0
0

Ostajat Tuotteet 1804055 Pultilla kiinnitettävä vastaanotinputki musta 2 tuumaa

Brand:Buyers Products

3.8/5

133.85

Kestävä ja luotettava: Vuonna 1946 perustetusta Buyers Productsista on tullut johtava kuorma-autolaitteiden teollisuudessa sitoutumisemme asiakaspalveluun, innovaatioihin ja arvoon koko tuotevalikoimassamme. Teemme asiat oikealla tavalla: Suunnittelemme tuotteita niin kuin rakennamme niitä itsellemme, koska olemme. Tiimimme koostuu insinööreistä ja asiantuntijoista, jotka osaavat tehdä tuotteesta ainutlaatuisen. Enemmän kuin pelkkiä osia: Lumi- ja jäälaitteista työkalulaatikoihin, hydrauliikkaan, hinaus-, kuorma-auto- ja perävaunulaitteistoihin innovatiivisiin valaistustuotteisiin – on hämmästyttävää, mitä Buyers Products voi tehdä kuorma-autollesi. Kestävä ja monipuolinen: Tämä 2 tuuman vastaanotinputki on 6 tuumaa pitkä ja hitsattu 1/2 tuuman teräsasennuslevyyn ja kiinnitetään helposti mihin tahansa kiinnityslevyyn standardin 5/8 tuuman tapin koukun reikäkuvioilla. Pultilla kiinnitettävä vastaanotinputki: Mitoitettu 20 000 paunaan MGTW, tämä korroosionkestävä pulttikiinnitettävä vastaanotinputki mahdollistaa hinauksen joustavuuden vaihdettaessa kuulakiinnitystappikoukkuun; Vaatii Buyers Products -laitteistosarjan 8520 asennusta varten (myydään erikseen).

Kestävä ja luotettava: Vuonna 1946 perustetusta Buyers Productsista on tullut johtava kuorma-autolaitteiden teollisuudessa sitoutumisemme asiakaspalveluun, innovaatioihin ja arvoon koko tuotevalikoimassamme. Teemme asiat oikealla tavalla: Suunnittelemme tuotteita niin kuin rakennamme niitä itsellemme, koska olemme. Tiimimme koostuu insinööreistä ja asiantuntijoista, jotka osaavat tehdä tuotteesta ainutlaatuisen. Enemmän kuin pelkkiä osia: Lumi- ja jäälaitteista työkalulaatikoihin, hydrauliikkaan, hinaus-, kuorma-auto- ja perävaunulaitteistoihin innovatiivisiin valaistustuotteisiin – on hämmästyttävää, mitä Buyers Products voi tehdä kuorma-autollesi. Kestävä ja monipuolinen: Tämä 2 tuuman vastaanotinputki on 6 tuumaa pitkä ja hitsattu 1/2 tuuman teräsasennuslevyyn ja kiinnitetään helposti mihin tahansa kiinnityslevyyn standardin 5/8 tuuman tapin koukun reikäkuvioilla. Pultilla kiinnitettävä vastaanotinputki: Mitoitettu 20 000 paunaan MGTW, tämä korroosionkestävä pulttikiinnitettävä vastaanotinputki mahdollistaa hinauksen joustavuuden vaihdettaessa kuulakiinnitystappikoukkuun; Vaatii Buyers Products -laitteistosarjan 8520 asennusta varten (myydään erikseen).
Brand Buyers Products
Brand ‎Buyers Products
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 393 ratings 4.7 out of 5 stars
Exterior ‎Painted
Finish Type Powder Coated
Is Discontinued By Manufacturer ‎No
Item model number ‎1804055
Item Weight 7.8 Pounds
Item Weight ‎7.8 pounds
Manufacturer ‎Buyers Products
Manufacturer Part Number ‎1804055
Material Alloy Steel
Model ‎1804055
OEM Part Number ‎1804055
Product Dimensions ‎6.25 x 5 x 6 inches
Vehicle Service Type Truck, Trailer

