was surprised because, on other tasks, one battery would get me several hours of work time. I am now wondering if this is typical of this product and whether I should purchase a different bit, perhaps from Kreg (if it is compatible) before I continue this project. As a result, I am not please with the performance of this tool.

Scritto da: Gray Vinson

Jig itself Tis pretty decent.

Great for 2x4 and 2x6’s However, the tip of stepped drill bit broke the first time I used it. Was on prime select non pressure treated pine 2x4

Scritto da: DK

Nice product

Just bill two large gates and used the pocket jig and some exterior glue. Seems to work well. Great for 2x material. Also the price for this jig is good.

Scritto da: R. Price

Essential Carpentry Tool

Good quality... glad I bought it.