0
0

Pitsco Basic Mousetrap Vehicle Kit (yksittäinen pakkaus) 1 opiskelijalle

Brand:Pitsco

3.2/5

64.56

Pitsco Balsa Wood Basic Mousetrap Vehicle -ajoneuvosarja tarjoaa 6–12-luokkien opiskelijoille käytännönläheisen toiminnan suunnitella ja rakentaa malli-autoa, joka esittelee tieteellisiä käsitteitä, kuten nopeutta, voimaa, liikettä ja Newtonin fysiikan lakeja, ja se opettaa teknistä suunnittelua. Oppilaat voivat rakentaa auton sarjasta ja muokata autoa suorituskyvyn ja nopeuden parantamiseksi. Sarja sisältää hiirenloukun, 12 ja 18 tuuman pitkiä balsapuukappaleita, vakiokokoisia kompakteja pyöriä varten, pyörän välilevyt, painelevyt, 12 tuuman messinkiletkukappaleet, erittäin ohuen narun ja ohjeet. Pitsco-sarjat 57034 (10 sarjan pakkaus) ja 57035 (30 sarjan pakkaus) sisältävät myös kopion Doc Fizzixin Mousetrap Powered Cars and Boats -käsikirjasta. Valmiin ajoneuvon mitat ovat noin 4,5 x 5 x 26,5 tuumaa (K x L x S). (H on korkeus, pystysuora etäisyys alimmasta korkeimpaan kohtaan; W on leveys, vaakasuora etäisyys vasemmalta oikealle; D on syvyys, vaakasuora etäisyys edestä taakse.) Hiiriloukkuajoneuvosarjaa käytetään tyypillisesti opetusympäristössä tekniikan ja fysiikan esittelyyn.Rakentaminen vaatii valkoista liimaa, viivainta, harrastusveistä, lankaleikkuria ja poraa tai Dremel-työkalua (kaikki myydään erikseen). Luonnontieteiden koulutustuotteissa käytetään sovellettuja matematiikkaa ja luonnontieteitä luokkahuoneprojekteissa. Esikoulu-, ala- ja toisen asteen luokkahuoneiden opettajat käyttävät luonnontieteiden koulutussarjoja ja -tuotteita luonnontieteiden, teknologian, tekniikan ja matematiikan (STEM) opetussuunnitelman ohella STEM-konseptien ja todellisten sovellusten esittelyyn käytännön toimintojen avulla. Luonnontieteiden koulutusprojektit sisältävät laajan valikoiman toimintoja, kuten käytännön kokeita tekniikan, ilmailun, robotiikan, energian, kemian, fysiikan, biologian ja geologian aloilla. Pitsco Education kehittää perus-opintojen tieteen, teknologian, tekniikan ja matematiikan (STEM) opetussuunnitelmaa , opetussarjoja ja luokkahuonetyökaluja. Vuonna 1971 perustetun yrityksen pääkonttori sijaitsee Pittsburgissa, KS. What's in the Box? * Pitsco Balsa Wood Basic Mousetrap Vehicle Kit * Hiiriloukut (yksi per auto) * Balsa puupalat (3 per auto) * Kompaktilevyt (4 per auto) * Välilevyt (4 per auto) * Aluslevyt (4 per auto) * Messinkiletku (2 pituutta per auto) * Erittäin ohut naru (1 pituus per auto) * Käsikirja, Doc Fizzixin hiirenloukkumoottorilla toimivat autot ja veneet (vain 10 kpl ja 30 kpl) * OhjeetHuomautus: Kuvassa olevat pyörät eivät ole tyypillisiä, mutta ne ovat esimerkki kuinka opiskelijat voivat maalata ja koristella ajoneuvojaan.

Yksiköitä ei ole saatavilla
Valmiin ajoneuvon mitat ovat noin 4,5 x 5 x 26,5 tuumaa (K x L x S). Vahvistaa teknologian, tekniikan ja matematiikan käsitteitä, kun opiskelijat muokkaavat autoja suorituskykyyn vaikuttavien tekijöiden perusteella. Altistaa opiskelijat suunnitteluprosessille ja rohkaisee heitä kokeilemaan ja muokkaamaan ajoneuvoa suuremmaksi nopeudeksi tai matkaksi. Sisältää osia, joita tarvitaan hiirenloukun käyttämän ajoneuvon rakentamiseen teknisen suunnittelun opettamiseen. Puinen hiirenloukkuajoneuvosarja tarjoaa 6–12-luokkien oppilaille käytännönläheisen toiminnan malliauton suunnittelussa, rakentamisessa ja muokkaamisessa. Se esittelee nopeuden, voiman, liikkeen tieteellisiä käsitteitä ja Newtonin fysiikan lakeja.
Age Range (Description) 12+
Brand Pitsco
Country of Origin USA
Customer Reviews 4.1 4.1 out of 5 stars 202 ratings 4.1 out of 5 stars
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 17.9 x 4.6 x 0.4 inches
Item model number BG57033
Item Weight 0.4 Pounds
Item Weight 6.4 ounces
Manufacturer Pitsco
Product Dimensions 17.9 x 4.6 x 0.4 inches
Size For 1 Student

