Trend 12-osainen reitittimen aloitussarja, 1/4 tuuman varsi, volframikarbidikärki, säilytyskotelo mukana, SET/SS8X1/4TC 12-osainen sarja

Name: Trend 12-osainen reitittimen aloitussarja, 1/4 tuuman varsi, volframikarbidikärki, säilytyskotelo mukana, SET/SS8X1/4TC 12-osainen sarja
Brand: Trend Enterprises
SKU: 5027654033951
Price: 72.05 EUR
Availability: InStock

Brand:Trend Enterprises

3.6/5

€
72.05

Trend SET/SS8X1/4TC on täydellinen jyrsimen aloitussarja johdatukseksi jyrsimiseen käytettäessä 1/4 tuuman varrella varustettua reititintä, kuten Trend T5:tä. 12 leikkurista koostuva sarja kattaa yleisesti käytetyt profiilit reunus-, uritus-, harjaus-, trimmaus- ja koristetöissä. Tukeva kotelo pitää kaikki jyrsimen leikkuutyökalut turvassa, järjestyksessä ja käyttövalmiina aina, kun tarvitset. Sisältää: 1 x suora 6,3 mm halkaisija x 16 mm leikkaus1 x suora 12,7 mm halkaisija x 19 mm leikkaus1 x lohenpyrstö 104 astetta x 12,7 mm halkaisija 2 x Ohjattu ympyräsäde 6,35 mm & 9,5 mm1 x Ohjattu viiste 45 astetta 1 x Ohjattu harja 9,5 mm harkko1 x Ohjattu trimmeri halk. 12,7 mm1 x Ohjattu kojeen säde 6,3 mm1 x V-ura 45 astetta1 x Ydinkotelon säde 435 mm x Ohjattu O35 mm säde 6.

Määrä

Lisää ostoskoriin Osta nyt

EAN: 5027654033951

Luokat Kone- ja käsityökalut, Konetyökalujen osat ja tarvikkeet, Routerin osat ja tarvikkeet, Router Bits, Suorat, Spiral & Trim Bits, Suorat,

SUOJAAVÄ SÄILYTYSKOTELO: Sarja toimitetaan muovisessa säilytyskotelossa, jossa on tunnistusosoittimet nopeaa profiilin tunnistamista varten, mikä on loistava lisä reitittimen työkalupakkiin. LAAKERIT & EI-LAAKERIT: Sarja sisältää laakeriohjatut leikkurit reunaprofilointityöhön ja ei-laakeroidut leikkurit käytettäväksi aitojen, ohjausholkkien, mallien ja suoristeiden kanssa. KESTÄVYYS: Jokaisessa leikkurissa on kiinteät volframikarbidin leikkuureunat, jotka lisäävät suorituskykyä ja kestävyyttä massiivipuu- ja levymateriaaleissa, kerroksissa ja MDF-levyissä. YLEINEN 1/4 TUMAN VARSI: Nämä jyrsimen terät ovat 1/4 tuuman varren halkaisijaltaan yhteensopivia useimpien reititinmallien kanssa. Ihanteellinen aloitussarja 1/4 tuuman varsireitittimille. MONIPUOLINEN LEIKKURIVALINTA: Tämä 12-osainen jyrsinteräsarja tarjoaa suosittuja TCT-teriä koriste- ja rakennuspuuntyöstöön hienoista huonekaluista pieniin puusepäntöihin.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Trend Enterprises
Color	‎Black/White
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 1,657 ratings 4.6 out of 5 stars
Included Components	‎1x SET/SS8X1/4TC
Is Discontinued By Manufacturer	‎No
Item model number	‎SET/SS8X1/4TC
Item Package Quantity	‎1
Item Weight	‎1.25 pounds
Manufacturer	‎Trend
Material	Tungsten Carbide
Material	‎Tungsten Carbide
Measurement System	‎Metric
Number Of Pieces	‎1
Part Number	‎SET/SS8X1/4TC
Power Source	‎Hand Powered
Product Dimensions	‎7.28 x 9.13 x 2.05 inches
Size	12 Piece Set
Size	‎12 Piece Set

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: mike kass

Good value

I was reluctant to buy these router bits. But I didn’t want to spend $200+ on the cmt bits. I saw a review on you tube and the guy had decent things to say about the trend bits. I have test four how them on pine. No burning good smooth cut. I did have one bit slide In the Collett. Not a big issue. For the money you can’t go wrong

Scritto da: James W Smetana

Broke the first time using

I purchased this set on Nov. 30, 2019. Today, Nov. 29, 2020 I had a project that required using the 1/4" Straight bit. I drilled a hole in the plywood since I do not have a plunge router base for my Porter Cable 890 router. The first circular pass went well. I was routing less than 1/4" into 3/4" plywood. Upon lowering the bit I proceeded to route a second pass, again this time less than 3/16" in depth. The bit lasted at best 5 inches before it broke off inside the collet. Needless to say, I waited far too long to even attempt to use these bits to ask for a return/refund. I will attempt to contact the supplier to see if they will stand behind their product. Not holding my breath. Update:Dec.8,2020. I received an email today from Trend stating that a replacement bit is being sent. They do stand behind their product.!!

Scritto da: O. AL BUGEAEY

Nice bits

Nice set.. I need a project to test them out..

Scritto da: Amazon Customer

Cheap

I ordered another set thinking the first one that showed up just like this was just a fluke but this is the second set that I've received it looked just like this. Buyer beware

Scritto da: Aleksandr Serstjuk

good quality for good price

good quality for good price

Scritto da: Stephen2k1

Disappointed Trend quality control (dangerous)

The media could not be loaded. Diy'er who buys for quality over price. Trend TCT 24pc router starter set. The router bit I had been waiting for in the set arrived with bent shaft. Had I not inspected it first, used in router, it would have been very dangerous at the high speed a router works at. It would no doubt throw the router all over the place as well as destroy the workpiece. Shame on Trend. Would not expect this even from a cheep router set. However, Amazon sending replacement set without quibble, top marks, so here's hoping it's a one off from Trend. The rest of the router bits seem very sharp, well made and good storage case.

Scritto da: Paul Howarth

Good price

These do fine for the sort of work I do, find they go dull fairly quick. If I wanted absolute precision I would buy a better quality product.

Scritto da: costache mihai

Good product, just the box damaged

Good product but the box's glass is not very strong and actually came broken.

Scritto da: P.F

Value for money

Arrived with the very fragile see through panel completely broken and all the bits loose. Used the 1/2” 6.3mm bit to test a new Makita router and it snapped in 3 seconds! Tried a couple of other bits and they seemed ok. Returned for a refund. Purchased the 35 piece 1/2” set as it works out very good value. A little nervous about the strength of the thinner bits.