Klein Tools 631M -työkalusarja, magneettiset mutterinvääntimet, koot 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 ja 1/2 tuumaa 3 tuuman täysonttoakselilla, 7-osainen

Name: Klein Tools 631M -työkalusarja, magneettiset mutterinvääntimet, koot 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 ja 1/2 tuumaa 3 tuuman täysonttoakselilla, 7-osainen
Brand: Klein Tools
SKU: 0092644652141
Price: 130.34 EUR
Availability: InStock

Brand:Klein Tools

3.7/5

€
130.34

Klein Tools -magneettinen mutteriväänninsarja sisältää 7 suosituinta mutterinvääntimen kokoa, ja se on täydellinen monenlaisiin sovelluksiin. Näissä mutterinajureissa on magneettiset kärjet ja täysin ontot akselit, jotka liukuvat helposti pitkien pulttien tai pulttien yli. Kleinin patentoitu Tip-Ident auttaa nopeasti tunnistamaan mutterin kiristimen ja koon työkalupussissa tai pussissa. Klein Tools on yli 160 vuoden ajan valmistanut korkealaatuisia, ammattitason käsityökaluja, jotka tarjoavat suorituskyvyn, kestävyyden ja tarkkuuden, joita tarvitaan työn suorittamiseen oikein. Perheemme insinöörit, työntekijät ja käsityöläiset panevat edelleen kuuden sukupolven asiantuntemusta jokaiseen luomaan työkaluun käyttämällä vain korkealaatuisimpia materiaaleja, ylivoimaista ammattitaitoa ja pitämällä valmistus mahdollisimman lähellä kotia. Klein ei ole vain yrityksemme nimi, se on myös sukunimemme. Ja koska olemme amerikkalainen perheyritys, joka on perheomisteinen, tiedät, että voit luottaa siihen, että olemme täällä huomenna. Klein Tools ei vain tee loistavia tuotteita, vaan me teemme upeita tuotteita, jotka kestävät niitä päivittäin käyttävien ammattilaisten vaatimukset... Vuodesta 1857 lähtien.

Määrä

Lisää ostoskoriin Osta nyt

EAN: 0092644652141

Luokat Työkalut & Kodinparannuslaitteet, Kone- ja käsityökalut, Konetyökalujen osat ja tarvikkeet, Konekiväärikärjet, Mutterinajopalat,

Valmistettu Yhdysvalloissa. Tip-Ident tunnistaa nopeasti mutterinvääntimen kuusiosuuntauksen ja koon värikoodaamalla kahvan päitä, jotta voit helposti kytkeä mutterinväännin kiinnittimeen. Cushion-Grip-kahvat mahdollistavat suuremman vääntömomentin ja mukavuuden, ja sisäiset laipat tarjoavat kiinteän, kiertymisenkestävän akseliankkurin. Työkalusarja sisältää Nut Driver Cat. Numerot: 630-3/16M, 630-1/4M, 630-5/16M, 630-11/32M, 630-3/8M, 630-7/16M, 630-1/2M. Muttereiden täysontto akseli, joka on suunniteltu harvinaisten maametallien magneettikärjeillä, helpottaa työskentelyä pitkissä pulttisovelluksissa.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Klein Tools
Brand	‎Klein Tools
Color	Black
Color	‎Black
Compatible Fastener Range	‎0.5 inches
Customer Reviews	4.7 4.7 out of 5 stars 325 ratings 4.7 out of 5 stars
Finish	‎Polished
Head Style	Hex
Head Style	‎Hex
Included Components	‎Tools/Accessories
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	13.4 x 7.5 x 1.5 inches
Item Dimensions LxWxH	‎13.4 x 7.5 x 1.5 inches
Item model number	‎631M
Item Package Quantity	‎1
Item Weight	‎0.2 Pounds
Item Weight	‎3.2 ounces
Manufacturer	‎Klein Tools
Measurement System	‎Inch
Model Name	‎631M
Number of Items	1
Number of Items	‎1
Number Of Pieces	‎7
Part Number	‎631M
Pattern	‎Tool
Power Source	‎Hand Powered
Product Dimensions	‎13.4 x 7.5 x 1.5 inches
Size	‎One Size
Style	‎Magnetic
Warranty Description	‎1 Year Manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: Scott Bloomquist

Could be deeper sockets

These are made well, my biggest disappointment is the depth. I tried using them today on those nylon inserted nuts that are slightly rounded at the top, these aren't deep enough to get past the rounded part, I had to switch to a socket set. These are fine for a standard sized nuts, I have couple cheap nut drivers that fit over any style nut.

Scritto da: Amazon Customer

Good Quality

Great Product Great Quality

Scritto da: Ray

Finally bought the entire set

I had previously purchased a few of these nutdrivers but not the whole set. After using them and then realizing that more and more I needed other sizes too, I decided to purchase the set. The high quality is what brought me back to these. They have a very strong magnet that will not lose it's hold. I had a hard time deciding whether to get these ones or the ones with the longer shank. I ended up settling on these because I realized that the longer ones wouldn't fit too well in the outside pockets of my toolbag, and would be sticking out too much. Didn't want to risk them falling out and losing one somewhere. Bought these and have been using them extensively ever since. As for the ones I bought before these...I gave them to my father to show him the quality and craftsmanship of these wonderful tools. These may seem to be on the pricey side, but I guarantee that you will not regret it and would purchase again if need be. Thanks for reading....Ray.

Scritto da: Leslie Adams

Klein. Enough said

Awesome tools

Scritto da: Derrick G.

Good Product

Expensive. Works well. Strong magnets. Highly recommended!

Scritto da: Austin Brandt

Magnetic set that actually grips!

Amazing set of nut drivers. I was working with the non magnetic Klein set before and they were awesome tools, however working from heights and over the head/shoulders work constantly without a magnetic set is really frustrating when you drop nuts all the time. Well worth the $20-$25 more than the standard set for the magnetic quality of it. A+

Scritto da: Evan T. 103

Awesome

I've only been working since July 2012 yet I primarily use Klein products. They have yet to let me down and this is no exception. The magnets are very strong. The grips are comfortable. I have nothing bad to say about this product. It's simply fantastic. You really can't go wrong with this set. It does exactly what you want when you want it basically. All in all, I highly recommend this to anyone who is looking for outstanding nut drivers. To make it clear... The sizes for this set is in inches... I had a bit of trouble figuring that out before I made the purchase. Wanted to give people a clear sign that the set was in inches. Way overdue update: Still a great set of nut drivers, magnets still work, still a comfortable grip... BUT, where the nut sits isn't deep enough to use for an acorn anchor. I have to use a coworker's driver or buy another one. A huge inconvenience.

Scritto da: Gerardo

Love the Magnet!!

I love these. They are magnetic and are hallow so that you may tighten up nuts on rod not longer than about 4 inches from the tightened position of the nut. They made new ones I think that can go all the way through and the rod just sticks out the back of the screwdriver but mine have been great. The magnets have stayed on and I've dropped my nut drivers from6 foot ladders plenty of times and the magnets are still there. Overall they have a great build quality. Worth the price.

Scritto da: Cal Shaw

Satisfactory

Comfortable