CURT 40053 ruostumattomasta teräksestä valmistettu vetokoukkupallo, 6 000 lbs, halkaisija 2 tuumaa, 1 x 2-1/8 tuuman varsi

Name: CURT 40053 ruostumattomasta teräksestä valmistettu vetokoukkupallo, 6 000 lbs, halkaisija 2 tuumaa, 1 x 2-1/8 tuuman varsi
Brand: CURT
SKU: 0612314153008
Price: 74.66 EUR
Availability: InStock

Brand:CURT

3.8/5

€
74.66

TURVALLISUUS TESTATTU. Korkeimman turvallisuustason edistämiseksi hinauksen aikana tämä CURT-hinauskuula on testattu Yhdysvaltain VESC-määritysten mukaisesti. TURVALLINEN ASENNUS. Luotettavan lujuuden takaamiseksi tässä perävaunun vetokuulassa on sinkitty kuusiomutteri ja kierteinen lukkoaluslevy. Siinä on myös hienot kierteet, jotka parantavat kuulakiinnityksen pitoa (250 lb.-ft. vääntömomentti vaaditaan). KORROSION KESTÄVÄ. Tämä vetokuula on valmistettu ruostumattomasta teräksestä, mikä takaa erinomaisen kestävyyden sadetta, mutaa, tiesuolaa ja muita syövyttäviä uhkia vastaan. TARKKA SOPIVUUS. Tämän vetokoukun kuulan halkaisija on 2 tuumaa ja se sopii lähes mihin tahansa 2 tuuman liittimeen. Pallonvarren halkaisija on 1 tuuma ja sen pituus on 2–1/8 tuumaa, jotta se voidaan kiinnittää turvallisesti perävaunun vetokoukun kuulakiinnikkeeseen. LUOTETTAVA VAHVUUS. Tämä perävaunun vetokoukku on mitoitettu vetämään jopa 6 000 puntaa perävaunun kokonaismassaa. Se on valmistettu korroosionkestävästä ruostumattomasta teräksestä luotettavan vetovoiman ja varmuuden takaamiseksi edessä olevalla tiellä.

Määrä

Lisää ostoskoriin Osta nyt

EAN: 0612314153008

Luokat Automaattiset tuotteet, Asennustarvikkeet, Pukkeilutuotteet & vinssi, Kytkentäkuulat,

Brand	CURT
Brand	‎CURT
Country of Origin	‎Taiwan
Customer Reviews	4.7 4.7 out of 5 stars 471 ratings 4.7 out of 5 stars
Exterior	‎Painted
Finish Type	Polished
Is Discontinued By Manufacturer	‎No
Item model number	‎40053
Item Weight	‎2.41 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎40053
Material	FORGED STEEL
Model	‎2" Trailer Ball
OEM Part Number	‎40053
Product Dimensions	‎5 x 2 x 2 inches
Vehicle Service Type	Pickup Trucks, Marine-Personal-Craft, ATV, Sport-Utility-Vehicles, Snowmobile, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: Mike A

High quality ball

Had a nice smooth finish unlike some other matte or milled ones I’ve seen. Not mirror polished, but smooth. My only beef is that the nut and washer were plated instead of SS. Kept it because it’s usually the ball that rusts anyway.

Scritto da: Prime3

Nice hitch.... with cheap zinc-plated hardware??

The ball itself is nice and appears to be actual stainless. But then they include a cheap zinc-plated washer and nut... wtf? The washer and nut are going to rust and defeat the whole purpose of getting the stainless ball.

Scritto da: L_R_G

Ditch that rusty hitch!

I installed this ball on an old stainless mount I had laying around from a previous vehicle. This ball is very high quality with a high load rating. I've used it for a few months now and it's still in fantastic shape and absolutely zero rust on it. Rusty balls are the worst. Pick one of these up and enjoy.

Scritto da: Waddie

a little pricey on Amazon.

About $10 higher on Amazon than the online trailer store, but faster delivery with Prime. Great hitch ball, and won't rust, but the washer and nut aren't stainless, so they do eventually rust. I sprayed the washer and nut with some clear enamel after installing the hitch ball. That should slow down the corrosion. I don't know why the washer and nut aren't made of stainless; cost cutting I suppose. I know of no practical reason a stainless steel nut can't go on a stainless steel bolt.

Scritto da: Yachtshot

No rust so far.

I use it a lot and it may be discolored there's no rust. I'm using it with aluminum receiver and company says the two metals will not conflict.

Scritto da: KP Texan

Great ball which stands up to corrosion better than most others!

Have had this on my Curt ball mount for several years now, and it's still in great shape. Although I don't do much towing, I bought it back when I lived on the coast since I've seen what the salt air/water/sand does to a standard ball in short order. Although not stainless steel, the nut and lock washer still look great. I have no issue with the Zinc coated nut/lockwasher due to the mentioned galling issues, and besides, that's not the part of the ball that needs to be stainless. The fact is that no coating will last on a ball under towing conditions, so if you want it to stay decent looking then the ball needs to be a solid, rust resistant material, which this one is.

Scritto da: B-town Yocal

Cheap quality nut.

Ball and shank appears to be of good quality, but the nut appears to be of cheaper quality, or at least non stainless. You can see the metal differences in the ball and shank vs. the nut & washer. Issue? No, not really. It might freeze up years down the raod, but I don't take mine off anyway. Next time, I'd probably want to feel one in my hands before buying. It'd be nice when they describe as "stainless" that all the parts are actually "stainless". I'd buy this again, if the price were a little cheaper.

Scritto da: DAVID C.

No more rusty balls!!

Who wants a $50,000 pickup truck with a rust covered trailer ball -- really! C'mon guys, spend the extra 10 bucks.

Scritto da: Profhot

Bel effet pour longtemps

Qualité, beauté et terminé la rouille

Scritto da: DizzyNinja

Four Stars

No rust so far but barely used in one winter

Scritto da: Shimon

Five Stars

Like everybody said, the ball is exceptional, but nut is not stainless steel

Scritto da: Amazon Customer

Not all in stainless

Always need to read everything… very disappointed that not every parts aren’t in stainless…

Scritto da: Kelly A

I am disappointed in Curt Mfg

I ordered two of the 40053 Stainless Trailer Balls in the same Amazon order. One of them was all stainless, in a matte finish, with stainless nut and lock washer. That one I rate 5 stars. The second one ended up polished, and had a non-stainless washer and nut. I sent it back and the replacement was exactly the same. 1 Star for that inferior product. I am disappointed in Curt Mfg. Obviously they have changed the alloy, the polish, and the washer/nut combination. The collective changes decrease the quality of the item and I see many others share my concerns. Both types of ball were model 40053. *update* I contacted Curt Mfg. about my concerns and they have chosen not to respond. It has been 5 weeks with no response. There are many other companies to deal with out there, and it is unfortunate that a formerly excellent company has cut quality for the bottom line. I see the ball has Made in China on the tag.