CURT 51498 7-tie RV Blade Perävaunun jarrusäätimen testeri

Name: CURT 51498 7-tie RV Blade Perävaunun jarrusäätimen testeri
Brand: CURT
SKU: 0612314514984
Price: 738.31 EUR
Availability: InStock

Brand:CURT

3.3/5

€
738.31

PITKÄKESTOINEN. Luotettavaa käyttöä varten kausi toisensa jälkeen tämä sähköinen perävaunun jarrusäätimen testeri on valmistettu korkealaatuisista, kestävistä komponenteista. HELPPO KANNETTAVA. Tämän perävaunun jarrusäätimen testerin päällä on kantokahva, jonka avulla voit helposti siirtää laitteen liikkeestäsi autotalliin ajoneuvoosi tai minne tahansa tarvitset sitä. 20 JALAN JOHDOT. Tässä jarrusäätimen testerissä on 20 jalan johto, joka on varustettu tavallisella 7-suuntaisella RV-terän liittimellä. Tämän avulla voit kytkeä testerin ajoneuvosi 7-napaiseen pistorasiaan ja testata sähkötoimintoja kuljettajan istuimelta. YKSINKERTAINEN KÄYTTÖ. Tämä jarrusäätimen testeri tarjoaa jokaista sähkötoimintoa varten merkkivalot, helposti luettavan volttimittarin ja virtamittarin. MONIPUOLINEN. Varmista nopeasti ja varmasti perävaunun jarrusäätimen ja ajoneuvon perävaunun johtosarjan toimivuus. Tällä jarrusäätimen testerillä voit testata akun jännitettä, jarrujännitettä, signaalipiirejä ja jarrusäädintä.

Yksiköitä ei ole saatavilla

EAN: 0612314514984

Luokat Automaattiset tuotteet, Asennustarvikkeet, Pukkeilutuotteet & vinssi, Vetokoukut Lisävarusteet, Johdotukset,

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 6 ratings 4.2 out of 5 stars
Exterior	‎Painted
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	12 x 10 x 7 inches
Item model number	‎51498
Item Weight	12 Pounds
Item Weight	‎12 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎51498
Model	‎Brake Control Tester
OEM Part Number	‎BKDK51498
Power Source	Battery Powered
Product Dimensions	‎12 x 10 x 7 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: CAPT Seabee

Works Well But Needs Design Change

Had the brakes stop working on my flatbed so invested in this unit to start the troubleshooting process. First, the unit isn't designed to withstand individual shipping in a normally packed box. It has six current sumps in 3 pairs to emulate the load the brakes would put on. These are dense heavy units attached with a flimsy riveted stud and screw to the thin metal case. One was sheared completely with the current sumps flying about the box. So stop trying to be fancy and just attach with 1/4 inch bolts, fender washers, and lock nuts, which I did. The unit showed the vehicle controller was working fine. Cord length is ample so you can run and see everything from the driver's seat. So I'm glad I have this unit even though it won't get used frequently. I'd recommend a vehicle check every spring with one for sure. 4 stars with one marked down for poor construction.

Scritto da: JOHN FERRELL

Needs a better build, works as stated.

Great tool, however... When it was shipped to me then brake magnets with in the case pulled loose from the casing and were freely moving around. In my opinion they are not well secured to begin with. I resecured them with bolts, nuts, and washers. I was not in a position to return it and wait for a replacement. Honestly I believe I'm better off with my repair of the tool. I would have award 4 or 5 star rating if that issue had not occurred. Aside from that it works rather well and I do recommend it.

Scritto da: Amazon Customer

Turns out controller was bad and wasn’t putting out enough amperage

Wish I would have bought this sooner. Chased a trailer brake issue for a week, ended up being the truck. Tested the connection on the truck with a test light and it lit up so I didn’t thing there was an issue there. Turns out controller was bad and wasn’t putting out enough amperage. Figured it out after I tore apart the trailer brakes. This is a must if you tow a lot of different trailers.

Scritto da: Amazon Customer

Five Stars

works very good