0
0

BOSCH TC100 5/32 tuumaa. x 3-1/2 tuumaa Litteävartinen kuusiokoloinen muurausporanterä 3-1/2 tuumaa

Brand:BOSCH

2.6/5

27.38

TUOTTEEN KUVAUS BOSCHin metalliporanterät tarjoavat ratkaisun jokaiseen ammattikäyttöön. Jokainen terä on valmistettu vaativien eritelmien mukaan, ja siinä on jakopiste, joka alkaa kosketuksessa ilman kävelyä tai luistelua, mikä eliminoi keskirei'ityksen tarpeen. BOSCHin mustaoksidikärjet tarjoavat erinomaisen kestävyyden, nopeuden ja valikoiman useimpiin yleisiin sovelluksiin. VALMISTAJALTA Boschin betoniruuvi- ja ankkurointijärjestelmä sopii täydellisesti betoni- ja muuraustarpeisiisi! Sähköasentajat, putkimiehet ja remontoijat käyttävät näitä järjestelmiä päivittäin kiinnittäessään ruuveja tiiliin, betoniin ja lohkoon. Kun järjestelmää on käytetty messuilla ja kenttätesteissä, käyttäjät ovat innoissaan tästä tuotteesta. He olivat vieläkin innoissaan, kun he saivat tietää, että Bosch tulee saataville. Olemme ensimmäinen nimi, jonka he ajattelevat ostaessaan vasaraporaa tai kovametallia, joten se on luonnollinen istuvuus.

Kuusiokoloinen terä sopii kuljettajan holkkiin. Käytetään muurattujen kiinnitysjärjestelmien / kuusioholkkikäyttötyökalujen kanssa. Litteä varsi estää terän liukumisen. Korkealaatuinen kovametallikärki pitkää käyttöikää varten.
Batteries Included? ‎No
Batteries Required? ‎No
Brand BOSCH
Brand ‎BOSCH
Color ‎Black
Country of Origin ‎China
Customer Reviews 3.6 3.6 out of 5 stars 39 ratings 3.6 out of 5 stars
Finish ‎Black Oxide
Finish Type Black Oxide
Finish Type ‎Black Oxide
Included Components ‎Unit^Instruction Guide
Is Discontinued By Manufacturer ‎No
Item model number ‎TC100
Item Package Quantity ‎1
Item Weight ‎0.48 ounces
Manufacturer ‎Bosch
Material Carbide
Material ‎Carbide
Measurement System ‎Inch
Part Number ‎TC100
Shank Type Hex
Shank Type ‎Hex
Size ‎3-1/2-Inch
Surface Recommendation ‎Metal
Tool Flute Type Straight
Tool Flute Type ‎Straight
Warranty Description ‎No

2.6

11 Review
5 Star
41
4 Star
14
3 Star
22
2 Star
7
1 Star
16

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: DC
So tough it drills through rock
This is an excellent bit. I used it with a hammer drill to secure landscape lights to a large rock formation I have in my driveway. I'm not sure what kind of rock it is, but I've been told it might be bluestone, so it's very hard. The mount for these lights require 3 drilled holes in the rock. For the first 2 lights, I went through 2 Tapcon drill bits, and 2 cheaper Bosch carbide drill bits I had in my tool box. All 4 of those snapped pretty easily. I bought 3 of the Bosch TC100 since I had 1 more light to install and I was afraid these would snap as well. Turns out I only needed 1. This bit went through the rock very easily (slow and steady), and I was even able to drill a few more holes with it to route the landscape wire around the formation. Very happy with this purchase.
Scritto da: Ryan Matthews
Works Really Well - Buy Several for a Big Job
This bit worked really well for digging pilot holes for concrete screws in my home's brick facade. I drilled four holes and the bit was already starting to work a little slower. I think that's just part of drilling through a solid wall and no fault of the bit. I'd say if you are drilling more than maybe five holes, you may want to get more than one.
Scritto da: stennisdog
OK
Average product
Scritto da: David
worked great
did what it was supposed to do, it drilled into concrete.
Scritto da: Kindle Customer
Price is reasonable
It was a "add on". Have not used it, but am familiar with the brand.
Scritto da: SK Wire
AHHHH...no more fighting with the hammer drill!
Not much to say here, I bought a cheaper brand and was starting to have issues when using the bits in my masonry drill. I hooked this up to my dewalt hammer drill and I am installing tap cons like butter! One suggestion is to realize that the length is only 3.5"s. This was great for me as I was using short screws, however may not fit all applications.
Scritto da: R. Iser
The second lasted 1 1/2 holes so for me I do NOT recommend these bits
I ordered two of these figuring I had to make 12 holes in cement. I made 3 hole's with the first one before it had no point on it. The second lasted 1 1/2 holes so for me I do NOT recommend these bits.
Scritto da: Chris
effective
Worked great to drill thru ceramic tile into concrete subfloor.
Scritto da: Alex
very good
I loved it. I used it to drill holes in my basement concrete after my first one broke. i used this one for the rest of work and its still in my tool box.
Scritto da: richard hamilton
did the job
the way they drilled in to cement
Scritto da: cec
Five Stars
b

Liittyvät tuotteet

hot
DEWALT DWADT1024 UNC-porantappi, 10-24
3.3/5

€ 31.89

DEWALT DWADT1024 UNC-porantappi, 10-24
3.3/5

€ 31.89

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array