Kegco EBDHCK2-5T Deluxe Homebrew, kaksihana-ovikiinnitettävä Kegerator-muunnossarja 5 lb:n alumiinisella CO2-säiliöllä

Name: Kegco EBDHCK2-5T Deluxe Homebrew, kaksihana-ovikiinnitettävä Kegerator-muunnossarja 5 lb:n alumiinisella CO2-säiliöllä
Brand: Kegco
SKU: 0700697202496
Price: 607.84 EUR
Availability: InStock

Brand:Kegco

3/5

€
607.84

Muuta jääkaappi tai pakastin onnistuneesti tehokkaaksi kotioluen annostelijaksi helposti Kegco Deluxe -kotioluen kaksihanaisen kegeraattorin muunnossarjan ansiosta! Tämän sarjan mukana tulee kaikki tarvitsemasi korkealaatuiset kaupallisen luokan olutkomponentit kaupallisen luokan kaksinkertaisesta hiilidioksidin hallintaan tarkoitetusta säätimestä ruostumattomasta teräksestä valmistettuun tippakaukaloon, joka kerää pisarat ja roiskeet ja helpottaa puhdistusta. Sarjan mukana tulee jopa tyhjä 5 lb. alumiininen CO2-säiliö, jossa on silmiinpistävä kiiltävä punainen pinnoite, joka tarjoaa ylimääräisen suojakerroksen kulumista ja korroosiota vastaan. Tämä sarja on suunniteltu käytettäväksi Cornelius-pallolukituskotihautitynnyreiden kanssa, ja sen mukana tulee kaksi pallolukituskotihauditynnyrin liitinsarjaa, joiden avulla voit annostella jopa kahta tynnyriä samanaikaisesti.

Määrä

Lisää ostoskoriin Osta nyt

EAN: 0700697202496

Luokat Koneet ja laitteet, Teollinen & Tieteellinen, Jääkaapit, pakastimet ja jääpalakoneet, Kegeraattorit,

Sisältää upouuden tyhjän 5 lb:n alumiinisen CO2-säiliön, joka on valmistettu erittäin lujasta alumiiniseoksesta ja jossa on kiiltävä punainen pinnoite, joka toimii ylimääräisenä suojakerroksena korroosiota ja kulumista vastaan. Kahdessa NSF-hyväksytyssä oluthanassa on taotut messinkirungot, joissa on erittäin kiillotettu kromipinnoite, messinkivarsikokoonpanot ja vivut tarttumattomilla pallolevyillä sekä mustat ABS-muoviset hanan nupit. 10 leveä ovinen tippa-allas on selkeä muotoilu ja luotettava ruostumaton teräsrakenne, ja se on helppo asentaa käyttämällä kaksi kätevästi sijoitettua ruuvinreikää backsplashissa. Tämän sarjan mukana tulee kaksi kuulalukkotynnyriliitinsarjaa, joista kummassakin on sekä kaasun sisääntulo- että oluenpoistoliitin, jotta voit helposti napata Cornelius Pepsi -kotikeititynnyreitä. Kestävästi rakennettu tuottamaan tasaisen virtauksen kaatamisen jälkeen, kaksimittaisessa säätimessä on T-tyylinen säätöventtiili, jonka avulla on helppo säätää tynnyrin sisällä olevaa painetta.

Brand	Kegco
Configuration	Door Mount
Country of Origin	USA
Finish Type	stainless steel
Installation Type	Screw In
Is Discontinued By Manufacturer	No
Item model number	EBDHCK2-5T
Manufacturer	Beverage Factory
Model Name	EBDHCK2-5T
Number of Doors	1
Pattern	Solid
Product Dimensions	15 x 15 x 30 inches; 19.25 Pounds
Specification Met	NSF

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: craig

Good

Nice equipment just missing parts

Scritto da: bill dufner

Quality control could use some focus going further!

