0
0

OTC 6613:n vaihtuva jakoavain

Brand:NOCO

3.4/5

109.42

OTC:n Variable Pin Scanner Wrench -avaimessa on universaali muotoilu, joka sopii useisiin erityyppisiin hihnapyöriin, joissa on rakoja tai reikiä, mukaan lukien nokka-akselin hihnapyörät, kampiakselin hihnapyörät ja paljon muuta. Jakoavain on säädettävissä 1-1/4 tuumasta 5 tuumaan löysäämällä yksi säätöpultti. Käytä jakoavainta sellaisenaan, kun sen kokonaispituus on noin 12 tuumaa, tai lisää vipuvaikutusta käyttämällä 1/2 tuuman käyttöräikkää tai jarrutankoa. Sarja sisältää seuraavat parit erittäin lujasta teräksestä valmistettuja tappeja: 3,5 mm, 4 mm, 4,5 mm, 5 mm, 6 mm, 7 mm, 10 mm sekä vahva teräskahvakokoonpano. Kestävä puhallusmuovattu säilytyslaukku pitää osat paikoillaan ja järjestyksessä, jotta ne ovat valmiita käyttöön, kun niitä tarvitset. Arvo on OTC-työkalu- ja laitevalikoiman ydin. Olipa kyseessä yksinkertainen korjaus tai monimutkaisin ajettavuusongelma, nämä palkitut työkalut ratkaisevat ongelmat yleisesti nopeammin ja edullisemmin kuin mikään muu saatavilla oleva tuote. Olipa kyseessä erikoistyökalu tai ainutlaatuinen huoltoväline, OTC tarjoaa huippuratkaisuja nykyaikaisiin autoalan huoltohaasteisiin ja lisää samalla teknikkojen tuottavuutta ja myymälöiden voittoja.

Yksiköitä ei ole saatavilla
Kestävä puhallusmuovattu säilytyslaukku pitää osat paikoillaan ja järjestyksessä, jotta ne ovat valmiita käyttöön, kun niitä tarvitaan. Sarja sisältää seuraavat parit erittäin lujasta teräksestä valmistettuja tappeja: 3,5 mm, 4 mm, 4,5 mm, 5 mm, 6 mm, 7 mm, 10 mm sekä vahva teräskahvakokoonpano. Käytä jakoavainta sellaisenaan, kun sen kokonaispituus on noin 12 tuumaa, tai lisää vipuvaikutusta käyttämällä 1/2 tuuman käyttöräikkää tai jarrutankoa. Jakoavain on säädettävissä 1-1/4 tuumasta 5 tuumaan löysäämällä yhtä säätöpulttia. OTC:n Variable Pin Scanner Wrench -avaimessa on universaali muotoilu, joka sopii useisiin erityyppisiin hihnapyöriin, joissa on rakoja tai reikiä, mukaan lukien nokka-akselin hihnapyörät, kampiakselin hihnapyörät ja paljon muuta.
Brand NOCO
Brand ‎NOCO
Country of Origin ‎Taiwan
Customer Reviews 4.3 4.3 out of 5 stars 708 ratings 4.3 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish Type ‎Polished
Head Style ‎Fixed Square
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 20.8 x 4.4 x 2.3 inches
Item Dimensions LxWxH ‎20.8 x 4.4 x 2.3 inches
Item model number ‎6613
Item Package Quantity 1
Item Package Quantity ‎1
Item Weight 1.2 Grams
Item Weight ‎0.042 ounces
Item Weight ‎1.2 Grams
Lift Type ‎Mechanical
Manufacturer ‎OTC
Manufacturer Part Number ‎6613
Material Alloy Steel
Material ‎Alloy Steel
Model ‎6613 Variable pin Spanner Wrench
Product Dimensions ‎20.8 x 4.4 x 2.3 inches

