0
0

Oregon-ketjusaha Premium-teräsrasvapistooli 110534

Brand:Oregon

3.6/5

74.96

TUOTTEEN KUVAUS Ihanteellinen ammattilaisille ja toistuville käyttäjille, tämä ensiluokkainen teräsrasvapistooli zerk-sovittimella ja täyttöpatruunalla vähentää kitkaa ja parantaa suorituskykyä useissa moottorisahasovelluksissa. Auttaa estämään ennenaikaista kulumista, erityisesti terälevyn noissa. Zerk-adapteri ja yksi täyttöpatruuna mukana. Helppokäyttöinen, voidaan levittää yhdellä kädellä. Lisätäyttöpatruunoita voi ostaa erikseen. Yleinen tilavuus 82,69 in³ Tuote UOM Jokainen paino (pakkauksen kanssa) 0,03 Lb VALMISTAJALTA Oregon-leikkuuketjua käyttää alkuperäisvarusteena 90 prosenttia maailman moottorisahanvalmistajista ja useimmat maailman ammattimaiset metsurit, maanviljelijät ja talonomistajat. Miksi? Koska he haluavat sahansa tarjoavan vertaansa vailla olevaa leikkaustehoa ja korkeimman mahdollisen tuotetyytyväisyyden. Oregon tarjoaa käyttäjille seuraavaa: Kehittyneet valmistusmateriaalit, innovatiiviset tuoteominaisuudet ja poikkeuksellinen laatu, joka maksimoi moottorisahoihin sisäänrakennetun korkean arvon, Leikkuuketju, joka on ongelmaton --- joka leikkaa kaiken tyyppistä puutavaraa, pysyy pystyssä kaikissa sääolosuhteissa , ja pysyy koossa kaikissa leikkausolosuhteissa, Leikkuuketju, joka pysyy terävämpänä pidempään kuin useimmat sahankäyttäjät koskaan odottavat, mutta joka on helppo teroittaa uudelleen, kun aika tulee, Leikkuuketju, jota on valmistettu monessa eri tyypissä ja koossa useimpien sahojen tehoon ja käyttötarkoitukset, joihin kukin saha on suunniteltu, leikkuuketju, jossa on sisäänrakennetut voitelu-, teroitus-, alhainen tärinä ja takapotku, ja leikkuuketju, joka on vaihdettavissa kaikkialla maailmassa korkeimman mahdollisen tason varmistamiseksi asiakaspalvelusta ja tuesta. Ensimmäisen hakkuriketjun kehittämisestä yli puoli vuosisataa sitten Oregon on ollut ja on edelleen moottorisahan leikkausjärjestelmien teknologian kärjessä ja tuottaa edelleen edistyneintä saatavilla olevaa leikkausketjua. Oregon-rasvapistoolia käytetään vähentämään kitkaa ja parantamaan suorituskykyä erilaisissa moottorisahasovelluksissa

Mallinumero: 110534. Alkuperämaa: Saksa. Auttaa ehkäisemään ennenaikaista kulumista, erityisesti tangon nokana. Tuotemerkki: Oregon.
Customer Reviews 4.6 4.6 out of 5 stars 180 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer No
Item model number 110534
Item Weight 1.76 ounces
Manufacturer Oregon
Product Dimensions 8.8 x 6.2 x 0.6 inches

3.6

9 Review
5 Star
79
4 Star
11
3 Star
5
2 Star
2
1 Star
3

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: Randy Heatherly
Perfect little grease gun
Works perfectly
Scritto da: C. Lee
Hard to load but works fine
I load synthetic grease onto it and it’s a very messy process. The device works very well in what it is designed for - pushing grease into the nose sprocket of a chainsaw bar. I like the small size making it easy to carry in a chainsaw case.
Scritto da: Nathan W.
chainsaw must have
Ever used one of those chain saw grease guns that you push and push and nothing comes out? Me too, very frustrating, so I bought this and couldn't be happier. It works when you want it to and works well.
Scritto da: Artmon
Works Great
This little Grease Gun works perfectly. Easy to load cartridges, and easy to use. The Instructions on the backside of the package, however, are downright confusing if you intend on using Cartridges. Apparently much was lost being translated from German to English. Hint: If you're using Grease Cartridges, you won't need the Inner Plastic Plunger W/Chain; so leave it out. Use that part only if you intend on filling it full of raw non-cartridged Grease. The Cartridges make it soooooooo simple and soooooo easy. Using the Oregon Cartridge Refills is by far the best approach. 1: Remove the Outer Lower-Cap from the Grease Gun Body. 2: Remove the Inner Plastic Plunger from the Grease Gun, and store it somewhere. 3: Unpack one of the Oregon Grease Cartridges, and remove the protective End-Cap from the Cartridge. 4: Scoot the Cartridge up-Inside the Gun Body, with the 'Open End of the cartridge' Toward the Inside of the Gun. 5: After Cartridge is All The Way Inside, use your Thumb to 'Push' the Lower Plastic Cap at the Bottom of the Cartridge, until it "Bottoms Out". (There's lots of Air in the Gun Body, so you have to 'Bleed it Out'). 5: After you've completed the above, Test the unit to confirm it's Ready. If not, Air or Obstructions could be the cause. 6: Lastly, place the Outer Lower-Cap back onto the bottom of the Grease Gun and go to work.
Scritto da: Gregp
A must have
Every time I sharpen my chainsaw I grease the bar. The most often forgotten part any chainsaw that uses Oregon Bars is the grease is the sprocket on the tip. A must grease and grease gun for all chainsaw bars to protect expensive parts.
Scritto da: James Wood
Handy tool to have!
I bought this for chainsaw bars, but it turns out the thing works good for other things as well. You can actually use it on a regular zerk even. So far it seems to be sturdy enough to put up with living in the "chainsaw stuff crate".
Scritto da: Roy
Good Grease
Use this th grease your bar sprocket and the clutch bearing if your saw's crank is drilled to accept grease. This is easy to use with gloves, and will accept bulk grease or cartridges. I started with the cartrige that came with it, but now I just fill it from the end with a grease gun. The gun draws well, and I haven't had any trouble with it at all. I did spray paint mine safety yellow before I got it all greasy, and It's held the paint well. Update: I came across this review again, and it's been four years since I wrote it. This little grease gun is still in my saw box, which must mean that the yellow paint was worth it. It's also still working like new.
Scritto da: Anthony Inkell
Good grease gun
I was thinking that I would give it a try and I am sure glad I did best grease gun for a chain saw I have had.
Scritto da: Bill Riddell
It is as claimed
Works well as advertised

Liittyvät tuotteet

hot
Husqvarna X-Force -ketjusahatanko, hopea
0.1/5

€ 99.19

Husqvarna X-Force -ketjusahatanko, hopea
0.1/5

€ 99.19

hot
Stens 705-590 T-avain, hopea
0.1/5

€ 40.81

Stens 705-590 T-avain, hopea
0.1/5

€ 40.81

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array