For me I am disappointed in the kit, yes it is all there! Yes it’s everything you might need. But you will end up replacing what inexpensive parts they have shipped you! I am mot new to the installation of beverage delivery systems! I had this shipped to a remote location to where it would be installed. This location is far from my home and I didn’t want to haul it up. Let’s start with the Good! Pretty bottle, great instructions, shipping was convenient and on time, packing was considerate as to no damage during travel! The bad Co2 lines are nicely color coded, but so incredibly stiff, and bundled so tight one kinked before even unwrapping it from its Sullifane wrap. The finger tightened clamps that come with the kit are so inexpensive they all leaked and I replaced them with a better clamps. The reusable seal on the Co2 had a divit in one side so I didn’t even try to trust it and replaced it with my own seal. The shanks were 2 different lengths for some reason but did have the same product number so probably a manufacturing issue. The ball locks had a bur on the Co2 side at the seam that you could not release from the fitting without it poking you. Again probably a manufacturing issue. Because of Murphy’s law, I anticipated most of the issues based on other reviews. But here is my honest opinion. Put the system together on your own, the faucets, the Sanke, the ball locks, the beverage lines, the Co2 lines. The regulator and shut offs. I knew I was puting too much trust into the name by reading the reviews. I could have done it less expensively and better quality made products. Get an exchange bottle instead of the pretty one! A lot of my issues may seam petty but anything under pressure should get it’s fair amount of attention to detail!

Scritto da: Amazon Customer

The listing for the kit contents is somewhat misleading.

The conversion kit is what I expected for the most part. Except, the kit doesn't completely match the Amazon listing. From the listing I purchased the product : "Includes a brand new empty 5 lb. aluminum CO2 tank made from high strength aluminum alloy with a glossy red coating that acts as an extra layer of protection against corrosion and wear." The product arrived in good condition and all items were as described except the tank. I received the KEGCO standard 5# cylinder, NOT the coated one as described...... I know it's a small thing, but when you make a purchase expecting something, you want what you ordered. I would have reached out to try and exchange just the tank, but Amazon seems only interested in returning complete orders and if there is a resolution process they hide it well. So I eat the 10-15 dollar loss in the value difference of the tank, as I am trying to get my new kegerator conversion up and running. Part of the reason I went with the KEGCO kit was for the sealed tank. I could have scrimped and bought components and put it all together for less like others have mentioned, but I liked the convenience, and the coated tank. Kit Components 4 out of 5. They aren't the top of the line, but they are good enough for a starter kit.

Scritto da: Urbancountryi

initially, I ordered the wrong kit for my husband ...

initially, I ordered the wrong kit for my husband, I contacted the company, they stopped shipment of the incorrect kit, sent us this kit and my husband loves it. I am a former professional beer taster (yes, that is a thing) and my husband wants to up his home brew game. He is in process of building a draft system for both beer and nitro coffee. (and maybe some home made root beer for the kids) Will update once we have everything up and running

Scritto da: Nolan Echols

Missing parts

Kit came in missing the regulator. Easy to put together though. Ordered another regulator while waiting on response from the seller

Scritto da: Joel Harmon

Update, hooked up my tanks

I hooked my tanks up, I think there may be a problem with the regulator?! There were parts missing. This kit is for two taps, and the only hoses I got were for the co2. (Red hose) I ordered the extra hose I needed for an extra $15. And had them the next day. My kit also came with the plain aluminum tank. If I were gonna do it again, I would just piece it together. When you take your shiny new tank in to get it filled they are gonna want to swap it or you may have to leave it till they can get around to filling it. To me, it would have been easier, cheaper, and more convenient to just get the rental, and pay the deposit. Then all you are doing is swapping their bottles. Seals or valves go bad the supply store fixes it, and you just get another bottle and keep pouring. Picking up my kegs tomorrow from my local home brew store. I will try to give you an update, after I find my co2 leak. Hope this helps.

Scritto da: RedGenetics

Works great!

My husband bought this for his shop fridge and loves it! Easy to assemble and set up. Works great!

Scritto da: Danny W.

Five Stars

It seems to be very good quality made a home bar for a wedding came out great