0
0

TYÖPAJA Märkä-/kuivaimuritarvikkeet WS25021A 13 jalkaa märkä/kuivaimuletku, erittäin pitkä 2-1/2 tuumaa x 13 jalkaa lukittava märkä-/kuivaimuriletku märkä-/kuivaimureihin

Brand:WORKSHOP Wet/Dry Vacs

3.7/5

103.71

TUOTTEEN KUVAUS Olitpa sitten yrittämässä estää taaperoa avaamasta kellarin ovea, lisäämällä houkuttelevia ja toiminnallisia parannuksia vaatekaapin oviin tai kiinnittämällä kaappeja asuntoautoosi, Defender Security U 10306 Surface Bolt on monipuolinen lukitusratkaisu. Helposti asennettava ja kestävästä massiivisesta messingistä valmistettu 4 tuuman pitkä pintapultti voidaan asentaa vaaka- tai pystysuoraan, ja se sisältää pinta-asennuspidikkeen ja upotustyylin pitimen, joka sopii useisiin sovelluksiin. Satiinisen nikkelipinnan ansiosta pintapultti ei ole vain tehokas, vaan se on myös houkutteleva. Se on loistava vaihtoehto perinteisille lasten (ja lemmikkieläinten) suojatuotteille, joita voi olla vaikea asentaa eivätkä ne täydennä kotisi sisustusta. Voit asentaa pintapultin uteliaiden pienten käsien ulottumattomiin, joten vauvat, taaperot ja pienet lapset eivät pääse sisään tai poistumaan vaarallisista alueista tai kulkemaan kaappien ja kaappien läpi ilman valvontaa. VALMISTAJALTA Tämä liukupultti on valmistettu massiivisesta messingistä ja se on päällystetty satiininikkelillä. Se sisältää 2 erilaista pidikettä pinta- tai uppoasennuksiin. Käytetään ulko-ovissa tai kaapeissa.

Yksiköitä ei ole saatavilla
Märkä-kuivaimuletku sopii useimpiin myymäläimureihin, joissa on vakiona 2-1/2 tuuman tuloaukko. Halkaisijaltaan 2-1/2 tuuman tyhjiötarvikkeet mahdollistavat suurempien roskien keräämisen ja maksimaalisen ilmavirran. Lukituskieleke mahdollistaa märkäkuivaimuletkun irrotuksen helposti säilytystä varten toisin kuin jotkin liikkeen imuletkut. Mukana tulevia sovittimia käyttämällä tämä märkä-kuivaimuletku sopii useimpiin myymäläpölynimureihin, joissa on vakiona 2-1/2 tuuman tuloaukko, mukaan lukien WORKSHOP-märkä-/kuivaimurit. 2-1/2-tuumainen x 13-jalka Lukitusletku tarjoaa laajemman ulottuvuuden, ja lukituskieleke pitää letkun liitettynä märkä-kuiva-imuriin käytön aikana. Märkä-kuivaimuletku sopii useimpiin myymäläimureihin, joissa on vakiona 2-1/2 tuuman tuloaukko. Halkaisijaltaan 2-1/2 tuuman tyhjiötarvikkeet mahdollistavat suurempien roskien keräämisen ja maksimaalisen ilmavirran. Lukituskieleke mahdollistaa märkäkuivaimuletkun irrotuksen helposti säilytystä varten toisin kuin jotkin liikkeen imuletkut. Mukana tulevia sovittimia käyttämällä tämä märkä-kuivaimuletku sopii useimpiin myymäläpölynimureihin, joissa on vakiona 2-1/2 tuuman tuloaukko, mukaan lukien WORKSHOP-märkä-/kuivaimurit. 2-1/2-tuumainen x 13-jalka Lukitusletku tarjoaa laajemman ulottuvuuden, ja lukituskieleke pitää letkun liitettynä märkä-kuiva-imuriin käytön aikana.
Batteries Included? ‎No
Batteries Required? ‎No
Brand WORKSHOP Wet/Dry Vacs
Color Black
Color ‎Black
Country of Origin ‎Mexico
Customer Reviews 4.6 4.6 out of 5 stars 2,504 ratings 4.6 out of 5 stars
Included Components ‎2-1/2 in. x 13 ft. Locking Hose, 2 Locking Adapters, 1 Friction Fit Adapter
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 13 x 2.5 inches
Item model number ‎WS25021A
Item Package Quantity ‎1
Item Weight 2.64 Pounds
Item Weight ‎2.64 pounds
Manufacturer ‎Emerson Tool Company
Material Polyethylene
Material Polyethylene (PE)
Material ‎Polyethylene
Part Number ‎WS25021A
Power Source ‎hand_powered
Size ‎13'
Style ‎Hose
Warranty Description ‎No Warranty

