0
0

SharkBite 3/4 tuumaa x 1 tuumaa FIP x 24 tuumaa ruostumattomasta teräksestä punottu joustava vedenpehmennysliitin, Push To Connect messinkiputkiliitin, PEX-putki, kupari, CPVC, PE-RT, HDPE, U3086FLEX24LF

Brand:SharkBite

3.8/5

56.71

TUOTTEEN KUVAUS Tämä joustava ruostumattomasta teräksestä valmistettu SharkBite vesiohjelmistoliitin, joka on valmistettu ruostumattomasta teräksestä, mahdollistaa uusien vedenpehmentimien liittämisen tai olemassa olevien liittimien vaihtamisen nopeasti ja helposti. Tämä push-to-connect-rakenne sopii erinomaisesti ahtaisiin tiloihin ja varmistaa puhtaan, vuotamattoman liitännän. Tämä intuitiivinen vedenlämmittimen liitos on yhteensopiva PEX-putkien, PE-RT-, CPVC-, SDR-9 HDPE- ja kupariputkien kanssa missä tahansa yhdistelmässä. Tämän vedenlämmittimen letkun molemmissa päissä oleva innovatiivinen push-to-connect-rakenne tekee tiukkoja käännöksiä ilman taittumista liittääkseen putkia, jotka eivät ole kohdakkain. Tätä kannettavaa vedenlämmittimen liitäntää voidaan käyttää ilman erikoistyökaluja, juottamista tai liimaa helpottamaan ja nopeampaa asennusta. SharkBite-työkalut ja -varusteet täyttävät samat korkeat standardit kaupallisissa ja asuinrakennusten putkisovelluksissa yhdistäen kestävyyden ja helppokäyttöisyyden, jotka sopivat kaupallisiin korjauksiin tai kodin kunnostusprojekteihin. SharkBite-vedenpehmennysliittimien maksimikäyttölämpötila on 200 astetta F ja suurin käyttöpaine 200 PSI. VALMISTAJALTA Nämä ruostumattomasta teräksestä punotut liittimet tekevät vedenpehmentimestä nopean kiinnityksen. Mahdollisuus kääntää SharkBite-liitintä sen jälkeen, kun se on työnnetty putkeen, ja punottu letkun joustavuus mahdollistavat liitännät ahtaissa tiloissa ja ilman lisäliittimiä.

TEKNISET TIEDOT: SharkBite-vedenlämmittimen liittimien maksimikäyttölämpötila on 200 astetta F ja suurin käyttöpaine 200 PSI. PRO: SharkBite-työkalut ja tarvikkeet täyttävät samat korkeat standardit kaupallisissa ja asuinrakennusten putkisovelluksissa; sopii kaupallisiin korjauksiin tai kodin parannusprojekteihin; varmistaa puhtaan, vuotamattoman liitännän ja on lyijytön. HELPPO ASENTAA: Tämän vedenlämmittimen letkun molemmat päät tekevät tiukkoja käännöksiä ilman taittumista liittääkseen putkia, jotka eivät ole kohdakkain; helppoon asennukseen ei tarvita työkaluja, puristusta, liimaa tai juottamista; poista käyttämällä irrotuspidikettä tai irrota pihdejä. MONIPUOLINEN: Tämä joustava vedenlämmittimen liitäntä toimii hyvin PEX-putkien, PE-RT-, CPVC-, SDR-9 HDPE- ja kupariputkien kanssa. SHARKBITE VEDENPEHMENTIMEN LIITIN: Tämä kannettava ruostumattomasta teräksestä valmistettu vedenpehmennysliitin, joka on valmistettu ruostumattomasta teräksestä, mahdollistaa uusien vedenpehmentimien liittämisen tai olemassa olevien liittimien vaihtamisen nopeasti ja helposti; ihanteellinen työskentelyyn ahtaissa tiloissa.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Certification
Color Stainless Steel
Color ‎Stainless Steel
Country of Origin ‎China
Customer Reviews 4.8 4.8 out of 5 stars 481 ratings 4.8 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Brass
Exterior Finish ‎Brass
Included Components ‎Water Softener Hose
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 24 x 1.25 x 1.25 inches
Item Dimensions LxWxH ‎24 x 1.25 x 1.25 inches
Item model number ‎U3086FLEX24LF
Item Package Quantity ‎1
Item Weight 0.75 Pounds
Item Weight ‎0.75 Pounds
Item Weight ‎12 ounces
Manufacturer ‎Cash Acme
Material Stainless Steel
Material ‎Stainless Steel
Measurement System ‎inch
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎U3086FLEX24LF
Product Dimensions ‎24 x 1.25 x 1.25 inches
Size Pack of 1
Size ‎Pack of 1
Thread Type NPT
Thread Type ‎NPT

