0
0

PC-tuotteet PC-11 epoksiliimapasta, kaksiosainen merilaatu, 1/2 lb kahdessa tölkissä, luonnonvalkoinen 80115 PC-11 1/2 lb

Brand:PC Products

3.6/5

42.21

TUOTTEEN KUVAUS PC-11 on muotoiltu aidoksi meriepoksiksi, jonka avulla käyttäjät voivat kiinnittyä kosteisiin, kuiviin ja täysin upotettuihin alustoihin. PC-11-formulaatio tarjoaa pidennetyn työajan suuriin ja kriittisiin töihin, jolloin käyttäjä voi sijoittaa työn uudelleen tai tehdä muutoksia. PC-11:n korkea märkä tartunta tai takki tekee pään ja sivuseinien työstä helppoa ilman tippumista tai painumista. PC-11 kestää erinomaisen kemiallisen kestävyyden mietoja happoja, emäksisiä, pesuaineita, bensiiniä, polttoöljyä, suolaa ja makeaa vettä vastaan. Aseta PC-11-säiliöt kylmässä tai viileässä lähelle lämpöä ennen käyttöä. PC-11 sekoittuu ja levittyy helpommin 80 asteessa kuin 40 asteessa. Mikä tahansa puhdas sileä tasainen pinta on erinomainen pinta sekoitus- ja työstöpinta. Pieni kittiveitsi tai joustava taiteilijalasta ovat loistavia työkaluja PC-11:n sekoittamiseen ja levittämiseen. Denaturoitu alkoholi sopii erinomaisesti levitetyn PC-11:n tasoittamiseen. Käytä myös denaturoitua alkoholia pintojen puhdistamiseen ennen levittämistä. Käytä seuraavien kanssa: puu, metalli (kaikki tyypit), lasi, tiili, harkko, kumi, betoni, kivi, liuskekivi, lasikuitu, laatta ja muut missä tahansa ja kaikissa yhdistelmissä; tiivisteaineena: öljy-, kaasu-, vesisäiliöt, kellarin halkeamat, painesäiliöt ja putkiston vuodot; täyteaineena: reiät, valukappaleet, kuviot, muotit, aukot, hitsit ja paljon muuta. Työaika (70 astetta F): 30-40 minuuttia. Tack-vapaa kovettumisaika: 90 minuuttia. Huollon kovettumisaika: 8-12 tuntia. Maksimi parantuminen: 7 päivää. Gardnerin iskunkestävyys: 140 tuumaa/lb. Johtokyky (sähköinen): ei johtava. Erinomainen lämpöshokki. Myrkytön, kun se on kovettunut. Lämpöalue: -20 - 200 astetta F. VALMISTAJALTA PC-tuotteet, jotka juhlivat 75 vuotta "Fixing Your Things" -tapahtumaa, laadukkailla, luotettavilla korjaustuotteilla. Korjausratkaisuja lähes kaikkeen, joka tarvitsee korjausta tai mitä voit rikkoa. Betonista puun entisöintiin ja raskaisiin pysyviin korjauksiin tarjoamme sinulle huolen. Joo; Voimme korjata sen

Kestää mietoja happoja, emäksisiä aineita, pesuaineita, bensiiniä, polttoöljyä sekä makeaa ja suolaista vettä. Erittäin tarttuvaa tahnaa voidaan käyttää pysty- ja yläpuolella olevissa sovelluksissa. Voidaan käyttää sisä- ja ulkosovelluksissa lämpötila-alueella 35 - 115 astetta F ja käyttölämpötila -20 - +200 astetta F. Liimaa monia materiaaleja, mukaan lukien lasikuitu, betoni, monet metallit, lasi, keramiikka ja kumi . Kaksikomponenttinen meriepoksiliimapasta liimaa materiaaleja kuivissa, märissä ja vedenalaisissa ympäristöissä.
Brand PC Products
Color Off White
Compatible Material Fiberglass, Glass, Ceramic, Concrete, Metal
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item Form Paste
Item model number 80115
Manufacturer Protective Coating Co.
Material Paste
Product Dimensions 4.75 x 2 x 2 inches; 11.2 Ounces

3.6

13 Review
5 Star
73
4 Star
17
3 Star
5
2 Star
2
1 Star
3

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: Al
Waterproof
I used the PC-11 epoxy to repair a leaking bathroom sink. The overflow channel to the drain had a small crack. I applied the PC-11 and let it cure for 48 hours before I put everything back and tested it. It no longers leaks! Wish I would have known to use denatured alcohol to clean the scaper after I applied the epoxy.
Scritto da: Lori Lamb
Awesome!!
I am a crafter and always end up being the person people bring their problems to. They know I can fix it! Recently I was asked if there was anyway I could fix a shattered ashtray for a friend. It was a glazed pottery in 100 pieces! I glued together what I could decipher but ended up with holes in several areas and extra pieces that wouldn't fit anywhere! I looked and looked for something to use. I saw this on a YouTube video, ordered it and went to work. I completely molded pieces with this and sanded and shaped and came out with a beautiful ashtray. I did some re- designing but she loved it. It made her cry! She said it was no longer going to be an ashtray she was putting it on display. The second picture is from the bottom to show how nicely this product helped me fabricate the pieces! I shocked myself! Good stuff!!
Scritto da: Amanda Bartlett
Amazing
A staple in my studio
Scritto da: shane reil
Product is white
I did not read the description or its not in the listing that the product is off white. What I was using the product for it would not work but dried hard and was very sticky.
Scritto da: PC
Not the best quality
Doesnt adhere to most usual materials. Looks like it have too many additives among the epoxy itself.
Scritto da: Tickles
It worked.
Our depth sounder sprung a leak. I dove underwater to apply it. It did work; but wasn't easy holding my breath, with limited time and poor visibility, trying to speckled it to the bottom of the boat. First few trys weren't working; later, I applied more with force, made sure that I pushed it into all the cracks and grooves, it worked.
Scritto da: Ron
Good stuff
Really good stuff in use it for lots of stuff and I love it.
Scritto da: Runners
Works!
As stated this stuff is handy and it works great.
Scritto da: Meg
Gnome repair
I used it to repair some old gnomes that had cracks and missing pieces like the nose etc. It worked really well in filling in the holes and moulding them a new nose and I was able to paint over it no problem. I was worried about messing up the mixing process but it turned out good it wasn't a problem.
Scritto da: Susan Dring
Foes the job.
Did what I wanted it to.
Scritto da: Scotty
Nice thick epoxy that doesn't drip.
I used this for fixing my reel seat on to my fishing rod, I like that it is a paste and does not drip.
Scritto da: graham fisk
Bit of a drip
Still got the original leak, not as waterproof as claimed
Scritto da: devaka ekanayake
Good strength
All good. The end product colour is a blueish white. I wish it was pure white.

Liittyvät tuotteet

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array