3.8

13 Review
5 Star
86
4 Star
8
3 Star
3
2 Star
1
1 Star
2

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: Gregory P.
Exactly what I needed
Saved a lot of money buying on Amazon vs the local shop!
Scritto da: Lawrence B. Pedrick
This receiver tube could use an additional set of bolt-holes.
My only complaint is that this is not drilled for the "standard pintle 4-bolt" pattern, since there are more than one "standard". If you buy this for your passenger truck you will likely need to drill holes! More about that below. First off, the quality seems good, the powdercoating seems to be durable and the unit seems overall to be very heavy duty. I bought this for my '92 Toyota Land Cruiser with the drilled rear bumper, for light duty use such as a cargo or bike rack. I had originally considered theJohn Deere Gator Front or Rear KFI Receiver Hitch but that seemed too lightweight since it does not have a collar, and I wanted to keep the option of towing a heavier trailer if necessary. I should have looked more closely at the product description and photos, and checked the previous reviewer (who had to drill holes) before buying this. I would have realized the bolt pattern on this is obviously different from my truck. However I read it was for a pintle bolt pattern so I pulled the trigger. There are several different pintle bolt patterns. First is the pattern you will find on most passenger trucks such as Toyota Land Cruiser, Land Rover or mil Chevy, whose bolts are vertically 1-3/4" apart. When you step up to the 30-ton units the bolt-holes are vertically 4-1/2" apart. These are the much heavier pintles you probably find on seriously heavy military and utility trucks, and this is the pattern this Buyers unit is drilled for. This makes even less sense when you consider this mount is only rated to 10-tons. Buyers could solve this by drilling an extra set of holes 1-3/4" below the top holes to allow for the option of using it with either bolt pattern. That would get a five-star rating from me, but with this problem I can only give three. I am still hesitant to go with theJohn Deere Gator Front or Rear KFI Receiver Hitch , and if I keep this Buyers unit I will have to have it drilled (since I don't have a drill press) before I can use it. Unfortunately, for my application this model seems to be the only game in town. I am sure I will be happy with it once it is mounted up.
Scritto da: Anna
Drilled for hitch plate, not pintle.
Just installed this item. It looks like washers will not fit with the welds in the picture, but standard washers fit mine fine. Buyers is a good brand. The holes do not bolt into pintle, this is drilled to fit onto a hitch plate (like the back of a dump truck and sometimes flatbeds). Looks like it should hold up longer than my truck will.
Scritto da: Andrew Ryan
It’s great!!!
I pull a trailer daily and it holds up great
Scritto da: -Dan-
Fit great on back of flatbed
This worked great to use in place of the pintle hitch on the recently purchased shop flatbed. The pintle hitch is great for heavy loads, but we needed to be able to pull a variety of trailers with different ball sizes as well as trailer tongue heights and don’t have a trailer with a pintle hitch. This hitch says it’s rated for 20,000 pounds trailer weight and 2,000 pounds tongue weight, both of which are higher than we would tow with it. It bolted directly to the holes on the back of the knapheide flatbed that the pintle hitch had been bolted to before. Can’t get much easier than that.
Scritto da: Lawdog
Well made product.
I would definitely buy again.
Scritto da: Thomas Jones
No hardware included.
I was really disappointed when it came with no mounting bolts, washers and nuts and no backing plate. Now I have to go to the hardware store or Home Depot and go through the process of elimination to get the bolts, washers and nuts and mounting it without a backing plate is not what I anticipated. Consequently I haven't been able to mount it or see how it will function yet...
Scritto da: Vincent Cutler
Heavy Duty
I’d give it 4.5 stars. Seems pretty heavy duty but the receiver bar rattles in it a little more than I would like. I’m sure it doesn’t affect the performance of the product but may be a little annoying rattling down the road. Having said all that I would buy it again because it seems like a commercial grade product.
Scritto da: Amazon Customer
Great item!
No problems
Scritto da: Derek Bremner
Fits Great on my Trucks rear hitch plate.
Does it’s job
Scritto da: MilkMan
love it
super easy install for RV. It’s nice chuck of solid steel. There’s no weight rating, but it should be more than enough for some light duty use.
Scritto da: Cam
Skookum
Sturdy Construction, Arrived quickly and as expected. Only complaint is that some welds may not allow for washers in-line with the mounting holes.
Scritto da: George Nielsen
Sturdy
Replaced pintle hitch on deck. Drilled 2 new holes.

Liittyvät tuotteet

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array