0
0

CURT 56020 ajoneuvon puoleinen mukautettu 4-nastainen perävaunun johtosarja, sopii tiettyihin Ford E-150, E-250, E-350 Super Duty

Brand:CURT

3.6/5

82.75

Jos ajoneuvossasi ei ole perävaunun vetämiseen tarkoitettua johtoa, CURT mukautettu johdotus on ihanteellinen ratkaisu. Mukautettu johtosarja, jota kutsutaan myös T-liittimeksi, on yksinkertainen, plug and play -sähkölaite, joka liitetään autosi sähköjärjestelmään ja tarjoaa tavallisen, yleisen perävaunun johdotuksen. Tämä tehdään käyttämällä kahta tai useampaa ajoneuvokohtaista, OEM-yhteensopivaa liitintä, jotka liitetään takavalokokoonpanoon, mikä eliminoi tarpeen leikata, jatkojalostaa ja juottaa asennuksen aikana. Mukautetut johtosarjat on tehty ajoneuvokohtaisesti, ja vaikka niitä ei ole saatavilla kaikkiin ajoneuvoihin, ne tarjoavat yhden nopeimmista, helpoimmista ja turvallisimmista tavoista kytkeä ajoneuvo hinaukseen. Tämä erityinen pistokesarja sisältää 4-suuntaisen litteän liittimen, ja se on suunniteltu mukautetuksi johtosarjaksi, joka sopii tiettyjen vuosien Ford E150-, E250- ja E350 Super Duty -malleihin (varmistaaksesi ajoneuvosi yhteensopivuuden, katso sovellustiedot). Sen mukana tulee kaikki tarvittavat johdotuskomponentit luotettavan perävaunun johdotuksen muodostamiseksi sekä pölysuoja, joka pitää liittimen puhtaana, kun sitä ei käytetä. Sinulla on mielessäsi kuva seuraavasta määränpäästäsi – ehkä se on suosikkikalastuspaikallesi laskeutuva vene, ehkä se on leirintäalue, josta on näkymät yhdelle luonnon mestariteoksesta, tai ehkä se on seuraava suuri työmaa. Tämän kuvan muuttaminen todellisuudeksi vaatii kuitenkin muutakin kuin pelkkää haaveilua. Se vaatii kiinteän yhteyden ja oikean määrän tehoa. CURT mukautettu johdotus on tehty alan kehittyneimmällä tekniikalla, ja se on suunniteltu asennettavaksi helposti, mikä antaa sinulle pitkäaikaisen sähköliitännän vetokoukun asennukseen.

PÖLYSUOJA. Tämä 4-napainen perävaunun valaisimen johtosarja on varustettu kumisella pölysuojalla, mikä edistää pitkäkestoista käyttöä ja säänkestävyyttä. Se sopii helposti 4-suuntaiseen litteään liittimeen, kun sitä ei käytetä, suojaten sitä ulkoilman vaikutuksilta. HELPPO OTTO. Perävaunun johtojen ja perävaunun valojen kytkeminen on helppoa tämän ajoneuvon pistorasian ergonomisen suunnittelun ansiosta. Sen ylä- ja alaosassa on kielekkeet, jotka tarjoavat paremman otteen, kun kytket perävaunuun tai irrotat sen. AJONEUVOKOHTAISET. Tämä jälkimarkkinoiden ajoneuvoperävaunun johtosarja on suunniteltu Ford E 150-, E 250- ja E 350 Super Duty -mallien tiettyihin vuosiin. VAKIOLIITIN. Tätä 4-tasoista perävaunun johtoa voidaan käyttää yhdistämään perävaunun takavalot, jarruvalot ja suuntavilkut. 4-suuntainen perävaunun valojohdotus on suosittu useissa perävaunuissa, mikä lisää ajoneuvoosi monipuolisia hinausvaihtoehtoja. HELPPO ASENTAA. Ei leikkausta! Ei liitoksia! Tämä perävaunun johtosarja liitetään ajoneuvosi olemassa olevaan tehdasjohdotukseen ja on varustettu tavallisella 4-napaisella takaperävaunun johtoliittimellä perävaunun kytkemistä ja hinaamista varten.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 190 ratings 4.6 out of 5 stars
Exterior ‎Smooth
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎56020
Item Weight 0.71 Pounds
Item Weight ‎11.4 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56020
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56020
Product Dimensions ‎9 x 4 x 3 inches

3.6

11 Review
5 Star
80
4 Star
8
3 Star
5
2 Star
2
1 Star
5

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: Kel
Worked great!
This worked great for my 2008 e350 ford. The instructions didn't work for my passenger model though. I had to follow a video from etrailer, this harness is almost the same as theirs but it doesn't have the long wire for ground (so it's much easier to install).
Scritto da: JDeMattos
Hyperflash on left signal ONLY.
Plug and play harness. Instructions are pretty vague but it’s not rocket science. They essentially “piggyback” off of the stock tail light bulbs. They should label right and left. Thankfully I tested before reinstalling everything and figured out I had it backwards. Right signal works as it should on my van and my trailer but left signal is blinking twice as fast or what’s known as “hyperflash”. All lights are operable so it sure why only one side is flashing faster than the other. Docked a star for that. Other than that, works as it should.
Scritto da: KL
Works but seems poorly planned
We installed this in a 2014 E350. It works well enough and it IS worth it simply for the factory style plugs at each tail lamp. However, the right (green/white) side was too short (at least for how I chose to install it) and the left (yellow/brown) was inexplicably long - VERY long. I actually wound up splicing in about 2' of green and white wire, so you might consider having some green and white primary wire on hand along with some butt connectors. Note the included instructions talk about slitting a grommet but I could not locate said grommet and it was not mentioned in the YT video, either. I was simply able to run through a hole where the taillight wires entered and down behind the plastic trim of the last pillar, then under the kick plate. The hole did not feel like it had any sharp edges and actually felt nicely finished. Now, from the kick plate I took advantage of 2 oval slits next to the door striker. I believe other reviewers have alluded to this as well. I put all 4 wires of this harness in plastic loom to protect them as they pass down through the body. Our vehicle had a tapped hole in this area as well that had a plastic thumb screw of sorts. I used a 3/8" insulated rubber clip around my plastic loom and replaced the thumb screw with a standard M6x1.0 bolt, see pic. You will have to trim some rubber "grips" off the plug to get it thru the oval holes. These are just there for human finger comfort and serve no important purpose. From here I ran the plug under my hitch and again secured the wiring with an insulated rubber clip.
Scritto da: Carlos Carlo
Easy to install and have trailer lights
Not too much to say about this other than it went in easy hooked up easy and works fantastic. One thing I think could be better is a little more detailed instruction and maybe color-coded step by step instruction be nice but not really necessary it's definitely worth purchasing this kit and installing it in your van so you have trailer lights it's pretty cool
Scritto da: James M. Droddy
Perfect fit
Fit perfectly. Just takes some time to install on the van since you have to run the wiring to both lights. However, works perfectly.
Scritto da: Notso
1 tool required
I just needed a hex bit to remove my tail lights then these were plug-n-play. Fantastic kit. Saved me the time of splicing wires etc...
Scritto da: T in florida
Easy to install vehicle trailer harness
The harness was incredible simple to install on a 2013 Ford E-350 full size van
Scritto da: Roger Ferrer
Muy bueno
Muy bueno
Scritto da: mike
Great product
Very simple plug and play ! Highly recommend
Scritto da: GERARD ARSENAULT
nice set up
foul proof 15munute job
Scritto da: Amazon Customer
Easy install and works.
Straightforward to install and worked as expected.

Liittyvät tuotteet

hot

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array