POWERTEC 15504-P2 valkoinen alumiinioksidihiomalaikka, 8 x 1, 5/8 kara, 60 karkeus, 2 PK 60 karkeus, 2 pk

Name: POWERTEC 15504-P2 valkoinen alumiinioksidihiomalaikka, 8 x 1, 5/8 kara, 60 karkeus, 2 PK 60 karkeus, 2 pk
Brand: POWERTEC
SKU: 0843441120476
Price: 97.72 EUR
Availability: InStock

Brand:POWERTEC

3.4/5

€
97.72

Esittelyssä POWERTEC:n 8 tuuman 60 karkeuden valkoinen alumiinioksidihiomalaikka. Tämä 8 penkkihiomalaikka on suunniteltu sopimaan useimpiin kiinteisiin penkkihiomakoneisiin nopean teräksen teroittamiseen ja jäysteenpoistoon. Siinä on korkealuokkainen valkoinen alumiinioksidi, jossa on lasitettu sidos. Kun tämä hioma-aine hiotaan kulumisen myötä, se tuottaa tasaisen ja raikkaan hiomapinnan tasapainoiseen työskentelyyn. Teroitatpa sitten metallisorvin sorvaustyökaluja, ruohonleikkurin teriä tai muita HSS-työkaluja – tämä hiomalaikkakive tekee työsi erittäin tarkasti. Yleisesti käytetyt sovellukset * Ruohonleikkurin terän teroitustyökalu * Metallisorvin teroitus * HSS-poranterien teroitus * Höylä Teränteroitin * Taltan teroitustyökalu (Ei ole suositeltavaa hioa puuta, muovia tai muuta ei-metallista materiaalia penkillä tai jalustalla.) Tekniset tiedot * Hiomalaikan halkaisija: 8 tuumaa * Paksuus: 1 tuumaa * Karan reiän koko: 5/8 tuumaa * Materiaali: valkoinen alumiinioksidi (alundum) * sidos: lasitettu * hiekkatyyppi: 60 * maksimikierrosluku: 3600

Määrä

Lisää ostoskoriin Osta nyt

EAN: 0843441120476

Luokat Teollinen & Tieteellinen, Hionta- ja viimeistelytuotteet, Hiontapyörät ja -lautaset, Pöydän ja jalustan hionta Wheels,

LAATUTIEDOT: Ensiluokkaisen valkoisen alumiinioksidipyörän halkaisija on 8 tuumaa, paksuus 1, sen reiän koko on 5/8, ja sen enimmäiskierrosluku on 3 450. OMINAISUUDET: Suurin leikkausnopeus ja viileä leikkaustoiminto karkaistuilla tai nopealla työkaluteräksillä. YHTEENSOPIVUUS: 8 . penkkihiomalaikka on suunniteltu sopimaan ja toimimaan useimpien jalusta- ja penkkihiomakoneiden kanssa. SOVELLUKSET: Medium 60 Grit hiomalaikka toimii poikkeuksellisen hyvin teräksellä, ja sitä voidaan käyttää puunpoistoon tai poranterän teroitustyökaluna tai osana sorvin työkalun teroitusjärjestelmää. SISÄLTÄÄ: (2) Penkkihiomakoneen hiomalaikka lasitetulla sidoksella.

Brand	POWERTEC
Compatible Devices	Bench Grinder
Country of Origin	China
Grit Material	Aluminum Oxide
Grit Number	60
Grit Type	Medium
Item model number	15504-P2
Manufacturer	POWERTEC
Package Dimensions	9 x 9 x 3 inches; 7.65 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: JOAT

Average

It was not really round, but a little work on trueing it up and it will work.

Scritto da: Jeff P.

Fits perfect

Fast delivery,fits good

Scritto da: Jeff Dahl

Cuts great, but mine was chipped

This wheel cuts great, I use it for hollow grinding chisels. It cuts so much cooler than silicon carbide wheels so the chisel doesn't get overheated and lose hardness. It makes a world of difference. But my wheel came with a big chip in the edge. It comes in a good box so it should not have happened.

Scritto da: Roscoe

took two tries to get a good one

the first one I ordered came barely packaged, arrived with a big chip out of the rim. The second one, slightly better packaged, came with only a small chip. I needed it, I mounted it. It did not run true (grinder shaft runs true) and needed dressing to run well. It's a cheap wheel, I got what I paid for.

Scritto da: Annie

Works perfectly

Needed in my husband's workshop. Ordered two, one was broken, and amazon/the company sent us a replacement the next day! very pleased with such good service.

Scritto da: Rick A. Matschke

Made my grinder wobble.

Perhaps I bought a bad wheel but it had to be removed shortly as it got worse and worse quickly.

Scritto da: William C. Slade

Well made grinding wheel.

My original grinding wheel was worn down and it no longer was balanced-making the entire machine vibrate very bad. I put the new wheel on and the vibrations completely stopped. It appears to be well made and works very well. I would buy this grinding wheel again!

Scritto da: Heidi G

Redused price beware

When I bought this reduced I didn't know it had a chip. I would not have bothered. Should've been in the description

Scritto da: busybody

As decribed/required

Sharpening wood turning tools

Scritto da: Gary Larsen

Works as expected

So far so good. Fit my grinder well, was easy to replace. I also have a jig that I’ve had for many years but not setup, so set that up and sharpened about a dozen chisels… some duller than a bread knife. Worked really well… the grit level is appropriate for my needs and didn’t need a lot of fine tuning afterwards. As mentioned.. sharpened about a dozen chisels and also some hand planer blades and the stone is still pretty flat and usable.

Scritto da: Peter

Decent quality wheel

The edges were chipped and the grinder now vibrates far more that it did. There are no instructions. I did find instructions on-line for a similar product from Jet and followed them. I had to rotate the stone many times by a few degrees on the arbor and re-tighten to get the runout to reasonable levels. It does grind very well and I was able to sharpen chisels without burning them. It does make a mess on the surface below but I expect this is because it is friable. I don't have a more expensive stone like the one from Norton stone to compare it with so perhaps these are not really unexpected problems. Bottom line: good value for sharpening tools without burning them (you will still need to dip the tool in water after a few seconds at 3600 rpm to cool it), did not self destruct at 3600 RPM (no speed rating given on wheel so I was nervous) and you will need to spend an hour or so carefully adjusting it to get everything balanced. You had might as well get a felt wheel for the other side of the grinder and an external tool rest to make a first class grinding station.

Scritto da: Brian from Alberta

good quality

I have no issues with this grinding wheel, its solid and well made. Works well for dressing lawn mower blades and general fabrication of all kinds of steels. Make sure your rotational speed is not faster than the max listed on the stone.

Scritto da: R.Mark Williams

Great value

Good value and does the job well.