MLCS - MLC-4879 9012 Puuntyöstö yksinomainen Merle-monikulmapuristin

Name: MLCS - MLC-4879 9012 Puuntyöstö yksinomainen Merle-monikulmapuristin
Brand: MLCS
SKU: 7535001616514
Price: 97.56 EUR
Availability: InStock

Brand:MLCS

3.4/5

€
97.56

VALMISTAJALTA Joustavat leukaosat eivät vahingoita ja ne on helppo irrottaa. Ne on valmistettu iskunkestävästä ABS-muovista, mikä takaa pitkän käyttöiän ja raskaan käytön. Dual pivot -ominaisuuden ansiosta Merle voi kiinnittää lähes minkä tahansa kokoisen tai muodon turvallisesti! Täydellinen ympyröille ja soikeille sekä kolmioille, kuusikulmioille, kahdeksankulmioille ja muille. Mukana 23 jalkaa teräsnauha. Merle-puristimessa ei ole lähes mitään kapasiteettirajoitusta! Puristimet niin pienet kuin 2-5/8-x2-5/8-69 x 69 tuumaa tai 23 jalkaa ympäri, mutta ne voidaan pidentää mihin tahansa pituuteen käyttämällä tavallista 3/8 tuuman terästä nauhat tai vanteet. Merle-puristin pitää kaiken tyyppisen kehyksen helposti liimaamista, naulausta tai ruuvaamista varten. Tasainen liitosvoima kaikissa kulmissa. Se sopii erinomaisesti leveille kaappityyppisille kehyksille (käytetään keskellä tai reunoilla) ja myös kapeille kuvakehyksille. Säädettävä Merle-puristin antaa sinun käyttää niin paljon tai vähän puristuspainetta kuin tarvitaan. Valettu alumiini- ja teräsrakenne tekee Merle-puristimesta lujan työkalun, joka toimii kovasti ja pitkään. Pikakiinnikkeet vedetään irti sormella. Leikkaa vain lisää kulmia ja ala töihin!

Määrä

Lisää ostoskoriin Osta nyt

EAN: 7535001616514

Luokat Työkalut & Kodinparannuslaitteet, Kone- ja käsityökalut, Työkalut, Käsityökalut, Kulmapuristimet, Kiinnittimet,

Pikakiinnityskulmat mahdollistavat nopean säädön. Puristimet tekevät upeista lahjoista; yksikään puutyöläinen ei ole koskaan tarpeeksi. Täydellinen kaapin kehyksiin ja kuvakehyksiin. Itsesäätyvät, vaurioittamattomat leukaosat kohdistuvat mihin tahansa kulmaan. Kiinnitä mihin tahansa muotoon helposti.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	MLCS
Color	Red, Silver
Color	‎Red, Silver
Customer Reviews	4.5 4.5 out of 5 stars 333 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎9012
Item Package Quantity	‎1
Item Weight	2.6 Pounds
Item Weight	‎2.6 pounds
Manufacturer	‎MLCS
Package Dimensions	‎15.2 x 6.3 x 1.6 inches
Part Number	‎MLC-4879
Style	Adjustable
Style	‎Adjustable
Warranty Description	‎3 Year Warranty on all merchandise. All products are guaranteed against defects in workmanship ans materials.

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: B. Roberts

Awesome

This clamping system works very well. Just like the other reviews it is a little difficult to use but if you make it big enough before gluing it is awesome.

Scritto da: Michelle Doherty

Fuggn clamp

Is excellent!

Scritto da: Jim Quade

Easy to use, and accurate

I used it on a difficult frame, it made the job much easier

Scritto da: Calvin D

Nice

This product was easy to use, I bought one of these and several of the cloth strap ones on Amazon, they all had exactly the same problem though. If the cabinet door or whatever your building is not perfectly centered they can pop off. I think the flat surfaces that hold the frame in place should be textured or something to prevent that from happening. I ended up putting masking tape on the inside of the plastic edges that hold the frame, to prevent it from popping off. That did not 100% solve the problem, but it did help. Also making sure the frame that you’re working with is perfectly centered in the plastic corner pieces will help to.

Scritto da: S. N. Davis

Difficult unless Patient

Can be challenging to use. Somewhat awkward but once set properly, works well. Be patient.

Scritto da: New England Yankee

Dry Fit and Life is Good

This is solid tool worthy of production use. The pros include very strong clamping pressure, even clamping pressure, clamping all sides at once (>4 if you buy extra corners), plastic corner inserts for softer materials or to accommodate corner irregularities, the ability to clamp from small to enormous, the availability of replacement parts if needed, and sturdy build. The price is quite reasonable for a tool of such quality and capability. Some complain of the fussiness of using the clamp. Well, it DOES take a little finesse or practice to get it just right. On the other hand, there’s nothing fussier than a glue-up with a bunch of separate corner clamps, or 90-degree blocks with screw clamps ... Basically, simplifying use with the Merle clamp amounts to a dry run to get the right length of band and the corners positioned. This takes only seconds to a minute or so, depending on how accustomed you are. If you dry-fit and then loosen just enough to easily slip the corners off, it’s easy to pop them back on again and tighten once you’ve applied glue. Stress-free. If you DON’T dry fit first and try to glue up and adjust all at one, it’s going to feel like a hurried mess ... and you probably will make a mess, too. Do make sure the band clamp bolt (the one that needs a wrench) is *tight*. The screw mechanism exerts tremendous force and the band *will* slip if the bolt is not tight. Terrific product. 5 stars as a production tool. Perhaps 4 for the casual user due to the need to acquire a bit of skill.

Scritto da: hank

Works very well in unique clamping technique.

A sound design that really works. Highly recommend. Not sure how long steel band will last. It creases at some of the clamping points at handle, but that doesn’t seem serious. Would advise coating with light oil before storage. Some of the water based glues could initiate rust. This often requires two people to install, especially on large chest of drawers, etc.

Scritto da: Matthew T. Reese

Makes framing easy

These have brought joy to make frame making, a once mega pain in my arse. What I don't like is the spring loaded metal strip holder. Thing bashes my hand and it's difficult to use all around. Second is that this takes some effort to get this on a frame. It's not that simple b/c you are constantly adjusting. All said, I can frame something in a fraction of the time, get everything square and make a really polished product. All the things I don't like about this pale by the value it delivers. If you are making painting canvases, picture frames, windows or doing wood working, this thing really makes the overall experience joyful.