3.4

13 Review
5 Star
68
4 Star
14
3 Star
8
2 Star
3
1 Star
7

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: electroken
It got the job done, but it's not perfect.
This product is marked as a Toyota Camshaft tool, but that's not what I needed it to do. I needed a pin spanner to remove the bearing retainer from the rear wheel of a 1972 Honda CB350. The holes in the retainer are 5mm diameter, and a set of pins in this tool set fit them well. Unfortunately, none of the pins would thread into the tool because the female threads in both of the arms were a mess. Once they were chased with a M10 x 1.25 tap, all of the pins fit the tool correctly. This bearing retainer was tight, so I needed to use a 1/2" breaker bar, which fortunately this tool was designed to accept and it handled the additional force well. The tool would get 5 stars if I didn't have to finish making the tool before using it.
Scritto da: Michaels
Will hold
Holds gears with at least two holes or slots. Appears sturdy enough for most cam gears.
Scritto da: Wally Wonderful
OK, weak weld
beware the weak weld at the end where the square ratchet opening is. case clasps are flimsy and will break after a few uses.
Scritto da: Mitch Martin
Heavy duty pin spanner wrench
Even though this is specified as a Toyota pin wrench, I got it primarily to take some motors and specialty equipment apart. It had zero issues putting up with amount of torque I was putting on the little pins to get things apart. On the end of the wrench is a 1/2 inch drive square to really give you some extra leverage with a breaker bar or regular ratchet. Pins included are 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm. Fully opened up, I could get the wrench to expand to just over 5 inches. The blow molded case holds the pins and wrench fairly secure as I have dropped it many times with no damage. In a ruined fastener, have been able to drill some semi deep holes and used this wrench with great success. Overall, have had no issues with the few times that I have used this. Would definitely recommend. Pros: - Great assortment of pins - Held up to over 100 ft/lbs of torque - Saved hours of time instead of using a chisel and hammer - Coating is holding up well after a year Cons: - Pins can sometimes not be the straightest in the wrench (especially with the longer piece)
Scritto da: VC
does what it's advertised to do.
The variety and size spread of the various threaded pin inserts makes this wide reaching tool for most hydraulic/pneumatic cylinders. Uncomfortable grip for the tool as it is basically square sharp edged bar stock.
Scritto da: Internet
This will NOT work for BMW E30 Front Struts
BMW use a nut with four holes to secure the front strut cartridge into strut housing. I foolishly thought this would work to remove that nut. The pins fit but the tool isn't robust enough to handle the torque and just twists and makes a mess. The correct tool is a socket with 4 pins in it (or just use a pipe wrench with sharp teeth and some heat). Regardless, this is a nice tool and I'm happy to have it if I need it. Just throwing this out there for anyone that is looking to do an E30 front strut with it.
Scritto da: Anne M. Amy
This took held up on a large Jack service project.
I have always been happy with the OTC quality and the price. This tool was no exception and I used it on a very large service call where I had to service 26 100 tone jacks. The tool adjusted and locked down very nicely. It also helps up with a cheater pipe attached to my ratchet. It was a little hard keeping it on the plug, But that is a two-hole spanner thing. The tool did a great job and the price was good. If you need a spanner tool, you will not be disappointed.
Scritto da: Bob
Good spanner
God spanner wrench and versatile with multiple pin sizes.
Scritto da: John Tilbury
Good product
Works used it on my s770 Bobcat
Scritto da: Valudex
Solid built Tool
Easily handles most hydraulic cylinder collars
Scritto da: Michael L
Excellent quality
Good quality
Scritto da: Moffat66
Excellent Product for professionals or DIYer's
Excellent product! OTC is a great company. Kit is exactly what i expected. Quality is on point. I am a professional mechanic and i will be using this often. other professional mechanics referred me to OTC products and i am always very satisfied with the quality of there tools. Amazon is also an amazing company to deal with, Very fast delivery.
Scritto da: Walter
Great buy
Very strong actually. I rebuild hydraulic cylinders and hold up well to the high end stuff.

Liittyvät tuotteet

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array