3.8

13 Review
5 Star
86
4 Star
8
3 Star
4
2 Star
1
1 Star
2

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: WinpakBob
Plumbing Pro Result
This easy to install hose will make a pro out of you. Perfect match to my water softener manifold and connected easily to my drippy supply pipes. It may be a bit pricy, and if you love to mumble four letter words under your breath as you try to solder drippy pipes, this may not be for you. BUT if you want to get the job done well and the first time, the price is worth it!
Scritto da: Tyler Fullington
Works Well For Specific Scenarios, No Tools / Skills Needed
This is the perfect part for integrating a water softener and/or iron filter into your existing 3/4" water system. It is easy to install, requiring no special tools or skills and very effective for it's purpose. The flexible lines make for great smooth flow, and there are no leaks when installed correctly. However, if you are building a new system or want something cleaner looking, I would recommend the "SharkBite UC529LFA 3/4x1 FNPT swivel adapter" also on amazon for $8 each. They require a crimp connection so they aren't for everyone, but if you are already overhauling your water piping and have or are planning on getting crimpers they are the perfect part for the job and not something you will find locally. That being said, I used these flexible hoses as an interim part of my setup and reused a set that came with my water softener and had zero issues, just wanted more flexibility and less torsional stress on the heads of my filtration equipment (these are heavy). P.S. Bonus is if you add equipment you can totally use a short piece of pipe and connect these SharkBite to SharkBite, I had this setup more over a month with no issues and see no reason it couldn't last as long as a typical SharkBite connection.
Scritto da: Kevin
as advertised
as advertised
Scritto da: Orlando Leone
Another thing I wish I knew existed.
This, too, would have saved me tremendous amounts of time from welding PVC adapters to PEX. It is usually best to avoid plastic runs to/from UV canisters as well.
Scritto da: jimh1008
SharkBite water softener hoses
Making a somewhat tough job (sweating copper fittings) of connecting a water softener, a piece of cake. Whether you are using copper or PEX lines.......these make for a nice and quick connection.
Scritto da: Dshow
I like these fittings...
First time using 'sharkbite' connectors. Very easy to install. They tell you the distance on the pipe these should be seated. I marked that distance on the pipe and these did not install that far...? (It was close...) Since I installed 2 and they installed the same distance each and didn't leak, I called it good.... My connections are easy to get at if there is ever an issue. Anyway, I will use Sharkbite again. (They cost more so I wouldn't want to build a house with them, but for minor repair work, they are great!)
Scritto da: john
what has happen when installing
The 3/4 copper pipe did not go in far enough
Scritto da: MacAttack
Good product
Quality plumbing parts. Installation is easy. Just remember to polish the pipe if corroded and remove any burrs. However if you need to remove the hose afterwards you'll need a release tool. The cheap little release tools found at home improvement stores are a bear to use. I did have to remove mine after a temporary install. Squeezing the tool and pulling on the hose without destroying the pipes connected to it was a chore. I got it done though and with no leaks.
Scritto da: Mike
Sharkbite for Watersoftener
So very happy! I had trouble finding a way to change out my old softener for a new one without doing new plumbing. These flex pipes did the trick. I cut off the old and just stuck these on. No leaks and everything works great!
Scritto da: Guru
Convenience
This braided flexible stainless steel hose is very convenient. It correct for any floor unevenness and make installation very simple, practical and fast thus make the installation job very easy. Note: This hose should have been included in every water softener unit. On a 10 rating scale, I will give it a perfect 10.
Scritto da: Fred Labbate
excellant!
I bought 2 of these and used them with a Scala 2 pump. The 1" end threads right onto the pump inlet and outlet with some Teflon tape applied. Not much more that hand tight and no leaks! the 3/4" sharkbite end is great tied right into my 3/4" pipework. Price is way better than the local hardware store!
Scritto da: Rammy
Ease of install
Work great. Time saver and must have as it is hare to find the 1 inch fittings when installing water softener.
Scritto da: Doug Kiesman
The size at both ends and length
Used it to hook up my water softener was fast and easy worked great

Liittyvät tuotteet

hot
Emberglo 523618 Flame Rod Midco
4/5

€ 67.11

Emberglo 523618 Flame Rod Midco
4/5

€ 67.11

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array