0
0

Armacost Lighting 133210 Ribbon Flex Pro 12 voltin valkoinen teippivalo 120 LEDiä/metri, 8,2 jalkaa, 2700K 8,2 jalkaa 2700K

Brand:Armacost Lighting

3.8/5

86.12

Armacost Lightingin RibbonFlex Pro LED Tape Light on täydellinen LED-valonauha matalajännitteisiin, energiatehokkaisiin korostusvalaistusprojekteihin. Nämä LED-nauhavalot on suunniteltu täyttämään valaistusammattilaisten asettelua ja asennusta koskevat vaatimukset, ja niissä on korkealaatuisia, ammattitason komponentteja, jotka kestävät pidempään ja luovat ensiluokkaisen ilmeen.12 V:n nauhavalot on helppo asentaa, ja niissä on 3M-liimautuva tausta. pysyvä pito. LED-valoteippi on ihanteellinen moniin sovelluksiin, mukaan lukien kaapin alla, kattovalaistukseen, varvaspotkuihin, matkailuautoihin, veneisiin, matkailuautoihin ja liiketiloihin. RibbonFlex Pro LED Tape Light on osa Armacost Lightingin korkealaatuista komponenttipohjaista järjestelmää, joka on suunniteltu räätälöityihin asennuksiin.

3M-liimautuva tausta: Kaikissa RibbonFlex Pro 2835 LED Tape Light -valoissa on irrotettava 3M-liimautuva tausta, joka takaa pitkäkestoisen ja pysyvän pidon. Energiatehokas: LED-nauhavalot käyttävät 12 voltin pienjännitevirtaa (virtalähde myydään erikseen), mikä tekee liuskavaloista poikkeuksellisen energiatehokkaita. Pitkäkestoinen: Arvioitu 65 000 tunnin jatkuvaan käyttöön. Helppo asentaa: Kuori ja kiinnitä teippivalo tai leikkaa ja liitä uudelleen mukautettuja asennuksia varten. Ammattilaatuiset LED-nauhavalot: Alan johtavalla käyttöiällä ja suuremmalla valoteholla tämä on täydellinen LED-ratkaisu arkkitehtoniseen LED-valaistukseen, kaapin alla, kattovalaistukseen, varvaspotkuihin, matkailuautoihin, veneisiin, matkailuautoihin ja kaupallisiin valaistusprojekteihin.
Batteries Required? ‎No
Brand Armacost Lighting
Brand ‎Armacost Lighting
Color 2700K
Color ‎2700K
Color Temperature 2700 Kelvin
Color Temperature ‎2700 Kelvin
Control Method ‎App
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 53 ratings 4.7 out of 5 stars
Included Components
Item Dimensions LxWxH ‎98 x 0.38 x 0.06 inches
Item model number ‎133210
Item Package Quantity ‎1
Item Weight ‎3.48 ounces
Light Color White
Light Color ‎White
Light Source Type LED
Light Source Type ‎LED
Manufacturer ‎Armacost Lighting
Material Copper
Material ‎Copper
Mounting Type ‎Adhesive,Ceiling,Under Cabinet
Number of Items ‎1
Number of Light Sources ‎120
Number Of Pieces ‎1
Occasion Christmas
Occasion ‎Christmas
Part Number ‎133210
Power Source DC
Power Source ‎DC
Product Dimensions ‎98 x 0.38 x 0.06 inches
Shape ‎Straight
Size ‎8.2 ft
Style 120 LED/m
Style ‎120 LED/m
Theme Indoor
Theme ‎Indoor
Usage ‎indoor use only, Under cabinet lighting, cove lighting, accent lighting, led lighting
Voltage ‎12 Volts
Warranty Description ‎Limited 3 year warranty.