3.7

13 Review
5 Star
75
4 Star
16
3 Star
6
2 Star
1
1 Star
3

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: david groschen
Fit perfect on my rigid shop vac
Using now works great
Scritto da: AMM
Great fit for Rigid WD12701
Just got it today and swapped it out with my existing hose in less than 30 seconds. I love that the longer length of the hose will allow me to stand on my ladder and vacuum overhead vents now without have to precariously carry a smaller shop vac up on the ladder with me. The connectors are good, solid, hard plastic. The hose itself feels like a lighter plastic than the original hose that came with it. But hey, maybe plastics have gotten lighter since the original shop vac purchase. IDK. Time will tell on durability. So far so good, though.
Scritto da: Kindle Customer
It seems sturdy enough
Definitely this is better than having a broken old hose... It seems sturdy while flexible enough to avoid cracking. It's too long for my needs, but I am satisfied overall with this purchase
Scritto da: walla2k5
Fits Craftsman
Good replacement hose, fit my older Craftsman vac perfectly. 13' hose length is the real highlight, highly recommend.
Scritto da: Jami V.
Great fit for my Rigid shop vac.
I am a contractor and always struggled with vacuuming a ceiling for dust. I would always have to get a worker help me and lift up the entire vacuum to cut a hole for a can light. Not any more. Also you can vac a much greater area without having to yank on the vaccuume and having it bang into a wall. Seems pretty durable and the clips at the ends keep it attached to the vac.
Scritto da: pissed off buyer
cheap
cheap
Scritto da: S. Josie
Fits
This is what I needed for my 10+ year old Rigid wet vac. Fits perfectly once I changed the connection end (which was easy to do).
Scritto da: Benedetto Franzoso
Close to OEM quality
For the quality and adapters provided it is an excellent product
Scritto da: José Manuel Blanco Quihuis
Que era exactamente lo que buscaba
Satisfizo mi necesidad. La coloqué entre mi sierra de mesa Dewalt y un aparato de los llamados ciclones (separador de partículas) colocado sobre mi aspiradora para seco y mojado. Dado que tiene 13 pies de largo, permite que ambas cosas queden con suficiente distancia para maniobrar piezas grandes de madera
Scritto da: Robert Thomas Bertram
hose would attach directly to my other hoses and fittings
The hose fittings were all too big for to fit directly onto my existing fitting and hoses. I had to order 2 sets of fittings that had to be put into place between the hose and my other hoses and fittings. It took quite awhile waiting for other fittings.
Scritto da: Al
Perfect workshop extension hose
I bought this 13' hose to be the main hose in my garage vacuum dust separation system and it does it's job perfectly. It's as solid as the original hose that came with the vac but it is much longer so I don't need to move my dust collection system around to clean up my garage. Great hose at a great price. Fits well with my Ridgid vacuum system and with all the extra adapters it comes with it should work well with any wet/dry vac system.
Scritto da: Eric M.
Too expensive for the quality
I am not totally happy with this product. It was delivered with a few flaws such as kinks and dingc. I compared it to the one that came with my vaccum system sided by side and you can see how cheaply made it is. This one was cheaply molded on both sides and joined together. I feel that after a few bends of the hose that it may start cracking or separating. I have not tried it on my machine yet so at the moment I will give it a 3 as I think for what it is it is way overpriced. I don't think I will purchase again.
Scritto da: Martin Daytona
Works Great!
Fit my Craftsmen Wet Vac like a Glove. Love the extra length compared to the 7' hose that came with it. This hose is actually way more flexible than the one that came with it as well. Thought it was a bit expensive, but that's life nowadays. Works Great!

Liittyvät tuotteet

hot
DEWALT DWV9190 Suuri letkusovitin, musta
3.5/5

€ 56.41

DEWALT DWV9190 Suuri letkusovitin, musta
3.5/5

€ 56.41

hot
Woodstock W1049 suuri pölynerotin
3.1/5

€ 176.50

Woodstock W1049 suuri pölynerotin
3.1/5

€ 176.50

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array