Norton Stripping Grinder Wheel, maalinpoistolaite metallille, Rapid Strip, halkaisijaltaan 4-1/2 tuuman erikoiskarkea tuuman pyörä, sovitettavissa suorakulmahiomakoneeseen, 1 levyn pakkaus

Name: Norton Stripping Grinder Wheel, maalinpoistolaite metallille, Rapid Strip, halkaisijaltaan 4-1/2 tuuman erikoiskarkea tuuman pyörä, sovitettavissa suorakulmahiomakoneeseen, 1 levyn pakkaus
Brand: Norton
SKU: 0076607040152
Price: 44.16 EUR
Availability: InStock

Brand:Norton

2.7/5

€
44.16

Norton Non-Woven Rapid Strip -keskipainettu teräspyöräharja kiinnittyy satunnaisiin kiertoradalle ja pyöriviin hiomakoneisiin maalin, ruosteen, pinnoitteiden, kevyen reunan purseet, jakoviivat ja välkkymien poistamiseksi. Puolijoustava avoin verkkorakenne kestää kuormitusta ja antaa pyörän mukautua reunoihin, muotoihin ja epätasaisiin pintoihin ilman talttausta. Karkea hankausaine on jakautunut tasaisesti ja sidottu koko pyörään tasaisen suorituskyvyn takaamiseksi. Aggressiivinen vapaaleikkaus auttaa välttämään tahroja työkappaleeseen. Pyörän kiinnitys tapahtuu alaspainetun keskellä olevan 5/8-11 kierteisen akselin navan avulla. Pyörivät hiomalaikat ja kiinnitysteräsharjat tarjoavat aggressiivisen vapaaleikkauksen puun, muovin, muurauksen, lasikuidun ja metallin kuorimiseen, puhdistukseen ja kevyeen purseen poistoon. Vakiokiinnitystyyppi on karan reikä harjan tai pyörän keskellä. Norton Abrasives valmistaa hioma-, hionta- ja kiillotusaineita. Vuonna 1885 perustettu yritys täyttää kansainvälisen standardointijärjestön (ISO) laatu- ja ympäristöjohtamisstandardit 9000 ja 14001.

Määrä

Lisää ostoskoriin Osta nyt

EAN: 0076607040152

Luokat Työkalut & Kodinparannuslaitteet, Teollinen & Tieteellinen, Maalit, Seinäkäsittelyt ja tarvikkeet, Maalausaineet ja työkalut, Maalinpoisto- ja poistoaineet,

Pyörän tyyppi on 27 ja halkaisija 4 1/2 tuumaa. Mitat: 4-1/2 x 5/8 - 11 tuumaa. Tämä pyörä on suunniteltu edistyneellä hartsisidoksella, joka estää irtoamisen, takertumisen, talttauksen ja uudelleenkäsittelyn. Tämä malli toimii hyvin useiden eri koneiden, hevosvoimien ja 12000 rpm:n toimintojen kanssa. Tämä levy on valmistettu alumiinioksidista pitkän käyttöiän varmistamiseksi, ja siinä on avoin verkkorakenne, joka vähentää kuormitusta, mikä on loistava vaihtoehto teräsharjoille. Tämä kuitukangas, karkealla karkealla painettu keskilevy soveltuu käytettäväksi pehmeillä hiiliteräksillä, valuraudalla, betonilla, alumiinilla ja muilla pehmeämmillä pinnoilla. Tämä suorakulmahiomakoneen kanssa yhteensopiva kuorintalevy on ihanteellinen valinta moniin eri käyttötarkoituksiin, mukaan lukien pinnoitteiden poistamiseen sekä ruosteen ja irrotusviivojen poistoon.

Brand	Norton
Compatible Devices	Angle Grinder
Country of Origin	China
Domestic Shipping	Item can be shipped within U.S.
Grit Material	Aluminum Oxide
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item Diameter	4-1/2 Inches
Item Dimensions LxWxH	4.5 x 3 x 4.5 inches
Item model number	07660704015
Manufacturer	St. Gobain Abrasives
Product Dimensions	4.5 x 3 x 4.5 inches; 5.6 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: tjl

only one

only one came, description says pack of 5

Scritto da: J

Better than what Home Depot sells

I used to be able buy this item at Home Depot, not anymore. HD tries to force you to buy exactly what they want you to by only selling one of a particular item. They used to sell this one by Norton but now they only sell one by another brand that is significantly inferior to this one. Boycott home depot.

Scritto da: m. reuling

Little expensive for the life

these things are pretty damn good. They don't have the life that i was expecting. I bought 1 to remove the paint from 3 old aluminum stadium seats i have in my backyard. And 1 lasted just enough to do one seat. They work very quickly but you really should wear long sleeves and pants becuase chunk of the disc will fly off at a high rate of speed and they can sting pretty good. And of course wear eye protection, maybe even a full face shield. When i would try to sand the rivets on the seats a piece or 2 would always fly off, and i was wearing shorts and it gave me a couple little welts. All in all it worked great, but i need to buy at least 2 more for the other 2 seats.

Scritto da: Pam Lindberg

Disc's are good........but they list as a quantity of 5.....you only receive 1

improper quantity listing........

Scritto da: Thomas Howard

Overpriced, don't hold up very well, wears out quick

Have been using these type of discs from other manufacturers to grind stuff for years; the last time I bought some of these type of discs in bulk was a few years ago at Harbor Freight (I think they were like Pittsburgh brand). For some reason they stopped carrying them though, albeit they lasted for quite a while. So now I ordered a couple of these instead and let me tell you, I don't know if they're running out of whatever these things are made of or maybe this manufacturer adds some plutonium or what to them, but they've gotten expensive as heck and don't last a fraction of what the cheap brand did. Part of the rating scale asked me to rate this thing's sheerness - not sure what they meant by that but it sure feels like they're sheering your money right out of your wallet.

Scritto da: 2manyfenders

Works Better Than Others, But There Are Better Options

Of the paint stripping wheels I've used, this version from Norton is the best, by far. This does the job and outlasts the others brands I've tried. That said, it's a costly way to do business. What I've discovered is it works much better to get a Diablo backing pad and use 24 grit Diablo grinding discs to get the job done. The Diablo griding discs cost a fraction of what these paint stripper discs cost and far outlast the stripper discs by a long, long, long time. (you can use either 4 1/2" or 5" pads and discs on your 4 1/2" grinder). It's a dusty endeavor, so keep that in mind. Also, care must be used if using a grinding disc (more care than is needed if using stripping discs), as you can gouge woodwork easily if not careful, if you are exhausted, etc.

Scritto da: Nelson

My favorite disk

I repainted a 25 year old snow thrower with the help of these. Everyone seems to recommend flap disks, but they don't move paint and rust anywhere near as fast as these Norton disks. They are also really good at putting an edge on an old tool. They grind off metal fast but not so fast that you end up with a ragged, rolled over edge. Finally the life seems really good. I stripped the entire front end of the snow thrower and about 8 yard tools on a single disk, and that one disk still has 75% of its grit left. I'm ordering more now, just so I have it ready for later.

Scritto da: jagpilot

Effective and fast. Didn't exactly work for my job.

Works great but Wish it lasted longer. I would have needed three or four to really do my job right stripping old wrought iron. Would have got too expensive. Burned one up and gave up. Too bad. I just ended up stripping the worst areas that were actively flaking. Job was half assed, but the best I could do based on the time and pay involved. Review would be 5 star if it lasted longer or was a few bucks cheaper.