3.2

8 Review
5 Star
59
4 Star
14
3 Star
15
2 Star
4
1 Star
9

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: Britt
Not the wheels in the image
Clear, flimsy wheels came in this kit. I specifically bought this because I thought the wheels were stronger and looked cool. I was extremely disappointed. The kit is way overpriced for what's with it. The car came together ok with some upgraded wheels.
Scritto da: Jonathon D Leszczynski
This kit works, but you can make it much better with some intelligent improvements.
The directions are great and this is a perfect kit to MODIFY for a racer. Skip using the board you see below the mousetrap as one big board. Instead, glue the mousetrap straight to the two side boards (so the car is as wide as the mousetrap) after you cut off a couple more, mousetrap width pieces, from the big board. Use those additional pieces to stiffen up the frame. Use a pipe cutter to trim the axles and get some nylon washers from the hardware store to fit the axles (I used #10 sized.) The nylon washers help you keep the axles straight. If you really have time, you can drill out a bunch of holes to save weight. I also had some wider CD sized wheels that came from the packaging of 100 packs of DVD's, and those wheels easily accepted a wider rubber band to help provide traction to the drive tires. Also, consider a single front wheel over two, if you can manipulate it.
Scritto da: Mellisa Boan
Science Olympiad parent approved
Bought this for Science Olympiad from seeing other parents using this the year prior. Our child signed up for Mousetrap Vehicle AGAIN! We were not thrilled. Year prior we spent countless hours, days, weeks making the perfect mousetrap vehicle. We built around 3 and our kid’s friends parents build 4 or 5. You could imagine the stress this brought to our family. Well when our kids came home and was so happy about signing up for this endeavor again, we were shocked she didn’t remember the pain and anguish from the last year. I quickly bought this and it was PAINLESS and RELAXING. This is easy and fun, the way it should have been the first time. Instructions are kid friendly. Our 10 years did most of the work. Super convenient!
Scritto da: Jerry Stowers
Fun kit to build!
My daughter had this as a school project so we built it and it worked great, it was a science project about force! She painted it too, great fun!
Scritto da: shoppers voice
It worked. Price is a little high for what it is.
I ordered this on two day shipping, and it came on time for a school project. It was missing one of the plastic CDs, so I just used a junk one that I have. The brand for this product is wrong, this is actually a mousetrap car from DocFizzix.com from years ago, I'd assume that they are just re-branding them and selling off left over stock. As for the quality, its okay. The CDs are flimsy and I recommend using real disks for ease of build. Also I found out that it's actually cheaper to buy this off of their store, for like 15 dollars. After I finally managed to throw it together, it performed okay. This thing works best when you have it on longer and flatter surfaces, unlike my test trials (ie. a shorter hallway and on carpet). So, with all of this considered, I give this a 3/5. Is it worth 20 dollars? No, more like 15, or even 10. I also included some images of the build and the package it came in, some of the images may be poor quality so I apologize.
Scritto da: Mark M.
Good enough for 3rd place out of 25.
My daughter ended up with an 87’ run using this kit for a physics class project. Much simpler than trying to do it from scratch. The resulting car is great for a school project. By design it’s not made to be crashed into a fleet of toy trucks by an 8 year old. It did its job at our home and is destined for the trash can during a cleaning project a year from now ;).
Scritto da: Peter M.
A very worthwhile purchase for the curious minded.
The kit was very well made, and I loved the fact that the holes were predrilled. The instructions would be more helpful if it were a little more in dept, as the last steps were very confusing for me. If you by any chance use this kit for Science Olympiad, then you might face problems with the vehicle not fitting into the even parameters, but this issue could be easily fixed with some modifications. All in all, this was an excellent mousetrap vehicle.
Scritto da: James W Thomas
Sucks.
Wheels don’t stay on. Mousetrap spring broke off. Frame has no support. What a disappointment!

Liittyvät tuotteet

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array