3.8

8 Review
5 Star
84
4 Star
11
3 Star
3
2 Star
0
1 Star
3

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: S. Martin
Works great
Glad I went with the 120 LED version as it rivals the brightness of the halogen that it replaced even when mounted in the aluminum channels with diffuser. The dimmer switch tames the brightness when needed. I would have been disappointed if the maximum brightness was less. I had about six feet of led on either side of the transformer and didn't experience any significant voltage drop and I used 20ga wire.
Scritto da: John
Great lights
I used these lights as kitchen undercounter lights. They are as bright as one might ask for. My only disappointment is that the color is not variable. They are 4,000 degrees while the overhead lights in the kitchen have five variable light colors, ranging from 2,700 to 5,000. Nevertheless, these are great lights.
Scritto da: James M.
NICE LIGHTS
THESE ARE VERY NICE LIGHTS AND BRIGHT I INSTALLED UNDER MY NEW KITCHEN CABINETS AND THEY LOOK AMAZING AND SO FAR THE ADHISIVE THAT IS ON THE LIGHTS HAVE HELD UP THERE NOT FALLING OFF THE BOTTOM OF THE CABINETS AND I ALSO STUCK THEM ON THE GRANITE COUNTERTOP UNDER THE ISLAND OVER HANG AND STILL HOLDING UP
Scritto da: VB
Generally satisfied, the closer spacing of the LEDs makes for uniform lighting.
First experience with LED strip lights. Mostly positive experience. The 2700K is very warm, I expect going to 3000K would have been better in my case. I think that if the light is going to be truly indirect the bouncing may cause the harshness of the whiter color ranges to mellow. The strip is very narrow, which make placement easier but if you solder the wiring it can be tight. The spacing on the solder points is around 18 inches which can be annoying. My installation has then adhered at 45 degrees on the ceiling. Inspecting after two weeks had a few spots where the adhesion was failing, but its possible I didn't thoroughly press the entire strip during install. They are adhering to mdf painted with primer.
Scritto da: Crimsoncascade
Good for undercabinets but not bigger jobs
I did a project of using the Armacost large transformer and about 28 feet of this Armacost 120-LED ribbon. The project was to replace a long set of flourescent fixtures that were indirectly lighting my midcentury modern ceiling. (In the past, I used some of this to do undercabinet lighting in a laundry room.) I would never attempt this again. For undercabinet, this works well as long as you have someplace to put the transformer! But for this big job, several unexpected issues arose. First off, the ribbon is very hard to work with at long length. I found the adhesive doesn't stick well, the ribbon doesn't like to stay flat, it smells yukky, and even the 120-LED ribbon really isn't bright enough to do much other than accent lighting for a ceiling. It's very bright when you're 2 feet away, like a kitchen counter under a cabinet, but the light doesn't seem to go much farther than that. Also, the transformer and the ribbon LED's get crazy hot very quickly. I'm not confortable taping the ribbon at this heat level to wood, so I had to rig up using a metal molding -- tons of work I wish I had never gotten involved with. Also, at longer lengths, you can see that Armacost recommends you put the transformer in the middle of the run. That meant I had to extend my house wiring -- what a pain. I feel silly that I didn't just buy a few linkable 4 or 8 foot LED fixtures that run around $30 apiece and plug into an outlet (or hard wire) at one end. (I used these in my shop room and they installed in minutes and work fine though are not dimmable.)
Scritto da: Erik Pearson
Expensive, but worth it.
I bought the 33' version, cut it into 2 strips and soldered them in series as shown in the picture. It puts out plenty of light using the Armacost 60watt power supply (sold separately) . I went with the dimming power supply and it works like a charm with a Lutron Diva switch. I shopped around and this appeared to be the best/brightest/dimmable LED strip around.
Scritto da: Scott S.
Great light
High density led tape puts out great light
Scritto da: Gary Reid
Easy to install with a great finished look
Used as under-cabinet lighting these work very well. The 120 LED per meter version provides a lot of light for food prep and, if used with a dimmer, can provide a nice ambience at night when regular room lighting isn't necessary.

Liittyvät tuotteet

hot
Westek MRGO-L22W-N1 valo, alumiini
2.8/5

€ 49.61

Westek MRGO-L22W-N1 valo, alumiini
2.8/5

€ 49.61

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array